Ispezione del testo per l'individuazione di dati sensibili

Sensitive Data Protection può rilevare e classificare i dati sensibili all'interno dei contenuti text. Dato l'input di testo, l'API DLP restituisce i dettagli di eventuali infoTypes trovati nel testo, un valore di probabilità e informazioni sull'offset.

Best practice

Identificare e dare priorità alla scansione

È importante identificare le risorse e specificare quelle con la priorità più elevata per l'analisi. Quando inizi, potresti avere un grande backlog di dati che richiedono la classificazione e sarà impossibile scansionarli tutti immediatamente. Scegli inizialmente i dati che rappresentano il rischio più elevato, ad esempio quelli a cui si accede di frequente, ampiamente accessibili o sconosciuti.

Riduci la latenza

La latenza è influenzata da diversi fattori: la quantità di dati da analizzare, il repository di archiviazione sottoposto a scansione e il tipo e il numero di infoType abilitati.

Per contribuire a ridurre la latenza dei job, puoi provare a:

  • Attiva il campionamento.
  • Evita di attivare infoType che non ti servono. Sebbene utili in alcuni scenari, alcuni infoType, tra cui PERSON_NAME, FEMALE_NAME, MALE_NAME, FIRST_NAME, LAST_NAME, DATE_OF_BIRTH, LOCATION, STREET_ADDRESS, ORGANIZATION_NAME, possono rallentare notevolmente l'esecuzione delle richieste rispetto a quelle che non li includono.
  • Specifica sempre gli infoType in modo esplicito. Non utilizzare un elenco infoTypes vuoto.
  • Se possibile, valuta la possibilità di organizzare i dati da ispezionare in una tabella con righe e colonne per ridurre i viaggi di andata e ritorno sulla rete.

Limitare l'ambito delle prime scansioni

Per risultati ottimali, limita l'ambito delle prime scansioni anziché eseguire la scansione di tutti i dati. Inizia con alcune richieste. I risultati saranno più significativi quando perfezionerai i rilevatori da attivare e le regole di esclusione potrebbero essere necessarie per ridurre i falsi positivi. Evita di attivare tutti gli infoType se non ne hai bisogno, poiché i falsi positivi o i risultati inutilizzabili possono rendere più difficile la valutazione del rischio. Sebbene utili in determinati scenari, alcuni infoType come DATE, TIME, DOMAIN_NAME e URL rilevano una vasta gamma di risultati e potrebbe non essere utile attivarli.

Scansioni on-premise, ibride e multi-cloud

Se i dati da sottoporre a scansione si trovano on-premise o al di fuori di Google Cloud, utilizza i metodi API content.inspect e content.deidentify per eseguire la scansione dei contenuti al fine di classificare i risultati e pseudonimizzarli senza memorizzarli al di fuori dello spazio di archiviazione locale.

Ispezione di una stringa di testo

Di seguito sono riportati JSON e codice di esempio in diversi linguaggi che mostrano come utilizzare l'API DLP per ispezionare stringhe di testo alla ricerca di dati sensibili.

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 


using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.InspectConfig.Types;

public class InspectString
{
    public static InspectContentResponse Inspect(
        string projectId,
        string dataValue,
        string minLikelihood,
        int maxFindings,
        bool includeQuote,
        IEnumerable<InfoType> infoTypes,
        IEnumerable<CustomInfoType> customInfoTypes)
    {
        var inspectConfig = new InspectConfig
        {
            MinLikelihood = (Likelihood)Enum.Parse(typeof(Likelihood), minLikelihood, true),
            Limits = new FindingLimits
            {
                MaxFindingsPerRequest = maxFindings
            },
            IncludeQuote = includeQuote,
            InfoTypes = { infoTypes },
            CustomInfoTypes = { customInfoTypes }
        };
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = new ContentItem
            {
                Value = dataValue
            },
            InspectConfig = inspectConfig
        };

        var dlp = DlpServiceClient.Create();
        var response = dlp.InspectContent(request);

        PrintResponse(includeQuote, response);

        return response;
    }

    private static void PrintResponse(bool includeQuote, InspectContentResponse response)
    {
        var findings = response.Result.Findings;
        if (findings.Any())
        {
            Console.WriteLine("Findings:");
            foreach (var finding in findings)
            {
                if (includeQuote)
                {
                    Console.WriteLine($"  Quote: {finding.Quote}");
                }
                Console.WriteLine($"  InfoType: {finding.InfoType}");
                Console.WriteLine($"  Likelihood: {finding.Likelihood}");
            }
        }
        else
        {
            Console.WriteLine("No findings.");
        }
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectString inspects the a given string, and prints results.
func inspectString(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "My name is Gary and my email is gary@example.com"
	ctx := context.Background()

	// Initialize client.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}
	defer client.Close() // Closing the client safely cleans up background resources.

	// Create and send the request.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item: &dlppb.ContentItem{
			DataItem: &dlppb.ContentItem_Value{
				Value: textToInspect,
			},
		},
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: []*dlppb.InfoType{
				{Name: "PHONE_NUMBER"},
				{Name: "EMAIL_ADDRESS"},
				{Name: "CREDIT_CARD_NUMBER"},
			},
			IncludeQuote: true,
		},
	}
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	result := resp.Result
	fmt.Fprintf(w, "Findings: %d\n", len(result.Findings))
	for _, f := range result.Findings {
		fmt.Fprintf(w, "\tQuote: %s\n", f.Quote)
		fmt.Fprintf(w, "\tInfo type: %s\n", f.InfoType.Name)
		fmt.Fprintf(w, "\tLikelihood: %s\n", f.Likelihood)
	}
	return nil
}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.LocationName;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectString {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "My name is Gary and my email is gary@example.com";
    inspectString(projectId, textToInspect);
  }

  // Inspects the provided text.
  public static void inspectString(String projectId, String textToInspect) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      List<InfoType> infoTypes = new ArrayList<>();
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder().addAllInfoTypes(infoTypes).setIncludeQuote(true).build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'My name is Gary and my email is gary@example.com';

// The minimum likelihood required before returning a match
// const minLikelihood = 'LIKELIHOOD_UNSPECIFIED';

// The maximum number of findings to report per request (0 = server maximum)
// const maxFindings = 0;

// The infoTypes of information to match
// const infoTypes = [{ name: 'PHONE_NUMBER' }, { name: 'EMAIL_ADDRESS' }, { name: 'CREDIT_CARD_NUMBER' }];

// The customInfoTypes of information to match
// const customInfoTypes = [{ infoType: { name: 'DICT_TYPE' }, dictionary: { wordList: { words: ['foo', 'bar', 'baz']}}},
//   { infoType: { name: 'REGEX_TYPE' }, regex: {pattern: '\\(\\d{3}\\) \\d{3}-\\d{4}'}}];

// Whether to include the matching string
// const includeQuote = true;

async function inspectString() {
  // Construct item to inspect
  const item = {value: string};

  // Construct request
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: {
      infoTypes: infoTypes,
      customInfoTypes: customInfoTypes,
      minLikelihood: minLikelihood,
      includeQuote: includeQuote,
      limits: {
        maxFindingsPerRequest: maxFindings,
      },
    },
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log('Findings:');
    findings.forEach(finding => {
      if (includeQuote) {
        console.log(`\tQuote: ${finding.quote}`);
      }
      console.log(`\tInfo type: ${finding.infoType.name}`);
      console.log(`\tLikelihood: ${finding.likelihood}`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectString();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\Likelihood;

/**
 * @param string $projectId
 * @param string $textToInspect
 */
function inspect_string(string $projectId, string $textToInspect): void
{
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    // Construct request
    $parent = "projects/$projectId/locations/global";
    $item = (new ContentItem())
        ->setValue($textToInspect);
    $inspectConfig = (new InspectConfig())
        // The infoTypes of information to match
        ->setInfoTypes([
            (new InfoType())->setName('PHONE_NUMBER'),
            (new InfoType())->setName('EMAIL_ADDRESS'),
            (new InfoType())->setName('CREDIT_CARD_NUMBER')
        ])
        // Whether to include the matching string
        ->setIncludeQuote(true);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        print('No findings.' . PHP_EOL);
    } else {
        print('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            print('  Quote: ' . $finding->getQuote() . PHP_EOL);
            print('  Info type: ' . $finding->getInfoType()->getName() . PHP_EOL);
            $likelihoodString = Likelihood::name($finding->getLikelihood());
            print('  Likelihood: ' . $likelihoodString . PHP_EOL);
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

from typing import List

import google.cloud.dlp


def inspect_string(
    project: str,
    content_string: str,
    info_types: List[str],
    custom_dictionaries: List[str] = None,
    custom_regexes: List[str] = None,
    min_likelihood: str = None,
    max_findings: str = None,
    include_quote: bool = True,
) -> None:
    """Uses the Data Loss Prevention API to analyze strings for protected data.
    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        info_types: A list of strings representing info types to look for.
            A full list of info type categories can be fetched from the API.
        min_likelihood: A string representing the minimum likelihood threshold
            that constitutes a match. One of: 'LIKELIHOOD_UNSPECIFIED',
            'VERY_UNLIKELY', 'UNLIKELY', 'POSSIBLE', 'LIKELY', 'VERY_LIKELY'.
        max_findings: The maximum number of findings to report; 0 = no maximum.
        include_quote: Boolean for whether to display a quote of the detected
            information in the results.
    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Prepare info_types by converting the list of strings into a list of
    # dictionaries (protos are also accepted).
    info_types = [{"name": info_type} for info_type in info_types]

    # Prepare custom_info_types by parsing the dictionary word lists and
    # regex patterns.
    if custom_dictionaries is None:
        custom_dictionaries = []
    dictionaries = [
        {
            "info_type": {"name": f"CUSTOM_DICTIONARY_{i}"},
            "dictionary": {"word_list": {"words": custom_dict.split(",")}},
        }
        for i, custom_dict in enumerate(custom_dictionaries)
    ]
    if custom_regexes is None:
        custom_regexes = []
    regexes = [
        {
            "info_type": {"name": f"CUSTOM_REGEX_{i}"},
            "regex": {"pattern": custom_regex},
        }
        for i, custom_regex in enumerate(custom_regexes)
    ]
    custom_info_types = dictionaries + regexes

    # Construct the configuration dictionary. Keys which are None may
    # optionally be omitted entirely.
    inspect_config = {
        "info_types": info_types,
        "custom_info_types": custom_info_types,
        "min_likelihood": min_likelihood,
        "include_quote": include_quote,
        "limits": {"max_findings_per_request": max_findings},
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            try:
                if finding.quote:
                    print(f"Quote: {finding.quote}")
            except AttributeError:
                pass
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

Ruby

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

# project_id   = "Your Google Cloud project ID"
# content      = "The text to inspect"
# max_findings = "Maximum number of findings to report per request (0 = server maximum)"

require "google/cloud/dlp"

dlp = Google::Cloud::Dlp.dlp_service
inspect_config = {
  # The types of information to match
  info_types:     [{ name: "PERSON_NAME" }, { name: "US_STATE" }],

  # Only return results above a likelihood threshold (0 for all)
  min_likelihood: :POSSIBLE,

  # Limit the number of findings (0 for no limit)
  limits:         { max_findings_per_request: max_findings },

  # Whether to include the matching string in the response
  include_quote:  true
}

# The item to inspect
item_to_inspect = { value: content }

# Run request
parent = "projects/#{project_id}/locations/global"
response = dlp.inspect_content parent:         parent,
                               inspect_config: inspect_config,
                               item:           item_to_inspect

# Print the results
if response.result.findings.empty?
  puts "No findings"
else
  response.result.findings.each do |finding|
    puts "Quote:      #{finding.quote}"
    puts "Info type:  #{finding.info_type.name}"
    puts "Likelihood: #{finding.likelihood}"
  end
end

REST

Per ulteriori informazioni sull'utilizzo dell'API DLP con JSON, consulta la guida introduttiva JSON.

Input JSON:

POST https://dlp.googleapis.com/v2/projects/[PROJECT_ID]/content:inspect?key={YOUR_API_KEY}

{
  "item":{
    "value":"My phone number is (415) 555-0890"
  },
  "inspectConfig":{
    "includeQuote":true,
    "minLikelihood":"POSSIBLE",
    "infoTypes":{
      "name":"PHONE_NUMBER"
    }
  }
}

Output JSON:

{
  "result":{
    "findings":[
      {
        "quote":"(415) 555-0890",
        "infoType":{
          "name":"PHONE_NUMBER"
        },
        "likelihood":"VERY_LIKELY",
        "location":{
          "byteRange":{
            "start":"19",
            "end":"33"
          },
          "codepointRange":{
            "start":"19",
            "end":"33"
          }
        },
        "createTime":"2018-11-13T19:29:15.412Z"
      }
    ]
  }
}

Ispezione di un file di testo

Gli esempi di codice riportati di seguito mostrano come verificare la presenza di contenuti sensibili in un file di testo.

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 


using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using Google.Protobuf;
using static Google.Cloud.Dlp.V2.ByteContentItem.Types;

public class DlpInspectFile
{
    public static IEnumerable<Finding> InspectFile(string projectId, string filePath, BytesType fileType)
    {
        // Instantiate a client.
        var dlp = DlpServiceClient.Create();

        // Get the bytes from the file.
        ByteString fileBytes;
        using (Stream f = new FileStream(filePath, FileMode.Open))
        {
            fileBytes = ByteString.FromStream(f);
        }

        // Construct a request.
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = new ContentItem
            {
                ByteItem = new ByteContentItem()
                {
                    Data = fileBytes,
                    Type = fileType
                }
            },
            InspectConfig = new InspectConfig
            {
                // The info types of information to match
                InfoTypes =
                {
                    new InfoType { Name = "PHONE_NUMBER" },
                    new InfoType { Name = "EMAIL_ADDRESS" },
                    new InfoType { Name = "CREDIT_CARD_NUMBER" }
                },
                // The minimum likelihood before returning a match
                MinLikelihood = Likelihood.Unspecified,
                // Whether to include the matching string
                IncludeQuote = true,
                Limits = new InspectConfig.Types.FindingLimits
                {
                    // The maximum number of findings to report per request
                    // (0 = server maximum)
                    MaxFindingsPerRequest = 0
                }
            }
        };

        // Execute request
        var response = dlp.InspectContent(request);

        // Inspect response
        var findings = response.Result.Findings;
        if (findings.Any())
        {
            Console.WriteLine("Findings:");
            foreach (var finding in findings)
            {
                Console.WriteLine($"Quote: {finding.Quote}");
                Console.WriteLine($"InfoType: {finding.InfoType}");
                Console.WriteLine($"Likelihood: {finding.Likelihood}");
            }
        }
        else
        {
            Console.WriteLine("No findings.");
        }
        return findings;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

import (
	"context"
	"fmt"
	"io"
	"io/ioutil"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectTextFile inspects a text file at a given filePath, and prints results.
func inspectTextFile(w io.Writer, projectID, filePath string) error {
	// projectID := "my-project-id"
	// filePath := "path/to/image.png"
	ctx := context.Background()

	// Initialize client.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}
	defer client.Close() // Closing the client safely cleans up background resources.

	// Gather the resources for the request.
	data, err := ioutil.ReadFile(filePath)
	if err != nil {
		return err
	}

	// Create and send the request.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item: &dlppb.ContentItem{
			DataItem: &dlppb.ContentItem_ByteItem{
				ByteItem: &dlppb.ByteContentItem{
					Type: dlppb.ByteContentItem_TEXT_UTF8,
					Data: data,
				},
			},
		},
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: []*dlppb.InfoType{
				{Name: "PHONE_NUMBER"},
				{Name: "EMAIL_ADDRESS"},
				{Name: "CREDIT_CARD_NUMBER"},
			},
			IncludeQuote: true,
		},
	}
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return fmt.Errorf("InspectContent: %w", err)
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %d\n", len(resp.Result.Findings))
	for _, f := range resp.Result.Findings {
		fmt.Fprintf(w, "\tQuote: %s\n", f.Quote)
		fmt.Fprintf(w, "\tInfo type: %s\n", f.InfoType.Name)
		fmt.Fprintf(w, "\tLikelihood: %s\n", f.Likelihood)
	}
	return nil
}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.LocationName;
import com.google.protobuf.ByteString;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectTextFile {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String filePath = "path/to/file.txt";
    inspectTextFile(projectId, filePath);
  }

  // Inspects the specified text file.
  public static void inspectTextFile(String projectId, String filePath) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteString fileBytes = ByteString.readFrom(new FileInputStream(filePath));
      ByteContentItem byteItem =
          ByteContentItem.newBuilder().setType(BytesType.TEXT_UTF8).setData(fileBytes).build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      List<InfoType> infoTypes = new ArrayList<>();
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder().addAllInfoTypes(infoTypes).setIncludeQuote(true).build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Import other required libraries
const fs = require('fs');
const mime = require('mime');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The path to a local file to inspect. Can be a text, JPG, or PNG file.
// const filepath = 'path/to/image.png';

// The minimum likelihood required before returning a match
// const minLikelihood = 'LIKELIHOOD_UNSPECIFIED';

// The maximum number of findings to report per request (0 = server maximum)
// const maxFindings = 0;

// The infoTypes of information to match
// const infoTypes = [{ name: 'PHONE_NUMBER' }, { name: 'EMAIL_ADDRESS' }, { name: 'CREDIT_CARD_NUMBER' }];

// The customInfoTypes of information to match
// const customInfoTypes = [{ infoType: { name: 'DICT_TYPE' }, dictionary: { wordList: { words: ['foo', 'bar', 'baz']}}},
//   { infoType: { name: 'REGEX_TYPE' }, regex: {pattern: '\\(\\d{3}\\) \\d{3}-\\d{4}'}}];

// Whether to include the matching string
// const includeQuote = true;

async function inspectFile() {
  // Construct file data to inspect
  const fileTypeConstant =
    ['image/jpeg', 'image/bmp', 'image/png', 'image/svg'].indexOf(
      mime.getType(filepath)
    ) + 1;
  const fileBytes = Buffer.from(fs.readFileSync(filepath)).toString('base64');
  const item = {
    byteItem: {
      type: fileTypeConstant,
      data: fileBytes,
    },
  };

  // Construct request
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: {
      infoTypes: infoTypes,
      customInfoTypes: customInfoTypes,
      minLikelihood: minLikelihood,
      includeQuote: includeQuote,
      limits: {
        maxFindingsPerRequest: maxFindings,
      },
    },
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log('Findings:');
    findings.forEach(finding => {
      if (includeQuote) {
        console.log(`\tQuote: ${finding.quote}`);
      }
      console.log(`\tInfo type: ${finding.infoType.name}`);
      console.log(`\tLikelihood: ${finding.likelihood}`);
    });
  } else {
    console.log('No findings.');
  }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

import mimetypes
from typing import List
from typing import Optional

import google.cloud.dlp


def inspect_file(
    project: str,
    filename: str,
    info_types: List[str],
    min_likelihood: str = None,
    custom_dictionaries: List[str] = None,
    custom_regexes: List[str] = None,
    max_findings: Optional[int] = None,
    include_quote: bool = True,
    mime_type: str = None,
) -> None:
    """Uses the Data Loss Prevention API to analyze a file for protected data.
    Args:
        project: The Google Cloud project id to use as a parent resource.
        filename: The path to the file to inspect.
        info_types: A list of strings representing info types to look for.
            A full list of info type categories can be fetched from the API.
        min_likelihood: A string representing the minimum likelihood threshold
            that constitutes a match. One of: 'LIKELIHOOD_UNSPECIFIED',
            'VERY_UNLIKELY', 'UNLIKELY', 'POSSIBLE', 'LIKELY', 'VERY_LIKELY'.
        max_findings: The maximum number of findings to report; 0 = no maximum.
        include_quote: Boolean for whether to display a quote of the detected
            information in the results.
        mime_type: The MIME type of the file. If not specified, the type is
            inferred via the Python standard library's mimetypes module.
    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Prepare info_types by converting the list of strings into a list of
    # dictionaries (protos are also accepted).
    if not info_types:
        info_types = ["FIRST_NAME", "LAST_NAME", "EMAIL_ADDRESS"]
    info_types = [{"name": info_type} for info_type in info_types]

    # Prepare custom_info_types by parsing the dictionary word lists and
    # regex patterns.
    if custom_dictionaries is None:
        custom_dictionaries = []
    dictionaries = [
        {
            "info_type": {"name": f"CUSTOM_DICTIONARY_{i}"},
            "dictionary": {"word_list": {"words": custom_dict.split(",")}},
        }
        for i, custom_dict in enumerate(custom_dictionaries)
    ]
    if custom_regexes is None:
        custom_regexes = []
    regexes = [
        {
            "info_type": {"name": f"CUSTOM_REGEX_{i}"},
            "regex": {"pattern": custom_regex},
        }
        for i, custom_regex in enumerate(custom_regexes)
    ]
    custom_info_types = dictionaries + regexes

    # Construct the configuration dictionary. Keys which are None may
    # optionally be omitted entirely.
    inspect_config = {
        "info_types": info_types,
        "custom_info_types": custom_info_types,
        "min_likelihood": min_likelihood,
        "include_quote": include_quote,
        "limits": {"max_findings_per_request": max_findings},
    }

    # If mime_type is not specified, guess it from the filename.
    if mime_type is None:
        mime_guess = mimetypes.MimeTypes().guess_type(filename)
        mime_type = mime_guess[0]

    # Select the content type index from the list of supported types.
    # https://github.com/googleapis/googleapis/blob/master/google/privacy/dlp/v2/dlp.proto / message ByteContentItem
    supported_content_types = {
        None: 0,  # "Unspecified" or BYTES_TYPE_UNSPECIFIED
        "image/jpeg": 1,  # IMAGE_JPEG
        "image/bmp": 2,  # IMAGE_BMP
        "image/png": 3,  # IMAGE_PNG
        "image/svg": 4,  # IMAGE_SVG - Adjusted to "image/svg+xml" for correct MIME type
        "text/plain": 5,  # TEXT_UTF8
        # Note: No specific MIME type for general "image", mapping to IMAGE for any image type not specified
        "image": 6,  # IMAGE - Any image type
        "application/msword": 7,  # WORD_DOCUMENT
        "application/pdf": 8,  # PDF
        "application/powerpoint": 9,  # POWERPOINT_DOCUMENT
        "application/msexcel": 10,  # EXCEL_DOCUMENT
        "application/avro": 11,  # AVRO
        "text/csv": 12,  # CSV
        "text/tsv": 13,  # TSV
    }
    content_type_index = supported_content_types.get(mime_type, 0)

    # Construct the item, containing the file's byte data.
    with open(filename, mode="rb") as f:
        item = {"byte_item": {"type_": content_type_index, "data": f.read()}}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            try:
                print(f"Quote: {finding.quote}")
            except AttributeError:
                pass
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

Ruby

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per ulteriori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale. 

# project_id   = "Your Google Cloud project ID"
# filename     = "The file path to the file to inspect"
# max_findings = "Maximum number of findings to report per request (0 = server maximum)"

require "google/cloud/dlp"

dlp = Google::Cloud::Dlp.dlp_service
inspect_config = {
  # The types of information to match
  info_types:     [{ name: "PERSON_NAME" }, { name: "PHONE_NUMBER" }],

  # Only return results above a likelihood threshold (0 for all)
  min_likelihood: :POSSIBLE,

  # Limit the number of findings (0 for no limit)
  limits:         { max_findings_per_request: max_findings },

  # Whether to include the matching string in the response
  include_quote:  true
}

# The item to inspect
file = File.open filename, "rb"
item_to_inspect = { byte_item: { type: :BYTES_TYPE_UNSPECIFIED, data: file.read } }

# Run request
parent = "projects/#{project_id}/locations/global"
response = dlp.inspect_content parent:         parent,
                               inspect_config: inspect_config,
                               item:           item_to_inspect

# Print the results
if response.result.findings.empty?
  puts "No findings"
else
  response.result.findings.each do |finding|
    puts "Quote:      #{finding.quote}"
    puts "Info type:  #{finding.info_type.name}"
    puts "Likelihood: #{finding.likelihood}"
  end
end

Passaggi successivi