Halaman ini diterjemahkan oleh Cloud Translation API.

Menerima pesan dari langganan pull

Dokumen ini menjelaskan cara menerima pesan dari langganan pull. Anda dapat menggunakan konsol Google Cloud , Google Cloud CLI, library klien, atau Pub/Sub API untuk membuat langganan pull.

Sebelum memulai

Buat langganan pull.

Peran dan izin yang diperlukan

Untuk mendapatkan izin yang diperlukan untuk menarik pesan dari langganan dan mengelolanya, minta administrator Anda untuk memberi Anda peran IAM Pub/Sub Subscriber (roles/pubsub.subscriber) di project. Untuk mengetahui informasi selengkapnya tentang cara memberikan peran, lihat Mengelola akses ke project, folder, dan organisasi.

Peran bawaan ini berisi izin yang diperlukan untuk menarik pesan dari langganan dan mengelolanya. Untuk melihat izin yang benar-benar diperlukan, luaskan bagian Izin yang diperlukan:

Izin yang diperlukan

Izin berikut diperlukan untuk menarik pesan dari langganan dan mengelolanya:

Menarik dari langganan: pubsub.subscriptions.consume
Buat langganan: pubsub.subscriptions.create
Menghapus langganan: pubsub.subscriptions.delete
Mendapatkan langganan: pubsub.subscriptions.get
Mencantumkan langganan: pubsub.subscriptions.list
Memperbarui langganan: pubsub.subscriptions.update
Melampirkan langganan ke topik: pubsub.topics.attachSubscription
Dapatkan kebijakan IAM untuk langganan: pubsub.subscriptions.getIamPolicy
Konfigurasi kebijakan IAM untuk langganan: pubsub.subscriptions.setIamPolicy
Berikan izin untuk menggunakan pesan dari langganan pada langganan pull: pubsub.subscriptions.consume

Anda mungkin juga bisa mendapatkan izin ini dengan peran khusus atau peran bawaan lainnya.

Mengambil pesan dari langganan

Contoh berikut menunjukkan cara menarik pesan dari langganan menggunakan StreamingPull API atau Pull API.

StreamingPull API

Untuk menggunakan StreamingPull API, Anda harus menggunakan library klien.

Konsol Google Cloud dan Google Cloud CLI tidak mendukung StreamingPull API.

StreamingPull dan contoh kode library klien tingkat tinggi

C++

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan C++ di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub C++ API.

namespace pubsub = ::google::cloud::pubsub;
auto sample = [](pubsub::Subscriber subscriber) {
  return subscriber.Subscribe(
      [&](pubsub::Message const& m, pubsub::AckHandler h) {
        std::cout << "Received message " << m << "\n";
        std::move(h).ack();
        PleaseIgnoreThisSimplifiesTestingTheSamples();
      });
};

C#

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan C# di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API C# Pub/Sub.


using Google.Cloud.PubSub.V1;
using System;
using System.Threading;
using System.Threading.Tasks;

public class PullMessagesAsyncSample
{
    public async Task<int> PullMessagesAsync(string projectId, string subscriptionId, bool acknowledge)
    {
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);
        SubscriberClient subscriber = await SubscriberClient.CreateAsync(subscriptionName);
        // SubscriberClient runs your message handle function on multiple
        // threads to maximize throughput.
        int messageCount = 0;
        Task startTask = subscriber.StartAsync((PubsubMessage message, CancellationToken cancel) =>
        {
            string text = message.Data.ToStringUtf8();
            Console.WriteLine($"Message {message.MessageId}: {text}");
            Interlocked.Increment(ref messageCount);
            return Task.FromResult(acknowledge ? SubscriberClient.Reply.Ack : SubscriberClient.Reply.Nack);
        });
        // Run for 5 seconds.
        await Task.Delay(5000);
        await subscriber.StopAsync(CancellationToken.None);
        // Lets make sure that the start task finished successfully after the call to stop.
        await startTask;
        return messageCount;
    }
}

Go

Contoh berikut menggunakan library klien Go Pub/Sub versi utama (v2). Jika Anda masih menggunakan library v1, lihat panduan migrasi ke v2. Untuk melihat daftar contoh kode v1, lihat contoh kode yang tidak digunakan lagi.

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Go API.

import (
	"context"
	"fmt"
	"io"
	"sync/atomic"
	"time"

	"cloud.google.com/go/pubsub/v2"
)

func pullMsgs(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	// client.Subscriber can be passed a subscription ID (e.g. "my-sub") or
	// a fully qualified name (e.g. "projects/my-project/subscriptions/my-sub").
	// If a subscription ID is provided, the project ID from the client is used.
	sub := client.Subscriber(subID)

	// Receive messages for 10 seconds, which simplifies testing.
	// Comment this out in production, since `Receive` should
	// be used as a long running operation.
	ctx, cancel := context.WithTimeout(ctx, 10*time.Second)
	defer cancel()

	var received int32
	err = sub.Receive(ctx, func(_ context.Context, msg *pubsub.Message) {
		fmt.Fprintf(w, "Got message: %q\n", string(msg.Data))
		atomic.AddInt32(&received, 1)
		msg.Ack()
	})
	if err != nil {
		return fmt.Errorf("sub.Receive: %w", err)
	}
	fmt.Fprintf(w, "Received %d messages\n", received)

	return nil
}

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Java API.


import com.google.cloud.pubsub.v1.AckReplyConsumer;
import com.google.cloud.pubsub.v1.MessageReceiver;
import com.google.cloud.pubsub.v1.Subscriber;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PubsubMessage;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class SubscribeAsyncExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";

    subscribeAsyncExample(projectId, subscriptionId);
  }

  public static void subscribeAsyncExample(String projectId, String subscriptionId) {
    ProjectSubscriptionName subscriptionName =
        ProjectSubscriptionName.of(projectId, subscriptionId);

    // Instantiate an asynchronous message receiver.
    MessageReceiver receiver =
        (PubsubMessage message, AckReplyConsumer consumer) -> {
          // Handle incoming message, then ack the received message.
          System.out.println("Id: " + message.getMessageId());
          System.out.println("Data: " + message.getData().toStringUtf8());
          consumer.ack();
        };

    Subscriber subscriber = null;
    try {
      subscriber = Subscriber.newBuilder(subscriptionName, receiver).build();
      // Start the subscriber.
      subscriber.startAsync().awaitRunning();
      System.out.printf("Listening for messages on %s:\n", subscriptionName.toString());
      // Allow the subscriber to run for 30s unless an unrecoverable error occurs.
      subscriber.awaitTerminated(30, TimeUnit.SECONDS);
    } catch (TimeoutException timeoutException) {
      // Shut down the subscriber after 30s. Stop receiving messages.
      subscriber.stopAsync();
    }
  }
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Node.js Pub/Sub.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 60;

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

function listenForMessages(subscriptionNameOrId, timeout) {
  // References an existing subscription; if you are unsure if the
  // subscription will exist, try the optimisticSubscribe sample.
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  let messageCount = 0;
  const messageHandler = message => {
    console.log(`Received message ${message.id}:`);
    console.log(`\tData: ${message.data}`);
    console.log(`\tAttributes: ${message.attributes}`);
    messageCount += 1;

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Listen for new messages until timeout is hit
  subscription.on('message', messageHandler);

  // Wait a while for the subscription to run. (Part of the sample only.)
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
    console.log(`${messageCount} message(s) received.`);
  }, timeout * 1000);
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Node.js Pub/Sub.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 60;

// Imports the Google Cloud client library
import {PubSub, Message} from '@google-cloud/pubsub';

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

function listenForMessages(subscriptionNameOrId: string, timeout: number) {
  // References an existing subscription; if you are unsure if the
  // subscription will exist, try the optimisticSubscribe sample.
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  let messageCount = 0;
  const messageHandler = (message: Message) => {
    console.log(`Received message ${message.id}:`);
    console.log(`\tData: ${message.data}`);
    console.log(`\tAttributes: ${message.attributes}`);
    messageCount += 1;

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Listen for new messages until timeout is hit
  subscription.on('message', messageHandler);

  // Wait a while for the subscription to run. (Part of the sample only.)
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
    console.log(`${messageCount} message(s) received.`);
  }, timeout * 1000);
}

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Python API.

from concurrent.futures import TimeoutError
from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"
# Number of seconds the subscriber should listen for messages
# timeout = 5.0

subscriber = pubsub_v1.SubscriberClient()
# The `subscription_path` method creates a fully qualified identifier
# in the form `projects/{project_id}/subscriptions/{subscription_id}`
subscription_path = subscriber.subscription_path(project_id, subscription_id)

def callback(message: pubsub_v1.subscriber.message.Message) -> None:
    print(f"Received {message}.")
    message.ack()

streaming_pull_future = subscriber.subscribe(subscription_path, callback=callback)
print(f"Listening for messages on {subscription_path}..\n")

# Wrap subscriber in a 'with' block to automatically call close() when done.
with subscriber:
    try:
        # When `timeout` is not set, result() will block indefinitely,
        # unless an exception is encountered first.
        streaming_pull_future.result(timeout=timeout)
    except TimeoutError:
        streaming_pull_future.cancel()  # Trigger the shutdown.
        streaming_pull_future.result()  # Block until the shutdown is complete.

Ruby

Contoh berikut menggunakan library klien Pub/Sub Ruby v3. Jika Anda masih menggunakan library v2, lihat panduan migrasi ke v3. Untuk melihat daftar contoh kode Ruby v2, lihat contoh kode yang tidak digunakan lagi.

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Ruby di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Ruby Pub/Sub.

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

listener = subscriber.listen do |received_message|
  puts "Received message: #{received_message.data}"
  received_message.acknowledge!
end

listener.start
# Let the main thread sleep for 60 seconds so the thread for listening
# messages does not quit
sleep 60
listener.stop.wait!

Mengambil atribut kustom menggunakan library klien tingkat tinggi

Contoh berikut menunjukkan cara menarik pesan secara asinkron dan mengambil atribut kustom dari metadata.

C++

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan C++ di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub C++ API.

namespace pubsub = ::google::cloud::pubsub;
auto sample = [](pubsub::Subscriber subscriber) {
  return subscriber.Subscribe(
      [&](pubsub::Message const& m, pubsub::AckHandler h) {
        std::cout << "Received message with attributes:\n";
        for (auto& kv : m.attributes()) {
          std::cout << "  " << kv.first << ": " << kv.second << "\n";
        }
        std::move(h).ack();
        PleaseIgnoreThisSimplifiesTestingTheSamples();
      });
};

C#

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan C# di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API C# Pub/Sub.


using Google.Cloud.PubSub.V1;
using System;
using System.Collections.Generic;
using System.Threading;
using System.Threading.Tasks;

public class PullMessagesWithCustomAttributesAsyncSample
{
    public async Task<List<PubsubMessage>> PullMessagesWithCustomAttributesAsync(string projectId, string subscriptionId, bool acknowledge)
    {
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);

        SubscriberClient subscriber = await SubscriberClient.CreateAsync(subscriptionName);
        var messages = new List<PubsubMessage>();
        Task startTask = subscriber.StartAsync((PubsubMessage message, CancellationToken cancel) =>
        {
            messages.Add(message);
            string text = message.Data.ToStringUtf8();
            Console.WriteLine($"Message {message.MessageId}: {text}");
            if (message.Attributes != null)
            {
                foreach (var attribute in message.Attributes)
                {
                    Console.WriteLine($"{attribute.Key} = {attribute.Value}");
                }
            }
            return Task.FromResult(acknowledge ? SubscriberClient.Reply.Ack : SubscriberClient.Reply.Nack);
        });
        // Run for 7 seconds.
        await Task.Delay(7000);
        await subscriber.StopAsync(CancellationToken.None);
        // Lets make sure that the start task finished successfully after the call to stop.
        await startTask;
        return messages;
    }
}

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Go API.

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/pubsub/v2"
)

func pullMsgsCustomAttributes(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	// client.Subscriber can be passed a subscription ID (e.g. "my-sub") or
	// a fully qualified name (e.g. "projects/my-project/subscriptions/my-sub").
	// If a subscription ID is provided, the project ID from the client is used.
	sub := client.Subscriber(subID)

	// Receive messages for 10 seconds, which simplifies testing.
	// Comment this out in production, since `Receive` should
	// be used as a long running operation.
	ctx, cancel := context.WithTimeout(ctx, 10*time.Second)
	defer cancel()

	// Receive blocks until the context is cancelled or an error occurs.
	err = sub.Receive(ctx, func(_ context.Context, msg *pubsub.Message) {
		fmt.Fprintf(w, "Got message :%q\n", string(msg.Data))
		fmt.Fprintln(w, "Attributes:")
		for key, value := range msg.Attributes {
			fmt.Fprintf(w, "%s = %s\n", key, value)
		}
		msg.Ack()
	})
	if err != nil {
		return fmt.Errorf("sub.Receive: %w", err)
	}

	return nil
}

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Java API.


import com.google.cloud.pubsub.v1.AckReplyConsumer;
import com.google.cloud.pubsub.v1.MessageReceiver;
import com.google.cloud.pubsub.v1.Subscriber;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PubsubMessage;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class SubscribeWithCustomAttributesExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";

    subscribeWithCustomAttributesExample(projectId, subscriptionId);
  }

  public static void subscribeWithCustomAttributesExample(String projectId, String subscriptionId) {
    ProjectSubscriptionName subscriptionName =
        ProjectSubscriptionName.of(projectId, subscriptionId);

    // Instantiate an asynchronous message receiver.
    MessageReceiver receiver =
        (PubsubMessage message, AckReplyConsumer consumer) -> {
          // Handle incoming message, then ack the received message.
          System.out.println("Id: " + message.getMessageId());
          System.out.println("Data: " + message.getData().toStringUtf8());
          // Print message attributes.
          message
              .getAttributesMap()
              .forEach((key, value) -> System.out.println(key + " = " + value));
          consumer.ack();
        };

    Subscriber subscriber = null;
    try {
      subscriber = Subscriber.newBuilder(subscriptionName, receiver).build();
      // Start the subscriber.
      subscriber.startAsync().awaitRunning();
      System.out.printf("Listening for messages on %s:\n", subscriptionName.toString());
      // Allow the subscriber to run for 30s unless an unrecoverable error occurs.
      subscriber.awaitTerminated(30, TimeUnit.SECONDS);
    } catch (TimeoutException timeoutException) {
      // Shut down the subscriber after 30s. Stop receiving messages.
      subscriber.stopAsync();
    }
  }
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Node.js Pub/Sub.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 60;

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

async function listenWithCustomAttributes(subscriptionNameOrId, timeout) {
  // References an existing subscription, e.g. "my-subscription"
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  const messageHandler = message => {
    console.log(
      `Received message: id ${message.id}, data ${
        message.data
      }, attributes: ${JSON.stringify(message.attributes)}`,
    );

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Wait a while for the subscription to run. (Part of the sample only.)
  subscription.on('message', messageHandler);
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
  }, timeout * 1000);
}

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Python API.

from concurrent.futures import TimeoutError
from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"
# Number of seconds the subscriber should listen for messages
# timeout = 5.0

subscriber = pubsub_v1.SubscriberClient()
subscription_path = subscriber.subscription_path(project_id, subscription_id)

def callback(message: pubsub_v1.subscriber.message.Message) -> None:
    print(f"Received {message.data!r}.")
    if message.attributes:
        print("Attributes:")
        for key in message.attributes:
            value = message.attributes.get(key)
            print(f"{key}: {value}")
    message.ack()

streaming_pull_future = subscriber.subscribe(subscription_path, callback=callback)
print(f"Listening for messages on {subscription_path}..\n")

# Wrap subscriber in a 'with' block to automatically call close() when done.
with subscriber:
    try:
        # When `timeout` is not set, result() will block indefinitely,
        # unless an exception is encountered first.
        streaming_pull_future.result(timeout=timeout)
    except TimeoutError:
        streaming_pull_future.cancel()  # Trigger the shutdown.
        streaming_pull_future.result()  # Block until the shutdown is complete.

Ruby

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Ruby di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Ruby Pub/Sub.

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

listener = subscriber.listen do |received_message|
  puts "Received message: #{received_message.data}"
  unless received_message.attributes.empty?
    puts "Attributes:"
    received_message.attributes.each do |key, value|
      puts "#{key}: #{value}"
    end
  end
  received_message.acknowledge!
end

listener.start
# Let the main thread sleep for 60 seconds so the thread for listening
# messages does not quit
sleep 60
listener.stop.wait!

Menangani error menggunakan library klien tingkat tinggi

Contoh berikut menunjukkan cara menangani error yang muncul saat berlangganan pesan.

C++

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan C++ di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub C++ API.

namespace pubsub = ::google::cloud::pubsub;
using ::google::cloud::future;
auto sample = [](pubsub::Subscriber subscriber) {
  return subscriber
      .Subscribe([&](pubsub::Message const& m, pubsub::AckHandler h) {
        std::cout << "Received message " << m << "\n";
        std::move(h).ack();
        PleaseIgnoreThisSimplifiesTestingTheSamples();
      })
      // Setup an error handler for the subscription session
      .then([](future<google::cloud::Status> f) {
        std::cout << "Subscription session result: " << f.get() << "\n";
      });
};

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Go API.

import (
	"context"
	"fmt"
	"io"

	"cloud.google.com/go/pubsub/v2"
)

func pullMsgsError(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	// If the service returns a non-retryable error, Receive returns that error after
	// all of the outstanding calls to the handler have returned.
	// client.Subscriber can be passed a subscription ID (e.g. "my-sub") or
	// a fully qualified name (e.g. "projects/my-project/subscriptions/my-sub").
	// If a subscription ID is provided, the project ID from the client is used.
	sub := client.Subscriber(subID)
	err = sub.Receive(ctx, func(ctx context.Context, msg *pubsub.Message) {
		fmt.Fprintf(w, "Got message: %q\n", string(msg.Data))
		msg.Ack()
	})
	if err != nil {
		return fmt.Errorf("Receive: %w", err)
	}
	return nil
}

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Java API.


import com.google.api.gax.core.ExecutorProvider;
import com.google.api.gax.core.InstantiatingExecutorProvider;
import com.google.cloud.pubsub.v1.AckReplyConsumer;
import com.google.cloud.pubsub.v1.MessageReceiver;
import com.google.cloud.pubsub.v1.Subscriber;
import com.google.common.util.concurrent.MoreExecutors;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PubsubMessage;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class SubscribeWithErrorListenerExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";

    subscribeWithErrorListenerExample(projectId, subscriptionId);
  }

  public static void subscribeWithErrorListenerExample(String projectId, String subscriptionId) {
    ProjectSubscriptionName subscriptionName =
        ProjectSubscriptionName.of(projectId, subscriptionId);

    // Instantiate an asynchronous message receiver.
    MessageReceiver receiver =
        (PubsubMessage message, AckReplyConsumer consumer) -> {
          // Handle incoming message, then ack the received message.
          System.out.println("Id: " + message.getMessageId());
          System.out.println("Data: " + message.getData().toStringUtf8());
          consumer.ack();
        };

    Subscriber subscriber = null;
    try {
      // Provides an executor service for processing messages.
      ExecutorProvider executorProvider =
          InstantiatingExecutorProvider.newBuilder().setExecutorThreadCount(4).build();

      subscriber =
          Subscriber.newBuilder(subscriptionName, receiver)
              .setExecutorProvider(executorProvider)
              .build();

      // Listen for unrecoverable failures.
      subscriber.addListener(
          new Subscriber.Listener() {
            public void failed(Subscriber.State from, Throwable failure) {
              System.out.println("Unrecoverable subscriber failure:" + failure.getStackTrace());
            }
          },
          MoreExecutors.directExecutor());

      // Start the subscriber.
      subscriber.startAsync().awaitRunning();
      System.out.printf("Listening for messages on %s:\n", subscriptionName.toString());
      // Allow the subscriber to run for 30s unless an unrecoverable error occurs.
      subscriber.awaitTerminated(30, TimeUnit.SECONDS);
    } catch (TimeoutException timeoutException) {
      // Shut down the subscriber after 30s. Stop receiving messages.
      subscriber.stopAsync();
    }
  }
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Node.js Pub/Sub.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 10;

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

function listenForErrors(subscriptionNameOrId, timeout) {
  // References an existing subscription
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  const messageHandler = message => {
    // Do something with the message
    console.log(`Message: ${message}`);

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Create an event handler to handle errors
  const errorHandler = error => {
    // Do something with the error
    console.error(`ERROR: ${error}`);
    throw error;
  };

  // Listen for new messages/errors until timeout is hit
  subscription.on('message', messageHandler);
  subscription.on('error', errorHandler);

  // Wait a while for the subscription to run. (Part of the sample only.)
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
    subscription.removeListener('error', errorHandler);
  }, timeout * 1000);
}

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Python API.

from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"
# Number of seconds the subscriber should listen for messages
# timeout = 5.0

subscriber = pubsub_v1.SubscriberClient()
subscription_path = subscriber.subscription_path(project_id, subscription_id)

def callback(message: pubsub_v1.subscriber.message.Message) -> None:
    print(f"Received {message}.")
    message.ack()

streaming_pull_future = subscriber.subscribe(subscription_path, callback=callback)
print(f"Listening for messages on {subscription_path}..\n")

# Wrap subscriber in a 'with' block to automatically call close() when done.
with subscriber:
    # When `timeout` is not set, result() will block indefinitely,
    # unless an exception is encountered first.
    try:
        streaming_pull_future.result(timeout=timeout)
    except Exception as e:
        print(
            f"Listening for messages on {subscription_path} threw an exception: {e}."
        )
        streaming_pull_future.cancel()  # Trigger the shutdown.
        streaming_pull_future.result()  # Block until the shutdown is complete.

Ruby

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Go API.

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

listener = subscriber.listen do |received_message|
  puts "Received message: #{received_message.data}"
  received_message.acknowledge!
end

# Propagate exception from child threads to the main thread as soon as it is
# raised. Exceptions happened in the callback thread are collected in the
# callback thread pool and do not propagate to the main thread
Thread.abort_on_exception = true

begin
  listener.start
  # Let the main thread sleep for 60 seconds so the thread for listening
  # messages does not quit
  sleep 60
  listener.stop.wait!
rescue StandardError => e
  puts "Exception #{e.inspect}: #{e.message}"
  raise "Stopped listening for messages."
end

Tarik unary

Untuk menggunakan Unary API, Anda dapat menggunakan Google Cloud konsol, Google Cloud CLI, atau library klien.

Pertimbangan

Pub/Sub mengirimkan daftar pesan. Jika daftar memiliki beberapa pesan, Pub/Sub akan mengurutkan pesan dengan kunci pengurutan yang sama. Berikut adalah beberapa peringatan penting:

Menetapkan nilai untuk max_messages dalam permintaan tidak menjamin bahwa max_messages akan ditampilkan, meskipun ada banyak pesan dalam backlog. Pub/Sub Pull API mungkin menampilkan kurang dari max_messages untuk mengurangi latensi pengiriman pesan yang siap dikirim.
Respons pull yang berisi 0 pesan tidak boleh digunakan sebagai indikator bahwa tidak ada pesan dalam backlog. Respons dapat diperoleh dengan 0 pesan dan memiliki permintaan berikutnya yang menampilkan pesan.

Konsol

Di konsol Google Cloud , buka halaman Pub/Sub subscriptions.

Buka Langganan
Klik nama langganan yang ingin Anda tarik.
Di tab Pesan, klik Tarik.

Anda akan melihat pesan yang Anda publikasikan ke langganan ini dan waktu pesan tersebut dipublikasikan.

Saat menggunakan konsol Google Cloud , penarikan individual untuk volume pesan yang rendah sering kali menampilkan nol pesan. Jika Anda tidak melihat pesan, klik Tarik beberapa kali untuk mengirimkan beberapa permintaan penarikan. Ini bukan masalah pada Library Klien Pub/Sub.

gcloud

Untuk menarik pesan dari langganan, jalankan perintah gcloud pubsub subscriptions pull. gcloud CLI mencetak pesan ke command line.

gcloud pubsub subscriptions pull SUBSCRIPTION_NAME --auto-ack

Ganti:

SUBSCRIPTION_NAME: Nama langganan yang ingin Anda tarik pesannya.

Library Klien

Berikut beberapa contoh kode untuk menarik dan mengonfirmasi sejumlah tetap pesan.

C++

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan C++ di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub C++ API.

[](google::cloud::pubsub::Subscriber subscriber) {
  auto response = subscriber.Pull();
  if (!response) throw std::move(response).status();
  std::cout << "Received message " << response->message << "\n";
  std::move(response->handler).ack();
}

C#

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan C# di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API C# Pub/Sub.


using Google.Cloud.PubSub.V1;
using Grpc.Core;
using System;
using System.Linq;
using System.Threading;

public class PullMessagesSyncSample
{
    public int PullMessagesSync(string projectId, string subscriptionId, bool acknowledge)
    {
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);
        SubscriberServiceApiClient subscriberClient = SubscriberServiceApiClient.Create();
        int messageCount = 0;
        try
        {
            // Pull messages from server,
            // allowing an immediate response if there are no messages.
            PullResponse response = subscriberClient.Pull(subscriptionName, maxMessages: 20);
            // Print out each received message.
            foreach (ReceivedMessage msg in response.ReceivedMessages)
            {
                string text = msg.Message.Data.ToStringUtf8();
                Console.WriteLine($"Message {msg.Message.MessageId}: {text}");
                Interlocked.Increment(ref messageCount);
            }
            // If acknowledgement required, send to server.
            if (acknowledge && messageCount > 0)
            {
                subscriberClient.Acknowledge(subscriptionName, response.ReceivedMessages.Select(msg => msg.AckId));
            }
        }
        catch (RpcException ex) when (ex.Status.StatusCode == StatusCode.Unavailable)
        {
            // UNAVAILABLE due to too many concurrent pull requests pending for the given subscription.
        }
        return messageCount;
    }
}

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Java API.


import com.google.cloud.pubsub.v1.stub.GrpcSubscriberStub;
import com.google.cloud.pubsub.v1.stub.SubscriberStub;
import com.google.cloud.pubsub.v1.stub.SubscriberStubSettings;
import com.google.pubsub.v1.AcknowledgeRequest;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PullRequest;
import com.google.pubsub.v1.PullResponse;
import com.google.pubsub.v1.ReceivedMessage;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class SubscribeSyncExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";
    Integer numOfMessages = 10;

    subscribeSyncExample(projectId, subscriptionId, numOfMessages);
  }

  public static void subscribeSyncExample(
      String projectId, String subscriptionId, Integer numOfMessages) throws IOException {
    SubscriberStubSettings subscriberStubSettings =
        SubscriberStubSettings.newBuilder()
            .setTransportChannelProvider(
                SubscriberStubSettings.defaultGrpcTransportProviderBuilder()
                    .setMaxInboundMessageSize(20 * 1024 * 1024) // 20MB (maximum message size).
                    .build())
            .build();

    try (SubscriberStub subscriber = GrpcSubscriberStub.create(subscriberStubSettings)) {
      String subscriptionName = ProjectSubscriptionName.format(projectId, subscriptionId);
      PullRequest pullRequest =
          PullRequest.newBuilder()
              .setMaxMessages(numOfMessages)
              .setSubscription(subscriptionName)
              .build();

      // Use pullCallable().futureCall to asynchronously perform this operation.
      PullResponse pullResponse = subscriber.pullCallable().call(pullRequest);

      // Stop the program if the pull response is empty to avoid acknowledging
      // an empty list of ack IDs.
      if (pullResponse.getReceivedMessagesList().isEmpty()) {
        System.out.println("No message was pulled. Exiting.");
        return;
      }

      List<String> ackIds = new ArrayList<>();
      for (ReceivedMessage message : pullResponse.getReceivedMessagesList()) {
        // Handle received message
        // ...
        ackIds.add(message.getAckId());
      }

      // Acknowledge received messages.
      AcknowledgeRequest acknowledgeRequest =
          AcknowledgeRequest.newBuilder()
              .setSubscription(subscriptionName)
              .addAllAckIds(ackIds)
              .build();

      // Use acknowledgeCallable().futureCall to asynchronously perform this operation.
      subscriber.acknowledgeCallable().call(acknowledgeRequest);
      System.out.println(pullResponse.getReceivedMessagesList());
    }
  }
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Node.js Pub/Sub.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';

// Imports the Google Cloud client library. v1 is for the lower level
// proto access.
const {v1} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use.
const subClient = new v1.SubscriberClient();

async function synchronousPull(projectId, subscriptionNameOrId) {
  // The low level API client requires a name only.
  const formattedSubscription =
    subscriptionNameOrId.indexOf('/') >= 0
      ? subscriptionNameOrId
      : subClient.subscriptionPath(projectId, subscriptionNameOrId);

  // The maximum number of messages returned for this request.
  // Pub/Sub may return fewer than the number specified.
  const request = {
    subscription: formattedSubscription,
    maxMessages: 10,
  };

  // The subscriber pulls a specified number of messages.
  const [response] = await subClient.pull(request);

  // Process the messages.
  const ackIds = [];
  for (const message of response.receivedMessages || []) {
    console.log(`Received message: ${message.message.data}`);
    if (message.ackId) {
      ackIds.push(message.ackId);
    }
  }

  if (ackIds.length !== 0) {
    // Acknowledge all of the messages. You could also acknowledge
    // these individually, but this is more efficient.
    const ackRequest = {
      subscription: formattedSubscription,
      ackIds: ackIds,
    };

    await subClient.acknowledge(ackRequest);
  }

  console.log('Done.');
}

PHP

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Node.js Pub/Sub.

use Google\Cloud\PubSub\PubSubClient;

/**
 * Pulls all Pub/Sub messages for a subscription.
 *
 * @param string $projectId  The Google project ID.
 * @param string $subscriptionName  The Pub/Sub subscription name.
 */
function pull_messages($projectId, $subscriptionName)
{
    $pubsub = new PubSubClient([
        'projectId' => $projectId,
    ]);
    $subscription = $pubsub->subscription($subscriptionName);
    foreach ($subscription->pull() as $message) {
        printf('Message: %s' . PHP_EOL, $message->data());
        // Acknowledge the Pub/Sub message has been received, so it will not be pulled multiple times.
        $subscription->acknowledge($message);
    }
}

Ruby

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Ruby di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi API Ruby Pub/Sub.

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

subscriber.pull(immediate: false).each do |message|
  puts "Message pulled: #{message.data}"
  message.acknowledge!
end

Protokol

Permintaan:

POST https://pubsub.googleapis.com/v1/projects/myproject/subscriptions/mysubscription:pull

{
  "returnImmediately": "false",
  "maxMessages": "1"
}

Respons:

200 OK

{
  "receivedMessages": [{
    "ackId": "dQNNHlAbEGEIBERNK0EPKVgUWQYyODM2LwgRHFEZDDsLRk1SK...",
    "message": {
      "data": "SGVsbG8gQ2xvdWQgUHViL1N1YiEgSGVyZSBpcyBteSBtZXNzYWdlIQ==",
      "messageId": "19917247034"
    }
  }]
}

Permintaan:

POST https://pubsub.googleapis.com/v1/projects/myproject/subscriptions/mysubscription:acknowledge

{
  "ackIds": [
    "dQNNHlAbEGEIBERNK0EPKVgUWQYyODM2LwgRHFEZDDsLRk1SK..."
  ]
}

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di Panduan memulai: Menggunakan Library Klien. Untuk mengetahui informasi selengkapnya, lihat dokumentasi referensi Pub/Sub Python API.

from google.api_core import retry
from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"

subscriber = pubsub_v1.SubscriberClient()
subscription_path = subscriber.subscription_path(project_id, subscription_id)

NUM_MESSAGES = 3

# Wrap the subscriber in a 'with' block to automatically call close() to
# close the underlying gRPC channel when done.
with subscriber:
    # The subscriber pulls a specific number of messages. The actual
    # number of messages pulled may be smaller than max_messages.
    response = subscriber.pull(
        request={"subscription": subscription_path, "max_messages": NUM_MESSAGES},
        retry=retry.Retry(deadline=300),
    )

    if len(response.received_messages) == 0:
        return

    ack_ids = []
    for received_message in response.received_messages:
        print(f"Received: {received_message.message.data}.")
        ack_ids.append(received_message.ack_id)

    # Acknowledges the received messages so they will not be sent again.
    subscriber.acknowledge(
        request={"subscription": subscription_path, "ack_ids": ack_ids}
    )

    print(
        f"Received and acknowledged {len(response.received_messages)} messages from {subscription_path}."
    )

Langkah berikutnya

Buat atau ubah langganan dengan perintah gcloud.
Buat atau ubah langganan dengan REST API.
Buat atau ubah langganan dengan RPC API.

Menerima pesan dari langganan pull Tetap teratur dengan koleksi Simpan dan kategorikan konten berdasarkan preferensi Anda.

Sebelum memulai

Peran dan izin yang diperlukan

Izin yang diperlukan

Mengambil pesan dari langganan

StreamingPull API

StreamingPull dan contoh kode library klien tingkat tinggi

C++

C#

Go

Java

Node.js

Node.js

Python

Ruby

Mengambil atribut kustom menggunakan library klien tingkat tinggi

C++

C#

Go

Java

Node.js

Python

Ruby

Menangani error menggunakan library klien tingkat tinggi

C++

Go

Java

Node.js

Python

Ruby

Tarik unary

Pertimbangan

Konsol

gcloud

Library Klien

C++

C#

Java

Node.js

PHP

Ruby

Protokol

Python

Langkah berikutnya

Menerima pesan dari langganan pull