Personalizzazione della probabilità di corrispondenza

Utilizzando le regole hotword, puoi estendere ulteriormente i rilevatori infoType incorporati e personalizzati con regole di contesto efficaci. Una regola hotword indica a Sensitive Data Protection di aggiustare la probabilità di un rilevamento, a seconda che una hotword si verifichi nelle vicinanze del rilevamento. Una regola hotword è un tipo di regola di ispezione, specificata nei set di regole. Ogni regola viene applicata a un insieme di infoType incorporati o personalizzati.

Anatomia di una regola hotword

Un rilevatore di infoType può avere zero o più regole hotword. Nella configurazione dell'ispezione, definisci ogni oggetto HotwordRule all'interno dell'array rules, come segue:

"rules":[
  {
    "hotwordRule":{
      "hotwordRegex":{
        "pattern":"REGEX_PATTERN"
      },
      "proximity":{
        "windowAfter":"NUM_CHARS_TO_CONSIDER_AFTER_FINDING",
        "windowBefore":"NUM_CHARS_TO_CONSIDER_BEFORE_FINDING"
      }
      "likelihoodAdjustment":{
        "fixedLikelihood":"LIKELIHOOD_VALUE"
             -- OR --
        "relativeLikelihood":"LIKELIHOOD_ADJUSTMENT"
      },
    }
  },
  ...
]

Sostituisci quanto segue:

• REGEX_PATTERN: un'espressione regolare (oggetto Regex) che definisce cosa si qualifica come hotword.
• NUM_CHARS_TO_CONSIDER_AFTER_FINDING: un intervallo di caratteri dopo la rilevazione. Sensitive Data Protection analizza questo intervallo per determinare se una hotword si verifica nelle vicinanze del rilevamento.

• NUM_CHARS_TO_CONSIDER_BEFORE_FINDING: un intervallo di caratteri prima del risultato. Sensitive Data Protection analizza questo intervallo per determinare se una hotword si verifica nelle vicinanze del rilevamento.

• LIKELIHOOD_VALUE: un livello Likelihood fisso su cui impostare il rilevamento.

• LIKELIHOOD_ADJUSTMENT: un numero che indica quanto Sensitive Data Protection deve aumentare o diminuire la probabilità del rilevamento. Un numero intero positivo aumenta il livello di probabilità, mentre un numero intero negativo lo diminuisce. Ad esempio, se un risultato sarebbe POSSIBLE senza la regola di rilevamento e relativeLikelihood è 1, il risultato viene eseguito l'upgrade a LIKELY. Se relativeLikelihood è -1, il livello del rilevamento viene abbassato a UNLIKELY. La probabilità non può mai scendere al di sotto di VERY_UNLIKELY o superare VERY_LIKELY. In questi casi, il livello di probabilità rimane invariato. Ad esempio, se la probabilità di base è VERY_LIKELY e relativeLikelihood è 1, la probabilità finale rimane VERY_LIKELY.

Esempio di hotword: trova i numeri dei referti medici

Supponiamo che tu voglia rilevare un infoType personalizzato, ad esempio un numero di record medico (MRN), nel formato "###-#-#####". Inoltre, vuoi che la Protezione dei dati sensibili aumenti la probabilità di corrispondenza di ogni risultato che segue la hotword "MRN".

Valori di esempio:

• 123-4-56789 corrisponde a POSSIBLE.
• La cartella clinica 123-4-56789 corrisponde a VERY_LIKELY.

L'esempio JSON e gli snippet di codice seguenti mostrano come configurare la regola hotword. Questo esempio utilizza un rilevatore di espressioni regolari personalizzate.

In questo esempio, tieni presente quanto segue:

• La richiesta definisce l'infoType personalizzato C_MRN, che è un rilevatore per qualsiasi stringa che corrisponde all'espressione regolare [0-9]{3}-[0-9]{1}-[0-9]{5}.
• L'espressione regolare (?i)(mrn|medical)(?-i) definisce la hotword. La funzionalità di protezione dei dati sensibili cerca questa hotword nell'intervallo di caratteri definito nel campo proximity.
• Per ogni risultato C_MRN che ha una hotword all'interno dell'insieme proximity, Sensitive Data Protection imposta il livello di probabilità su VERY_LIKELY.

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

using System;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectDataWithHotwordRule
{
    public static InspectContentResponse InspectDataHotwordRule(
        string projectId,
        string text,
        string customRegex,
        string hotwordRegex,
        InfoType infoType = null)
    {
        // Instantiate dlp client.
        var dlp = DlpServiceClient.Create();

        // Construct the content item.
        var contentItem = new ContentItem
        {
            ByteItem = new ByteContentItem
            {
                Type = ByteContentItem.Types.BytesType.TextUtf8,
                Data = Google.Protobuf.ByteString.CopyFromUtf8(text)
            }
        };

        // Construct the info type if null.
        var infotype = infoType ?? new InfoType { Name = "C_MRN" };

        // Construct the custom regex detector.
        var customInfoType = new CustomInfoType
        {
            InfoType = infotype,
            Regex = new Regex { Pattern = customRegex },
            Likelihood = Likelihood.Possible
        };

        // Construct hotword rule.
        var hotwordRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new Regex { Pattern = hotwordRegex },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment
            {
                FixedLikelihood = Likelihood.VeryLikely
            },
            Proximity = new DetectionRule.Types.Proximity
            {
                WindowBefore = 10
            }
        };

        // Construct the rule set for the inspect config.
        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infotype },
            Rules =
            {
                new InspectionRule
                {
                    HotwordRule = hotwordRule
                }
            }
        };

        // Construct the inspect config.
        var inspectConfig = new InspectConfig
        {
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet },
        };

        // Construct the request.
        var request = new InspectContentRequest
        {
            ParentAsLocationName = new LocationName(projectId, "global"),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        // Call the API.
        var response = dlp.InspectContent(request);

        // Inspect the response.
        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("Quote: " + f.Quote);
            Console.WriteLine("Info type: " + f.InfoType.Name);
            Console.WriteLine("Likelihood: " + f.Likelihood);
        }
        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectWithHotWordRules inspects data with hot word rule, it uses custom
// regex with a hot word rule to increase the likelihood match
func inspectWithHotWordRules(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "Patient's MRN 444-5-22222 and just a number 333-2-33333"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Construct the custom regex detectors
	customInfoType := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: "C_MRN",
		},
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: "[1-9]{3}-[1-9]{1}-[1-9]{5}",
			},
		},
		Likelihood: dlppb.Likelihood_POSSIBLE,
	}

	// Construct hotword rule.
	hotWordRule := &dlppb.CustomInfoType_DetectionRule_HotwordRule{
		HotwordRegex: &dlppb.CustomInfoType_Regex{
			Pattern: "(?i)(mrn|medical)(?-i)",
		},
		Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
			WindowBefore: int32(10),
		},
		LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
			Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
				FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
			},
		},
	}

	inspectionRuleSet := &dlppb.InspectionRuleSet{
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_HotwordRule{
					HotwordRule: hotWordRule,
				},
			},
		},
		InfoTypes: []*dlppb.InfoType{
			customInfoType.InfoType,
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfoType,
			},
			RuleSet: []*dlppb.InspectionRuleSet{
				inspectionRuleSet,
			},
			IncludeQuote: true,
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "InfoType Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectWithHotwordRules {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Patient's MRN 444-5-22222 and just a number 333-2-33333";
    String customRegexPattern = "[1-9]{3}-[1-9]{1}-[1-9]{5}";
    String hotwordRegexPattern = "(?i)(mrn|medical)(?-i)";
    inspectWithHotwordRules(projectId, textToInspect, customRegexPattern, hotwordRegexPattern);
  }

  // Inspects a BigQuery Table
  public static void inspectWithHotwordRules(
      String projectId, String textToInspect, String customRegexPattern, String hotwordRegexPattern)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the regex pattern the inspection will look for.
      Regex regex = Regex.newBuilder().setPattern(customRegexPattern).build();

      // Construct the custom regex detector.
      InfoType infoType = InfoType.newBuilder().setName("C_MRN").build();
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder().setInfoType(infoType).setRegex(regex).build();

      // Specify hotword likelihood adjustment.
      LikelihoodAdjustment likelihoodAdjustment =
          LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY).build();

      // Specify a window around a finding to apply a detection rule.
      Proximity proximity = Proximity.newBuilder().setWindowBefore(10).build();

      // Construct hotword rule.
      HotwordRule hotwordRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern(hotwordRegexPattern).build())
              .setLikelihoodAdjustment(likelihoodAdjustment)
              .setProximity(proximity)
              .build();

      // Construct rule set for the inspect config.
      InspectionRuleSet inspectionRuleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(infoType)
              .addRules(InspectionRule.newBuilder().setHotwordRule(hotwordRule))
              .build();

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .setMinLikelihood(Likelihood.POSSIBLE)
              .addRuleSet(inspectionRuleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Patients MRN 444-5-22222';

// The minimum likelihood required before returning a match
// const minLikelihood = DLP.protos.google.privacy.dlp.v2.Likelihood.POSSIBLE;

// The maximum number of findings to report per request (0 = server maximum)
// const maxFindings = 0;

// The infoTypes of information to match
// See https://cloud.google.com/dlp/docs/concepts-infotypes for more information
// about supported infoTypes.
// const infoTypes = [{ name: 'EMAIL_ADDRESS' }];

// The customInfoTypes of information to match
// const customInfoTypes = [{ infoType: { name: 'DICT_TYPE' }, dictionary: { wordList: { words: ['foo', 'bar', 'baz']}}},
//   { infoType: { name: 'REGEX_TYPE' }, regex: {pattern: '\\(\\d{3}\\) \\d{3}-\\d{4}'}}];

// Whether to include the matching string
// const includeQuote = true;

// Custom hotword regex patten
// const hotwordRegexPattern = '(?i)(mrn|medical)(?-i)';

async function inspectWithHotwordRule() {
  // Construct item to inspect
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Construct a hot word rule
  const hotwordRule = {
    hotwordRegex: {
      pattern: hotwordRegexPattern,
    },
    proximity: {
      windowBefore: 10,
    },
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  // Construct a hotword inspection rule
  const inpectionRuleSet = [
    {
      infoTypes: customInfoTypes.map(
        customInfoType => customInfoType.infoType
      ),
      rules: [{hotwordRule: hotwordRule}],
    },
  ];

  // Assigns likelihood to each match
  customInfoTypes = customInfoTypes.map(customInfoType => {
    customInfoType.likelihood =
      DLP.protos.google.privacy.dlp.v2.Likelihood.POSSIBLE;
    return customInfoType;
  });

  // Construct request
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: {
      infoTypes: infoTypes,
      customInfoTypes: customInfoTypes,
      minLikelihood: minLikelihood,
      includeQuote: includeQuote,
      limits: {
        maxFindingsPerRequest: maxFindings,
      },
      ruleSet: inpectionRuleSet,
    },
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log('Findings:');
    findings.forEach(finding => {
      if (includeQuote) {
        console.log(`\tQuote: ${finding.quote}`);
      }
      console.log(`\tInfo type: ${finding.infoType.name}`);
      console.log(`\tLikelihood: ${finding.likelihood}`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectWithHotwordRule();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;

/**
 * Inspect data with a hotword rule
 * This sample uses a custom regex with a hotword rule to increase the likelihood of match.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_hotword_rule(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = "Patient's MRN 444-5-22222 and just a number 333-2-33333"
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the regex pattern the inspection will look for.
    $customRegexPattern = '[1-9]{3}-[1-9]{1}-[1-9]{5}';
    $hotwordRegexPattern = '(?i)(mrn|medical)(?-i)';

    // Construct the custom regex detector.
    $cMrnDetector = (new InfoType())
        ->setName('C_MRN');
    $customInfoType = (new CustomInfoType())
        ->setInfoType($cMrnDetector)
        ->setLikelihood(Likelihood::POSSIBLE)
        ->setRegex((new Regex())
            ->setPattern($customRegexPattern));

    // Specify hotword likelihood adjustment.
    $likelihoodAdjustment = (new LikelihoodAdjustment())
        ->setFixedLikelihood(Likelihood::VERY_LIKELY);

    // Specify a window around a finding to apply a detection rule.
    $proximity = (new Proximity())
        ->setWindowBefore(10);

    $hotwordRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern($hotwordRegexPattern))
        ->setLikelihoodAdjustment($likelihoodAdjustment)
        ->setProximity($proximity);

    // Construct rule set for the inspect config.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$cMrnDetector])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($hotwordRule)
        ]);

    // Construct the configuration for the Inspect request.
    $inspectConfig = (new InspectConfig())
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

import google.cloud.dlp


def inspect_data_w_custom_hotwords(
    project: str,
    content_string: str,
) -> None:
    """Uses the Data Loss Prevention API to analyze string with medical record
       number custom regex detector, with custom hotwords rules to boost finding
       certainty under some circumstances.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector info type called "C_MRN",
    # with ###-#-##### pattern, where each # represents a digit from 1 to 9.
    # The detector has a detection likelihood of POSSIBLE.
    custom_info_types = [
        {
            "info_type": {"name": "C_MRN"},
            "regex": {"pattern": "[1-9]{3}-[1-9]{1}-[1-9]{5}"},
            "likelihood": google.cloud.dlp_v2.Likelihood.POSSIBLE,
        }
    ]

    # Construct a rule set with hotwords "mrn" and "medical", with a likelohood
    # boost to VERY_LIKELY when hotwords are present within the 10 character-
    # window preceding the PII finding.
    hotword_rule = {
        "hotword_regex": {"pattern": "(?i)(mrn|medical)(?-i)"},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
        "proximity": {"window_before": 10},
    }

    rule_set = [
        {"info_types": [{"name": "C_MRN"}], "rules": [{"hotword_rule": hotword_rule}]}
    ]

    # Construct the configuration dictionary with the custom regex info type.
    inspect_config = {
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Per ulteriori informazioni sull'utilizzo dell'API DLP con JSON, consulta la guida introduttiva JSON.

Nota: l'esempio seguente richiede un token di accesso OAuth 2.0.

Metodo HTTP e URL:

POST https://dlp.googleapis.com/v2/projects/PROJECT_ID/content:inspect

Sostituisci PROJECT_ID con l'ID progetto.

Input JSON:

{
  "item":{
    "value":"Patient's MRN 444-5-22222 and just a number 333-2-33333"
  },
  "inspectConfig":{
    "customInfoTypes":[
      {
        "infoType":{
          "name":"C_MRN"
        },
        "regex":{
          "pattern":"[0-9]{3}-[0-9]{1}-[0-9]{5}"
        },
        "likelihood":"POSSIBLE",
      }
    ],
    "ruleSet":[
        {
        "infoTypes": [{"name" : "C_MRN"}],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"(?i)(mrn|medical)(?-i)"
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              },
              "proximity":{
                "windowBefore":10
              }
            }
          }
        ]
      }
    ]
  }
}

Output JSON (abbreviato):

{
  "result": {
    "findings": [
      {
        "infoType": {
          "name": "C_MRN"
        },
        "likelihood": "VERY_LIKELY",
        "location": {
          "byteRange": {
            "start": "14",
            "end": "25"
          },
          "codepointRange": { ... }
        }
      },
      {
        "infoType": {
          "name": "C_MRN"
        },
        "likelihood": "POSSIBLE",
          "byteRange": {
            "start": "44",
            "end": "55"
          },
          "codepointRange": { ... }
        }
      }
    ]
  }
}

L'output mostra che Sensitive Data Protection ha identificato correttamente il numero di cartella clinica utilizzando il rilevatore di infoType personalizzato C_MRN. Inoltre, a causa della corrispondenza del contesto nella regola della hotword, la funzionalità di protezione dei dati sensibili ha assegnato al primo risultato, che aveva un MRN nell'insieme proximity, una probabilità di VERY_LIKELY, come configurato. Il secondo risultato non aveva contesto, quindi likelihood è rimasto a POSSIBLE.

Esempio di hotword: imposta la probabilità di corrispondenza di una colonna della tabella

Questo esempio mostra come impostare la probabilità di corrispondenza di un'intera colonna di dati. Questo approccio è utile, ad esempio, se vuoi escludere una colonna di dati dai risultati dell'ispezione.

Nota: l'approccio consigliato per escludere un'intera colonna di dati dai risultati è utilizzare una regola di esclusione ExcludeByHotword. Per ulteriori informazioni, consulta Omettere i risultati in un'intera colonna di dati.

Considera la tabella seguente. Una colonna contiene numeri di previdenza sociale (SSN) segnaposto e un'altra contiene SSN reali.

Numero di previdenza sociale falso	Numero di previdenza sociale reale
111-11-1111	222-22-2222

Per ridurre al minimo il rumore nei risultati dell'ispezione, puoi escludere eventuali risultati nella colonna Fake Social Security Number. Assegna a questa colonna un livello di probabilità basso. Poi, configura la richiesta in modo che le corrispondenze con questo livello di probabilità siano escluse dai risultati.

In questo esempio, tieni presente quanto segue:

• La regola hotword viene applicata all'infoType US_SOCIAL_SECURITY_NUMBER.
• L'espressione regolare hotword (Fake Social Security Number) contiene il nome della colonna con i valori segnaposto.
• La proprietà windowBefore è impostata su 1, il che significa che la hotword si trova in un'intestazione di colonna e che i risultati devono trovarsi nella colonna.
• Per ogni risultato US_SOCIAL_SECURITY_NUMBER in questa colonna, la funzionalità Protezione dei dati sensibili imposta il livello di probabilità su VERY_UNLIKELY.
• La proprietà minLikelihood è impostata su POSSIBLE, il che significa che qualsiasi risultato con un livello di probabilità inferiore a POSSIBLE viene escluso dai risultati dell'ispezione.

Per ulteriori informazioni sull'utilizzo dell'API DLP con JSON, consulta la guida introduttiva JSON.

Nota: l'esempio seguente richiede un token di accesso OAuth 2.0.

Metodo HTTP e URL:

POST https://dlp.googleapis.com/v2/projects/PROJECT_ID/content:inspect

Sostituisci PROJECT_ID con l'ID progetto.

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using System;
using System.Collections.Generic;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectTableWithCustomHotwords
{
    public static InspectResult InspectTable(
        string projectId,
        Table tableToInspect = null,
        IEnumerable<InfoType> infoTypes = null)
    {
        // Instantiate the dlp client.
        var dlp = DlpServiceClient.Create();

        // Construct the table if null.
        if (tableToInspect == null)
        {
            var row1 = new Value[]
            {
                new Value{ StringValue = "111-11-1111" },
                new Value { StringValue = "222-22-2222" }
            };
            tableToInspect = new Table
            {
                Headers =
                {
                    new FieldId { Name = "Fake Social Security Number" },
                    new FieldId { Name = "Real Social Security Number" }
                },
                Rows =
                {
                    new Table.Types.Row { Values = { row1 } }
                }
            };
        }

        // Specify the table and construct the content item.
        var contentItem = new ContentItem { Table = tableToInspect };

        // Specify the type of info to be inspected.
        var infotypes = infoTypes ?? new InfoType[] { new InfoType { Name = "US_SOCIAL_SECURITY_NUMBER" } };

        // Construct the Inspection Rule Set by specifying the hotword rule as detection rule.
        var ruleSet = new InspectionRuleSet[]
        {
            new InspectionRuleSet
            {
                InfoTypes = { infotypes },
                Rules =
                {
                    new InspectionRule
                    {
                        HotwordRule = new DetectionRule.Types.HotwordRule
                        {
                            HotwordRegex = new Regex
                            {
                                Pattern = "(Fake Social Security Number)"
                            },
                            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment
                            {
                                FixedLikelihood = Likelihood.VeryUnlikely
                            },
                            Proximity = new DetectionRule.Types.Proximity
                            {
                                WindowBefore = 1
                            }
                        }
                    }
                }
            }
        };

        // Construct the request.
        var request = new InspectContentRequest
        {
            InspectConfig = new InspectConfig
            {
                InfoTypes = { infotypes },
                IncludeQuote = true,
                MinLikelihood = Likelihood.Possible,
                RuleSet = { ruleSet }
            },
            ParentAsLocationName = new LocationName(projectId, "global"),
            Item = contentItem
        };

        // Call the API.
        InspectContentResponse response = dlp.InspectContent(request);

        // Inspect the results.
        var resultFindings = response.Result.Findings;

        Console.WriteLine($"Findings: {resultFindings.Count}");

        foreach (var f in resultFindings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response.Result;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectTableWithCustomHotword Sets the match likelihood of a table column to customize data inspection results.
// This example showcases how you can adjust the match likelihood for an entire column of data, enabling the
// exclusion of specific columns from inspection if needed.
func inspectTableWithCustomHotword(w io.Writer, projectID, hotwordRegexPattern string) error {
	// projectID := "your-project-id"
	// hotwordRegexPattern := "(Fake Social Security Number)"

	tableToInspect := &dlppb.Table{
		Headers: []*dlppb.FieldId{
			{Name: "Fake Social Security Number"},
			{Name: "Real Social Security Number"},
		},
		Rows: []*dlppb.Table_Row{
			{
				Values: []*dlppb.Value{
					{
						Type: &dlppb.Value_StringValue{StringValue: "111-11-1111"},
					},
					{
						Type: &dlppb.Value_StringValue{StringValue: "222-22-2222"},
					},
				},
			},
		},
	}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify what content you want the service to de-identify.
	contentItem := &dlppb.ContentItem_Table{
		Table: tableToInspect,
	}

	// Specify the likelihood adjustment to adjust the match likelihood for your detection rule
	// based on your needs and desired level of sensitivity in data analysis.
	likelihoodAdjustment := &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
		Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
			FixedLikelihood: dlppb.Likelihood_VERY_UNLIKELY,
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "US_SOCIAL_SECURITY_NUMBER"},
	}

	// Specify the proximity so that It helps identify sensitive information
	// occurring near other data points, enabling more context-aware analysis.
	proximity := &dlppb.CustomInfoType_DetectionRule_Proximity{
		WindowBefore: 5,
	}

	// Construct hotWord rule.
	hotwordRule := &dlppb.CustomInfoType_DetectionRule_HotwordRule{
		HotwordRegex: &dlppb.CustomInfoType_Regex{
			Pattern: hotwordRegexPattern,
		},
		Proximity:            proximity,
		LikelihoodAdjustment: likelihoodAdjustment,
	}

	// Construct rule set for the inspect config.
	inspectionRuleSet := &dlppb.InspectionRuleSet{
		InfoTypes: infoTypes,
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_HotwordRule{
					HotwordRule: hotwordRule,
				},
			},
		},
	}

	// Construct the configuration for the Inspect request.
	config := &dlppb.InspectConfig{
		IncludeQuote:  true,
		InfoTypes:     infoTypes,
		MinLikelihood: dlppb.Likelihood_POSSIBLE,
		RuleSet: []*dlppb.InspectionRuleSet{
			inspectionRuleSet,
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item: &dlppb.ContentItem{
			DataItem: contentItem,
		},
		InspectConfig: config,
	}
	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.FieldId;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.Table;
import com.google.privacy.dlp.v2.Value;
import java.io.IOException;
import java.util.List;
import java.util.stream.Collectors;
import java.util.stream.Stream;

public class InspectTableWithCustomHotword {

  public static void main(String[] args) throws IOException {
    // TODO(developer): Replace these variables before running the sample.
    // The Google Cloud project id to use as a parent resource.
    String projectId = "your-project-id";
    // Specify the table to be considered for de-identification.
    Table tableToDeIdentify =
        Table.newBuilder()
            .addHeaders(FieldId.newBuilder().setName("Some Social Security Number").build())
            .addHeaders(FieldId.newBuilder().setName("Real Social Security Number").build())
            .addRows(
                Table.Row.newBuilder()
                    .addValues(Value.newBuilder().setStringValue("111-11-1111").build())
                    .addValues(Value.newBuilder().setStringValue("222-22-2222").build())
                    .build())
            .build();
    // Specify the regex pattern to be detected.
    // Refer https://github.com/google/re2/wiki/Syntax for creating regular expression.
    String hotwordRegexPattern = "Some Social Security Number";
    inspectDemotingFindingsWithHotwords(projectId, tableToDeIdentify, hotwordRegexPattern);
  }

  //  Inspects the provided table, excluding the findings of entire column matching regular
  // expression.
  public static void inspectDemotingFindingsWithHotwords(
      String projectId, Table tableToDeIdentify, String hotwordRegexPattern) throws IOException {

    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify what content you want the service to de-identify.
      ContentItem contentItem = ContentItem.newBuilder().setTable(tableToDeIdentify).build();

      CustomInfoType.DetectionRule.LikelihoodAdjustment likelihoodAdjustment =
          CustomInfoType.DetectionRule.LikelihoodAdjustment.newBuilder()
              .setFixedLikelihood(Likelihood.VERY_UNLIKELY)
              .build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types
      List<InfoType> infoTypes =
          Stream.of("US_SOCIAL_SECURITY_NUMBER")
              .map(it -> InfoType.newBuilder().setName(it).build())
              .collect(Collectors.toList());

      CustomInfoType.DetectionRule.Proximity proximity =
          CustomInfoType.DetectionRule.Proximity.newBuilder().setWindowBefore(1).build();

      // Construct hotword rule.
      CustomInfoType.DetectionRule.HotwordRule hotwordRule =
          CustomInfoType.DetectionRule.HotwordRule.newBuilder()
              .setHotwordRegex(
                  CustomInfoType.Regex.newBuilder().setPattern(hotwordRegexPattern).build())
              .setLikelihoodAdjustment(likelihoodAdjustment)
              .setProximity(proximity)
              .build();

      // Construct rule set for the inspect config.
      InspectionRuleSet inspectionRuleSet =
          InspectionRuleSet.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addRules(InspectionRule.newBuilder().setHotwordRule(hotwordRule))
              .build();

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder()
              .setIncludeQuote(true)
              .setMinLikelihood(Likelihood.POSSIBLE)
              .addRuleSet(inspectionRuleSet)
              .addAllInfoTypes(infoTypes)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(contentItem)
              .setInspectConfig(config)
              .build();

      InspectContentResponse response = dlp.inspectContent(request);
      // Parse the response and process results.
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under.
// const projectId = "your-project-id";

// Table to inspect
const tableToInspect = {
  headers: [
    {name: 'Fake Social Security Number'},
    {name: 'Real Social Security Number'},
  ],
  rows: [
    {
      values: [{stringValue: '111-11-1111'}, {stringValue: '222-22-2222'}],
    },
  ],
};

async function inspectWithCustomHotwords() {
  // Specify the regex pattern to be detected.
  const hotwordRegexPattern = '(Fake Social Security Number)';

  // Specify what content you want the service to de-identify.
  const contentItem = {
    table: tableToInspect,
  };

  // Specify the type of info the inspection will look for.
  const infoTypes = [{name: 'US_SOCIAL_SECURITY_NUMBER'}];

  // Construct hotword rule.
  const hotwordRule = {
    hotwordRegex: {
      pattern: hotwordRegexPattern,
    },
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_UNLIKELY,
    },
    proximity: {
      windowBefore: 1,
    },
  };

  // Construct rule set for the inspect configuration.
  const inspectionRuleSet = {
    infoTypes: infoTypes,
    rules: [
      {
        hotwordRule: hotwordRule,
      },
    ],
  };

  // Construct the configuration for the Inspect request.
  const config = {
    infoTypes: infoTypes,
    ruleSet: [inspectionRuleSet],
    minLikelihood: DLP.protos.google.privacy.dlp.v2.Likelihood.POSSIBLE,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    item: contentItem,
    inspectConfig: config,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print Findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectWithCustomHotwords();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\FieldId;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\Table;
use Google\Cloud\Dlp\V2\Table\Row;
use Google\Cloud\Dlp\V2\Value;

/**
 * Hotword example: Set the match likelihood of a table column.
 * This example demonstrates how you can set the match likelihood of an entire column of data.
 * This approach is helpful, for example, if you want to exclude a column of data from inspection
 * results.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 */
function inspect_column_values_w_custom_hotwords(string $projectId): void
{
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify the table to be inspected.
    $tableToDeIdentify = (new Table())
        ->setHeaders([
            (new FieldId())
                ->setName('Fake Social Security Number'),
            (new FieldId())
                ->setName('Real Social Security Number'),
        ])
        ->setRows([
            (new Row())->setValues([
                (new Value())
                    ->setStringValue('111-11-1111'),
                (new Value())
                    ->setStringValue('222-22-2222')
            ])
        ]);

    $item = (new ContentItem())
        ->setTable($tableToDeIdentify);

    // Specify the regex pattern the inspection will look for.
    $hotwordRegexPattern = 'Fake Social Security Number';

    // Specify hotword likelihood adjustment.
    $likelihoodAdjustment = (new LikelihoodAdjustment())
        ->setFixedLikelihood(Likelihood::VERY_UNLIKELY);

    // Specify a window around a finding to apply a detection rule.
    $proximity = (new Proximity())
        ->setWindowBefore(1);

    // Construct the hotword rule.
    $hotwordRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern($hotwordRegexPattern))
        ->setLikelihoodAdjustment($likelihoodAdjustment)
        ->setProximity($proximity);

    // Construct rule set for the inspect config.
    $infotype = (new InfoType())
        ->setName('US_SOCIAL_SECURITY_NUMBER');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$infotype])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($hotwordRule)
        ]);

    // Construct the configuration for the Inspect request.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$infotype])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet])
        ->setMinLikelihood(Likelihood::POSSIBLE);

    // Run request.
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results.
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per autenticarti a Sensitive Data Protection, configura le Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

from typing import List

import google.cloud.dlp


def inspect_column_values_w_custom_hotwords(
    project: str,
    table_header: List[str],
    table_rows: List[List[str]],
    info_types: List[str],
    custom_hotword: str,
) -> None:
    """Uses the Data Loss Prevention API to inspect table data using built-in
    infoType detectors, excluding columns that match a custom hot-word.
    Args:
        project: The Google Cloud project id to use as a parent resource.
        table_header: List of strings representing table field names.
        table_rows: List of rows representing table values.
        info_types: The infoType for which hot-word rule is applied.
        custom_hotword: The custom regular expression used for likelihood boosting.
    """

    # Instantiate a client
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct the `table`. For more details on the table schema, please see
    # https://cloud.google.com/dlp/docs/reference/rest/v2/ContentItem#Table
    headers = [{"name": val} for val in table_header]
    rows = []
    for row in table_rows:
        rows.append({"values": [{"string_value": cell_val} for cell_val in row]})
    table = {"headers": headers, "rows": rows}

    # Construct the `item` for table to be inspected.
    item = {"table": table}

    # Prepare info_types by converting the list of strings into a list of
    # dictionaries.
    info_types = [{"name": info_type} for info_type in info_types]

    # Construct a rule set with caller provided hot-word, with a likelihood
    # boost to VERY_UNLIKELY when the hot-word are present
    hotword_rule = {
        "hotword_regex": {"pattern": custom_hotword},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_UNLIKELY
        },
        "proximity": {"window_before": 1},
    }

    rule_set = [
        {
            "info_types": info_types,
            "rules": [{"hotword_rule": hotword_rule}],
        }
    ]

    # Construct the configuration dictionary, which defines the entire inspect content task.
    inspect_config = {
        "info_types": info_types,
        "rule_set": rule_set,
        "min_likelihood": google.cloud.dlp_v2.Likelihood.POSSIBLE,
        "include_quote": True,
    }

    # Convert the project id into a full resource id.
    parent = f"projects/{project}/locations/global"

    # Call the API
    response = dlp.inspect_content(
        request={
            "parent": parent,
            "inspect_config": inspect_config,
            "item": item,
        }
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            try:
                if finding.quote:
                    print(f"Quote: {finding.quote}")
            except AttributeError:
                pass
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Input JSON:

{
  "item": {
    "table": {
      "headers": [
        {
          "name": "Fake Social Security Number"
        },
        {
          "name": "Real Social Security Number"
        }
      ],
      "rows": [
        {
          "values": [
            {
              "stringValue": "111-11-1111"
            },
            {
              "stringValue": "222-22-2222"
            }
          ]
        }
      ]
    }
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "includeQuote": true,
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "hotwordRule": {
              "hotwordRegex": {
                "pattern": "(Fake Social Security Number)"
              },
              "likelihoodAdjustment": {
                "fixedLikelihood": "VERY_UNLIKELY"
              },
              "proximity": {
                "windowBefore": 1
              }
            }
          }
        ]
      }
    ],
    "minLikelihood": "POSSIBLE"
  }
}

Output JSON:

{
  "result": {
    "findings": [
      {
        "quote": "222-22-2222",
        "infoType": {
          "name": "US_SOCIAL_SECURITY_NUMBER"
        },
        "likelihood": "VERY_LIKELY",
        "location": {
          "byteRange": {
            "end": "11"
          },
          "codepointRange": {
            "end": "11"
          },
          "contentLocations": [
            {
              "recordLocation": {
                "fieldId": {
                  "name": "Real Social Security Number"
                },
                "tableLocation": {}
              }
            }
          ]
        },
        "createTime": "TIMESTAMP",
        "findingId": "TIMESTAMP"
      }
    ]
  }
}

Il valore 111-11-1111, che si trova nella colonna Fake Social Security Number, corrispondeva alla regola hotword, pertanto la funzionalità Protezione dei dati sensibili gli ha assegnato il livello di probabilità VERY_UNLIKELY . Questo livello è inferiore alla probabilità minima impostata nella configurazione dell'ispezione (POSSIBLE), pertanto questo risultato viene escluso dal risultato dell'ispezione.

Puoi fare esperimenti con questo esempio rimuovendo l'insieme di regole. Tieni presente che Sensitive Data Protection include 111-11-1111 nei risultati.