Questa pagina è stata tradotta dall'API Cloud Translation.

Ricevere messaggi da una sottoscrizione pull

Questo documento descrive come ricevere messaggi da una sottoscrizione pull. Puoi utilizzare la console Google Cloud , Google Cloud CLI, la libreria client o l'API Pub/Sub per creare una sottoscrizione pull.

Prima di iniziare

Crea una sottoscrizione pull.

Ruoli e autorizzazioni richiesti

Per ottenere le autorizzazioni necessarie per estrarre i messaggi dalle sottoscrizioni e gestirli, chiedi all'amministratore di concederti il ruolo IAM Pub/Sub Subscriber (roles/pubsub.subscriber) nel progetto. Per saperne di più sulla concessione dei ruoli, consulta Gestisci l'accesso a progetti, cartelle e organizzazioni.

Questo ruolo predefinito contiene le autorizzazioni necessarie per estrarre i messaggi dalle sottoscrizioni e gestirli. Per vedere quali sono esattamente le autorizzazioni richieste, espandi la sezione Autorizzazioni obbligatorie:

Autorizzazioni obbligatorie

Per eseguire il pull dei messaggi dalle sottoscrizioni e gestirli sono necessarie le seguenti autorizzazioni:

Pull da un abbonamento: pubsub.subscriptions.consume
Crea un abbonamento: pubsub.subscriptions.create
Eliminare un abbonamento: pubsub.subscriptions.delete
Acquista un abbonamento: pubsub.subscriptions.get
Elenca un abbonamento: pubsub.subscriptions.list
Aggiornare un abbonamento: pubsub.subscriptions.update
Allega un abbonamento a un argomento: pubsub.topics.attachSubscription
Recupera il criterio IAM per un abbonamento: pubsub.subscriptions.getIamPolicy
Configura la policy IAM per un abbonamento: pubsub.subscriptions.setIamPolicy
Concedi l'autorizzazione per utilizzare i messaggi di una sottoscrizione sulla sottoscrizione pull: pubsub.subscriptions.consume

Potresti anche ottenere queste autorizzazioni con ruoli personalizzati o altri ruoli predefiniti.

Eseguire il pull di un messaggio da una sottoscrizione

Gli esempi riportati di seguito mostrano come estrarre un messaggio da una sottoscrizione utilizzando l'API StreamingPull o l'API Pull.

API StreamingPull

Per utilizzare l'API StreamingPull, devi utilizzare una libreria client.

La console Google Cloud e Google Cloud CLI non supportano l'API StreamingPull.

Esempi di codice di StreamingPull e della libreria client di alto livello

C++

Prima di provare questo esempio, segui le istruzioni di configurazione di C++ nella guida rapida all'utilizzo delle librerie client. Per saperne di più, consulta la documentazione di riferimento dell'API C++ di Pub/Sub.

namespace pubsub = ::google::cloud::pubsub;
auto sample = [](pubsub::Subscriber subscriber) {
  return subscriber.Subscribe(
      [&](pubsub::Message const& m, pubsub::AckHandler h) {
        std::cout << "Received message " << m << "\n";
        std::move(h).ack();
        PleaseIgnoreThisSimplifiesTestingTheSamples();
      });
};

C#

Prima di provare questo esempio, segui le istruzioni di configurazione di C# nella guida rapida all'utilizzo delle librerie client. Per saperne di più, consulta la documentazione di riferimento dell'API Pub/Sub C#.


using Google.Cloud.PubSub.V1;
using System;
using System.Threading;
using System.Threading.Tasks;

public class PullMessagesAsyncSample
{
    public async Task<int> PullMessagesAsync(string projectId, string subscriptionId, bool acknowledge)
    {
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);
        SubscriberClient subscriber = await SubscriberClient.CreateAsync(subscriptionName);
        // SubscriberClient runs your message handle function on multiple
        // threads to maximize throughput.
        int messageCount = 0;
        Task startTask = subscriber.StartAsync((PubsubMessage message, CancellationToken cancel) =>
        {
            string text = message.Data.ToStringUtf8();
            Console.WriteLine($"Message {message.MessageId}: {text}");
            Interlocked.Increment(ref messageCount);
            return Task.FromResult(acknowledge ? SubscriberClient.Reply.Ack : SubscriberClient.Reply.Nack);
        });
        // Run for 5 seconds.
        await Task.Delay(5000);
        await subscriber.StopAsync(CancellationToken.None);
        // Lets make sure that the start task finished successfully after the call to stop.
        await startTask;
        return messageCount;
    }
}

Go

L'esempio seguente utilizza la versione principale della libreria client Go Pub/Sub (v2). Se utilizzi ancora la libreria v1, consulta la guida alla migrazione alla v2. Per visualizzare un elenco di esempi di codice della versione 1, consulta gli esempi di codice deprecati.

Prima di provare questo esempio, segui le istruzioni di configurazione di Go nella guida rapida all'utilizzo delle librerie client. Per saperne di più, consulta la documentazione di riferimento dell'API Pub/Sub Go.

import (
	"context"
	"fmt"
	"io"
	"sync/atomic"
	"time"

	"cloud.google.com/go/pubsub/v2"
)

func pullMsgs(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	// client.Subscriber can be passed a subscription ID (e.g. "my-sub") or
	// a fully qualified name (e.g. "projects/my-project/subscriptions/my-sub").
	// If a subscription ID is provided, the project ID from the client is used.
	sub := client.Subscriber(subID)

	// Receive messages for 10 seconds, which simplifies testing.
	// Comment this out in production, since `Receive` should
	// be used as a long running operation.
	ctx, cancel := context.WithTimeout(ctx, 10*time.Second)
	defer cancel()

	var received int32
	err = sub.Receive(ctx, func(_ context.Context, msg *pubsub.Message) {
		fmt.Fprintf(w, "Got message: %q\n", string(msg.Data))
		atomic.AddInt32(&received, 1)
		msg.Ack()
	})
	if err != nil {
		return fmt.Errorf("sub.Receive: %w", err)
	}
	fmt.Fprintf(w, "Received %d messages\n", received)

	return nil
}

Java

Prima di provare questo esempio, segui le istruzioni di configurazione di Java nella guida rapida all'utilizzo delle librerie client. Per saperne di più, consulta la documentazione di riferimento dell'API Java di Pub/Sub.


import com.google.cloud.pubsub.v1.AckReplyConsumer;
import com.google.cloud.pubsub.v1.MessageReceiver;
import com.google.cloud.pubsub.v1.Subscriber;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PubsubMessage;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class SubscribeAsyncExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";

    subscribeAsyncExample(projectId, subscriptionId);
  }

  public static void subscribeAsyncExample(String projectId, String subscriptionId) {
    ProjectSubscriptionName subscriptionName =
        ProjectSubscriptionName.of(projectId, subscriptionId);

    // Instantiate an asynchronous message receiver.
    MessageReceiver receiver =
        (PubsubMessage message, AckReplyConsumer consumer) -> {
          // Handle incoming message, then ack the received message.
          System.out.println("Id: " + message.getMessageId());
          System.out.println("Data: " + message.getData().toStringUtf8());
          consumer.ack();
        };

    Subscriber subscriber = null;
    try {
      subscriber = Subscriber.newBuilder(subscriptionName, receiver).build();
      // Start the subscriber.
      subscriber.startAsync().awaitRunning();
      System.out.printf("Listening for messages on %s:\n", subscriptionName.toString());
      // Allow the subscriber to run for 30s unless an unrecoverable error occurs.
      subscriber.awaitTerminated(30, TimeUnit.SECONDS);
    } catch (TimeoutException timeoutException) {
      // Shut down the subscriber after 30s. Stop receiving messages.
      subscriber.stopAsync();
    }
  }
}

Node.js

Prima di provare questo esempio, segui le istruzioni di configurazione di Node.js nella guida rapida all'utilizzo delle librerie client. Per saperne di più, consulta la documentazione di riferimento dell'API Pub/Sub Node.js.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 60;

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

function listenForMessages(subscriptionNameOrId, timeout) {
  // References an existing subscription; if you are unsure if the
  // subscription will exist, try the optimisticSubscribe sample.
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  let messageCount = 0;
  const messageHandler = message => {
    console.log(`Received message ${message.id}:`);
    console.log(`\tData: ${message.data}`);
    console.log(`\tAttributes: ${message.attributes}`);
    messageCount += 1;

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Listen for new messages until timeout is hit
  subscription.on('message', messageHandler);

  // Wait a while for the subscription to run. (Part of the sample only.)
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
    console.log(`${messageCount} message(s) received.`);
  }, timeout * 1000);
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 60;

// Imports the Google Cloud client library
import {PubSub, Message} from '@google-cloud/pubsub';

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

function listenForMessages(subscriptionNameOrId: string, timeout: number) {
  // References an existing subscription; if you are unsure if the
  // subscription will exist, try the optimisticSubscribe sample.
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  let messageCount = 0;
  const messageHandler = (message: Message) => {
    console.log(`Received message ${message.id}:`);
    console.log(`\tData: ${message.data}`);
    console.log(`\tAttributes: ${message.attributes}`);
    messageCount += 1;

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Listen for new messages until timeout is hit
  subscription.on('message', messageHandler);

  // Wait a while for the subscription to run. (Part of the sample only.)
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
    console.log(`${messageCount} message(s) received.`);
  }, timeout * 1000);
}

Python

Prima di provare questo esempio, segui le istruzioni di configurazione di Python nella guida rapida all'utilizzo delle librerie client. Per saperne di più, consulta la documentazione di riferimento dell'API Pub/Sub Python.

from concurrent.futures import TimeoutError
from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"
# Number of seconds the subscriber should listen for messages
# timeout = 5.0

subscriber = pubsub_v1.SubscriberClient()
# The `subscription_path` method creates a fully qualified identifier
# in the form `projects/{project_id}/subscriptions/{subscription_id}`
subscription_path = subscriber.subscription_path(project_id, subscription_id)

def callback(message: pubsub_v1.subscriber.message.Message) -> None:
    print(f"Received {message}.")
    message.ack()

streaming_pull_future = subscriber.subscribe(subscription_path, callback=callback)
print(f"Listening for messages on {subscription_path}..\n")

# Wrap subscriber in a 'with' block to automatically call close() when done.
with subscriber:
    try:
        # When `timeout` is not set, result() will block indefinitely,
        # unless an exception is encountered first.
        streaming_pull_future.result(timeout=timeout)
    except TimeoutError:
        streaming_pull_future.cancel()  # Trigger the shutdown.
        streaming_pull_future.result()  # Block until the shutdown is complete.

Ruby

L'esempio seguente utilizza la libreria client Ruby Pub/Sub v3. Se utilizzi ancora la libreria v2, consulta la guida alla migrazione alla v3. Per visualizzare un elenco di esempi di codice Ruby v2, consulta gli esempi di codice deprecati.

Prima di provare questo esempio, segui le istruzioni di configurazione di Ruby nella guida rapida all'utilizzo delle librerie client. Per saperne di più, consulta la documentazione di riferimento dell'API Pub/Sub Ruby.

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

listener = subscriber.listen do |received_message|
  puts "Received message: #{received_message.data}"
  received_message.acknowledge!
end

listener.start
# Let the main thread sleep for 60 seconds so the thread for listening
# messages does not quit
sleep 60
listener.stop.wait!

Recuperare gli attributi personalizzati utilizzando la libreria client di alto livello

Gli esempi riportati di seguito mostrano come estrarre i messaggi in modo asincrono e recuperare gli attributi personalizzati dai metadati.

C++

namespace pubsub = ::google::cloud::pubsub;
auto sample = [](pubsub::Subscriber subscriber) {
  return subscriber.Subscribe(
      [&](pubsub::Message const& m, pubsub::AckHandler h) {
        std::cout << "Received message with attributes:\n";
        for (auto& kv : m.attributes()) {
          std::cout << "  " << kv.first << ": " << kv.second << "\n";
        }
        std::move(h).ack();
        PleaseIgnoreThisSimplifiesTestingTheSamples();
      });
};

C#


using Google.Cloud.PubSub.V1;
using System;
using System.Collections.Generic;
using System.Threading;
using System.Threading.Tasks;

public class PullMessagesWithCustomAttributesAsyncSample
{
    public async Task<List<PubsubMessage>> PullMessagesWithCustomAttributesAsync(string projectId, string subscriptionId, bool acknowledge)
    {
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);

        SubscriberClient subscriber = await SubscriberClient.CreateAsync(subscriptionName);
        var messages = new List<PubsubMessage>();
        Task startTask = subscriber.StartAsync((PubsubMessage message, CancellationToken cancel) =>
        {
            messages.Add(message);
            string text = message.Data.ToStringUtf8();
            Console.WriteLine($"Message {message.MessageId}: {text}");
            if (message.Attributes != null)
            {
                foreach (var attribute in message.Attributes)
                {
                    Console.WriteLine($"{attribute.Key} = {attribute.Value}");
                }
            }
            return Task.FromResult(acknowledge ? SubscriberClient.Reply.Ack : SubscriberClient.Reply.Nack);
        });
        // Run for 7 seconds.
        await Task.Delay(7000);
        await subscriber.StopAsync(CancellationToken.None);
        // Lets make sure that the start task finished successfully after the call to stop.
        await startTask;
        return messages;
    }
}

Go

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/pubsub/v2"
)

func pullMsgsCustomAttributes(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	// client.Subscriber can be passed a subscription ID (e.g. "my-sub") or
	// a fully qualified name (e.g. "projects/my-project/subscriptions/my-sub").
	// If a subscription ID is provided, the project ID from the client is used.
	sub := client.Subscriber(subID)

	// Receive messages for 10 seconds, which simplifies testing.
	// Comment this out in production, since `Receive` should
	// be used as a long running operation.
	ctx, cancel := context.WithTimeout(ctx, 10*time.Second)
	defer cancel()

	// Receive blocks until the context is cancelled or an error occurs.
	err = sub.Receive(ctx, func(_ context.Context, msg *pubsub.Message) {
		fmt.Fprintf(w, "Got message :%q\n", string(msg.Data))
		fmt.Fprintln(w, "Attributes:")
		for key, value := range msg.Attributes {
			fmt.Fprintf(w, "%s = %s\n", key, value)
		}
		msg.Ack()
	})
	if err != nil {
		return fmt.Errorf("sub.Receive: %w", err)
	}

	return nil
}

Java


import com.google.cloud.pubsub.v1.AckReplyConsumer;
import com.google.cloud.pubsub.v1.MessageReceiver;
import com.google.cloud.pubsub.v1.Subscriber;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PubsubMessage;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class SubscribeWithCustomAttributesExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";

    subscribeWithCustomAttributesExample(projectId, subscriptionId);
  }

  public static void subscribeWithCustomAttributesExample(String projectId, String subscriptionId) {
    ProjectSubscriptionName subscriptionName =
        ProjectSubscriptionName.of(projectId, subscriptionId);

    // Instantiate an asynchronous message receiver.
    MessageReceiver receiver =
        (PubsubMessage message, AckReplyConsumer consumer) -> {
          // Handle incoming message, then ack the received message.
          System.out.println("Id: " + message.getMessageId());
          System.out.println("Data: " + message.getData().toStringUtf8());
          // Print message attributes.
          message
              .getAttributesMap()
              .forEach((key, value) -> System.out.println(key + " = " + value));
          consumer.ack();
        };

    Subscriber subscriber = null;
    try {
      subscriber = Subscriber.newBuilder(subscriptionName, receiver).build();
      // Start the subscriber.
      subscriber.startAsync().awaitRunning();
      System.out.printf("Listening for messages on %s:\n", subscriptionName.toString());
      // Allow the subscriber to run for 30s unless an unrecoverable error occurs.
      subscriber.awaitTerminated(30, TimeUnit.SECONDS);
    } catch (TimeoutException timeoutException) {
      // Shut down the subscriber after 30s. Stop receiving messages.
      subscriber.stopAsync();
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 60;

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

async function listenWithCustomAttributes(subscriptionNameOrId, timeout) {
  // References an existing subscription, e.g. "my-subscription"
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  const messageHandler = message => {
    console.log(
      `Received message: id ${message.id}, data ${
        message.data
      }, attributes: ${JSON.stringify(message.attributes)}`,
    );

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Wait a while for the subscription to run. (Part of the sample only.)
  subscription.on('message', messageHandler);
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
  }, timeout * 1000);
}

Python

from concurrent.futures import TimeoutError
from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"
# Number of seconds the subscriber should listen for messages
# timeout = 5.0

subscriber = pubsub_v1.SubscriberClient()
subscription_path = subscriber.subscription_path(project_id, subscription_id)

def callback(message: pubsub_v1.subscriber.message.Message) -> None:
    print(f"Received {message.data!r}.")
    if message.attributes:
        print("Attributes:")
        for key in message.attributes:
            value = message.attributes.get(key)
            print(f"{key}: {value}")
    message.ack()

streaming_pull_future = subscriber.subscribe(subscription_path, callback=callback)
print(f"Listening for messages on {subscription_path}..\n")

# Wrap subscriber in a 'with' block to automatically call close() when done.
with subscriber:
    try:
        # When `timeout` is not set, result() will block indefinitely,
        # unless an exception is encountered first.
        streaming_pull_future.result(timeout=timeout)
    except TimeoutError:
        streaming_pull_future.cancel()  # Trigger the shutdown.
        streaming_pull_future.result()  # Block until the shutdown is complete.

Ruby

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

listener = subscriber.listen do |received_message|
  puts "Received message: #{received_message.data}"
  unless received_message.attributes.empty?
    puts "Attributes:"
    received_message.attributes.each do |key, value|
      puts "#{key}: #{value}"
    end
  end
  received_message.acknowledge!
end

listener.start
# Let the main thread sleep for 60 seconds so the thread for listening
# messages does not quit
sleep 60
listener.stop.wait!

Gestire gli errori utilizzando la libreria client di alto livello

Gli esempi riportati di seguito mostrano come gestire gli errori che si verificano durante la sottoscrizione ai messaggi.

C++

namespace pubsub = ::google::cloud::pubsub;
using ::google::cloud::future;
auto sample = [](pubsub::Subscriber subscriber) {
  return subscriber
      .Subscribe([&](pubsub::Message const& m, pubsub::AckHandler h) {
        std::cout << "Received message " << m << "\n";
        std::move(h).ack();
        PleaseIgnoreThisSimplifiesTestingTheSamples();
      })
      // Setup an error handler for the subscription session
      .then([](future<google::cloud::Status> f) {
        std::cout << "Subscription session result: " << f.get() << "\n";
      });
};

Go

import (
	"context"
	"fmt"
	"io"

	"cloud.google.com/go/pubsub/v2"
)

func pullMsgsError(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	// If the service returns a non-retryable error, Receive returns that error after
	// all of the outstanding calls to the handler have returned.
	// client.Subscriber can be passed a subscription ID (e.g. "my-sub") or
	// a fully qualified name (e.g. "projects/my-project/subscriptions/my-sub").
	// If a subscription ID is provided, the project ID from the client is used.
	sub := client.Subscriber(subID)
	err = sub.Receive(ctx, func(ctx context.Context, msg *pubsub.Message) {
		fmt.Fprintf(w, "Got message: %q\n", string(msg.Data))
		msg.Ack()
	})
	if err != nil {
		return fmt.Errorf("Receive: %w", err)
	}
	return nil
}

Java


import com.google.api.gax.core.ExecutorProvider;
import com.google.api.gax.core.InstantiatingExecutorProvider;
import com.google.cloud.pubsub.v1.AckReplyConsumer;
import com.google.cloud.pubsub.v1.MessageReceiver;
import com.google.cloud.pubsub.v1.Subscriber;
import com.google.common.util.concurrent.MoreExecutors;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PubsubMessage;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class SubscribeWithErrorListenerExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";

    subscribeWithErrorListenerExample(projectId, subscriptionId);
  }

  public static void subscribeWithErrorListenerExample(String projectId, String subscriptionId) {
    ProjectSubscriptionName subscriptionName =
        ProjectSubscriptionName.of(projectId, subscriptionId);

    // Instantiate an asynchronous message receiver.
    MessageReceiver receiver =
        (PubsubMessage message, AckReplyConsumer consumer) -> {
          // Handle incoming message, then ack the received message.
          System.out.println("Id: " + message.getMessageId());
          System.out.println("Data: " + message.getData().toStringUtf8());
          consumer.ack();
        };

    Subscriber subscriber = null;
    try {
      // Provides an executor service for processing messages.
      ExecutorProvider executorProvider =
          InstantiatingExecutorProvider.newBuilder().setExecutorThreadCount(4).build();

      subscriber =
          Subscriber.newBuilder(subscriptionName, receiver)
              .setExecutorProvider(executorProvider)
              .build();

      // Listen for unrecoverable failures.
      subscriber.addListener(
          new Subscriber.Listener() {
            public void failed(Subscriber.State from, Throwable failure) {
              System.out.println("Unrecoverable subscriber failure:" + failure.getStackTrace());
            }
          },
          MoreExecutors.directExecutor());

      // Start the subscriber.
      subscriber.startAsync().awaitRunning();
      System.out.printf("Listening for messages on %s:\n", subscriptionName.toString());
      // Allow the subscriber to run for 30s unless an unrecoverable error occurs.
      subscriber.awaitTerminated(30, TimeUnit.SECONDS);
    } catch (TimeoutException timeoutException) {
      // Shut down the subscriber after 30s. Stop receiving messages.
      subscriber.stopAsync();
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const timeout = 10;

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

function listenForErrors(subscriptionNameOrId, timeout) {
  // References an existing subscription
  const subscription = pubSubClient.subscription(subscriptionNameOrId);

  // Create an event handler to handle messages
  const messageHandler = message => {
    // Do something with the message
    console.log(`Message: ${message}`);

    // "Ack" (acknowledge receipt of) the message
    message.ack();
  };

  // Create an event handler to handle errors
  const errorHandler = error => {
    // Do something with the error
    console.error(`ERROR: ${error}`);
    throw error;
  };

  // Listen for new messages/errors until timeout is hit
  subscription.on('message', messageHandler);
  subscription.on('error', errorHandler);

  // Wait a while for the subscription to run. (Part of the sample only.)
  setTimeout(() => {
    subscription.removeListener('message', messageHandler);
    subscription.removeListener('error', errorHandler);
  }, timeout * 1000);
}

Python

from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"
# Number of seconds the subscriber should listen for messages
# timeout = 5.0

subscriber = pubsub_v1.SubscriberClient()
subscription_path = subscriber.subscription_path(project_id, subscription_id)

def callback(message: pubsub_v1.subscriber.message.Message) -> None:
    print(f"Received {message}.")
    message.ack()

streaming_pull_future = subscriber.subscribe(subscription_path, callback=callback)
print(f"Listening for messages on {subscription_path}..\n")

# Wrap subscriber in a 'with' block to automatically call close() when done.
with subscriber:
    # When `timeout` is not set, result() will block indefinitely,
    # unless an exception is encountered first.
    try:
        streaming_pull_future.result(timeout=timeout)
    except Exception as e:
        print(
            f"Listening for messages on {subscription_path} threw an exception: {e}."
        )
        streaming_pull_future.cancel()  # Trigger the shutdown.
        streaming_pull_future.result()  # Block until the shutdown is complete.

Ruby

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

listener = subscriber.listen do |received_message|
  puts "Received message: #{received_message.data}"
  received_message.acknowledge!
end

# Propagate exception from child threads to the main thread as soon as it is
# raised. Exceptions happened in the callback thread are collected in the
# callback thread pool and do not propagate to the main thread
Thread.abort_on_exception = true

begin
  listener.start
  # Let the main thread sleep for 60 seconds so the thread for listening
  # messages does not quit
  sleep 60
  listener.stop.wait!
rescue StandardError => e
  puts "Exception #{e.inspect}: #{e.message}"
  raise "Stopped listening for messages."
end

Unary pull

Per utilizzare l'API Unary, puoi utilizzare la console Google Cloud , Google Cloud CLI o una libreria client.

Considerazioni

Pub/Sub fornisce un elenco di messaggi. Se l'elenco contiene più messaggi, Pub/Sub ordina i messaggi con la stessa chiave di ordinamento. Di seguito sono riportati alcuni importanti avvertimenti:

L'impostazione di un valore per max_messages nella richiesta non garantisce che vengano restituiti max_messages, anche se ci sono molti messaggi nel backlog. L'API Pub/Sub Pull potrebbe restituire meno di max_messages per ridurre la latenza di consegna dei messaggi che sono immediatamente disponibili per la consegna.
Una risposta pull con 0 messaggi non deve essere utilizzata come indicatore che non ci sono messaggi nel backlog. È possibile ricevere una risposta con 0 messaggi e avere una richiesta successiva che restituisce messaggi.

Console

Nella Google Cloud console, vai alla pagina Sottoscrizioni Pub/Sub.

Vai agli abbonamenti
Fai clic sul nome dell'abbonamento da cui vuoi estrarre i dati.
Nella scheda Messaggi, fai clic su Pull.

Dovresti visualizzare i messaggi che hai pubblicato per questo abbonamento e l'ora in cui sono stati pubblicati.

Quando utilizzi la console Google Cloud , un singolo pull per un volume di messaggi ridotto può spesso restituire zero messaggi. Se non vedi messaggi, fai clic su Pull più volte per inviare più richieste di pull. Questo problema non riguarda le librerie client Pub/Sub.

gcloud

Per eseguire il pull di un messaggio da una sottoscrizione, esegui il comando gcloud pubsub subscriptions pull. gcloud CLI stampa il messaggio nella riga di comando.

gcloud pubsub subscriptions pull SUBSCRIPTION_NAME --auto-ack

Sostituisci:

SUBSCRIPTION_NAME: il nome dell'abbonamento da cui vuoi estrarre i messaggi.

Librerie client

Ecco un codice campione per recuperare e confermare un numero fisso di messaggi.

C++

[](google::cloud::pubsub::Subscriber subscriber) {
  auto response = subscriber.Pull();
  if (!response) throw std::move(response).status();
  std::cout << "Received message " << response->message << "\n";
  std::move(response->handler).ack();
}

C#


using Google.Cloud.PubSub.V1;
using Grpc.Core;
using System;
using System.Linq;
using System.Threading;

public class PullMessagesSyncSample
{
    public int PullMessagesSync(string projectId, string subscriptionId, bool acknowledge)
    {
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);
        SubscriberServiceApiClient subscriberClient = SubscriberServiceApiClient.Create();
        int messageCount = 0;
        try
        {
            // Pull messages from server,
            // allowing an immediate response if there are no messages.
            PullResponse response = subscriberClient.Pull(subscriptionName, maxMessages: 20);
            // Print out each received message.
            foreach (ReceivedMessage msg in response.ReceivedMessages)
            {
                string text = msg.Message.Data.ToStringUtf8();
                Console.WriteLine($"Message {msg.Message.MessageId}: {text}");
                Interlocked.Increment(ref messageCount);
            }
            // If acknowledgement required, send to server.
            if (acknowledge && messageCount > 0)
            {
                subscriberClient.Acknowledge(subscriptionName, response.ReceivedMessages.Select(msg => msg.AckId));
            }
        }
        catch (RpcException ex) when (ex.Status.StatusCode == StatusCode.Unavailable)
        {
            // UNAVAILABLE due to too many concurrent pull requests pending for the given subscription.
        }
        return messageCount;
    }
}

Java


import com.google.cloud.pubsub.v1.stub.GrpcSubscriberStub;
import com.google.cloud.pubsub.v1.stub.SubscriberStub;
import com.google.cloud.pubsub.v1.stub.SubscriberStubSettings;
import com.google.pubsub.v1.AcknowledgeRequest;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PullRequest;
import com.google.pubsub.v1.PullResponse;
import com.google.pubsub.v1.ReceivedMessage;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class SubscribeSyncExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String subscriptionId = "your-subscription-id";
    Integer numOfMessages = 10;

    subscribeSyncExample(projectId, subscriptionId, numOfMessages);
  }

  public static void subscribeSyncExample(
      String projectId, String subscriptionId, Integer numOfMessages) throws IOException {
    SubscriberStubSettings subscriberStubSettings =
        SubscriberStubSettings.newBuilder()
            .setTransportChannelProvider(
                SubscriberStubSettings.defaultGrpcTransportProviderBuilder()
                    .setMaxInboundMessageSize(20 * 1024 * 1024) // 20MB (maximum message size).
                    .build())
            .build();

    try (SubscriberStub subscriber = GrpcSubscriberStub.create(subscriberStubSettings)) {
      String subscriptionName = ProjectSubscriptionName.format(projectId, subscriptionId);
      PullRequest pullRequest =
          PullRequest.newBuilder()
              .setMaxMessages(numOfMessages)
              .setSubscription(subscriptionName)
              .build();

      // Use pullCallable().futureCall to asynchronously perform this operation.
      PullResponse pullResponse = subscriber.pullCallable().call(pullRequest);

      // Stop the program if the pull response is empty to avoid acknowledging
      // an empty list of ack IDs.
      if (pullResponse.getReceivedMessagesList().isEmpty()) {
        System.out.println("No message was pulled. Exiting.");
        return;
      }

      List<String> ackIds = new ArrayList<>();
      for (ReceivedMessage message : pullResponse.getReceivedMessagesList()) {
        // Handle received message
        // ...
        ackIds.add(message.getAckId());
      }

      // Acknowledge received messages.
      AcknowledgeRequest acknowledgeRequest =
          AcknowledgeRequest.newBuilder()
              .setSubscription(subscriptionName)
              .addAllAckIds(ackIds)
              .build();

      // Use acknowledgeCallable().futureCall to asynchronously perform this operation.
      subscriber.acknowledgeCallable().call(acknowledgeRequest);
      System.out.println(pullResponse.getReceivedMessagesList());
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';

// Imports the Google Cloud client library. v1 is for the lower level
// proto access.
const {v1} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use.
const subClient = new v1.SubscriberClient();

async function synchronousPull(projectId, subscriptionNameOrId) {
  // The low level API client requires a name only.
  const formattedSubscription =
    subscriptionNameOrId.indexOf('/') >= 0
      ? subscriptionNameOrId
      : subClient.subscriptionPath(projectId, subscriptionNameOrId);

  // The maximum number of messages returned for this request.
  // Pub/Sub may return fewer than the number specified.
  const request = {
    subscription: formattedSubscription,
    maxMessages: 10,
  };

  // The subscriber pulls a specified number of messages.
  const [response] = await subClient.pull(request);

  // Process the messages.
  const ackIds = [];
  for (const message of response.receivedMessages || []) {
    console.log(`Received message: ${message.message.data}`);
    if (message.ackId) {
      ackIds.push(message.ackId);
    }
  }

  if (ackIds.length !== 0) {
    // Acknowledge all of the messages. You could also acknowledge
    // these individually, but this is more efficient.
    const ackRequest = {
      subscription: formattedSubscription,
      ackIds: ackIds,
    };

    await subClient.acknowledge(ackRequest);
  }

  console.log('Done.');
}

PHP

use Google\Cloud\PubSub\PubSubClient;

/**
 * Pulls all Pub/Sub messages for a subscription.
 *
 * @param string $projectId  The Google project ID.
 * @param string $subscriptionName  The Pub/Sub subscription name.
 */
function pull_messages($projectId, $subscriptionName)
{
    $pubsub = new PubSubClient([
        'projectId' => $projectId,
    ]);
    $subscription = $pubsub->subscription($subscriptionName);
    foreach ($subscription->pull() as $message) {
        printf('Message: %s' . PHP_EOL, $message->data());
        // Acknowledge the Pub/Sub message has been received, so it will not be pulled multiple times.
        $subscription->acknowledge($message);
    }
}

Ruby

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::PubSub.new
subscriber = pubsub.subscriber subscription_id

subscriber.pull(immediate: false).each do |message|
  puts "Message pulled: #{message.data}"
  message.acknowledge!
end

Protocollo

Richiesta:

POST https://pubsub.googleapis.com/v1/projects/myproject/subscriptions/mysubscription:pull

{
  "returnImmediately": "false",
  "maxMessages": "1"
}

Risposta:

200 OK

{
  "receivedMessages": [{
    "ackId": "dQNNHlAbEGEIBERNK0EPKVgUWQYyODM2LwgRHFEZDDsLRk1SK...",
    "message": {
      "data": "SGVsbG8gQ2xvdWQgUHViL1N1YiEgSGVyZSBpcyBteSBtZXNzYWdlIQ==",
      "messageId": "19917247034"
    }
  }]
}

Richiesta:

POST https://pubsub.googleapis.com/v1/projects/myproject/subscriptions/mysubscription:acknowledge

{
  "ackIds": [
    "dQNNHlAbEGEIBERNK0EPKVgUWQYyODM2LwgRHFEZDDsLRk1SK..."
  ]
}

Python

from google.api_core import retry
from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"

subscriber = pubsub_v1.SubscriberClient()
subscription_path = subscriber.subscription_path(project_id, subscription_id)

NUM_MESSAGES = 3

# Wrap the subscriber in a 'with' block to automatically call close() to
# close the underlying gRPC channel when done.
with subscriber:
    # The subscriber pulls a specific number of messages. The actual
    # number of messages pulled may be smaller than max_messages.
    response = subscriber.pull(
        request={"subscription": subscription_path, "max_messages": NUM_MESSAGES},
        retry=retry.Retry(deadline=300),
    )

    if len(response.received_messages) == 0:
        return

    ack_ids = []
    for received_message in response.received_messages:
        print(f"Received: {received_message.message.data}.")
        ack_ids.append(received_message.ack_id)

    # Acknowledges the received messages so they will not be sent again.
    subscriber.acknowledge(
        request={"subscription": subscription_path, "ack_ids": ack_ids}
    )

    print(
        f"Received and acknowledged {len(response.received_messages)} messages from {subscription_path}."
    )

Passaggi successivi

Crea o modifica un abbonamento con i comandi gcloud.
Crea o modifica un abbonamento con le API REST.
Crea o modifica un abbonamento con le API RPC.

Ricevere messaggi da una sottoscrizione pull Mantieni tutto organizzato con le raccolte Salva e classifica i contenuti in base alle tue preferenze.

Prima di iniziare

Ruoli e autorizzazioni richiesti

Autorizzazioni obbligatorie

Eseguire il pull di un messaggio da una sottoscrizione

API StreamingPull

Esempi di codice di StreamingPull e della libreria client di alto livello

C++

C#

Go

Java

Node.js

Node.js

Python

Ruby

Recuperare gli attributi personalizzati utilizzando la libreria client di alto livello

C++

C#

Go

Java

Node.js

Python

Ruby

Gestire gli errori utilizzando la libreria client di alto livello

C++

Go

Java

Node.js

Python

Ruby

Unary pull

Considerazioni

Console

gcloud

Librerie client

C++

C#

Java

Node.js

PHP

Ruby

Protocollo

Python

Passaggi successivi

Ricevere messaggi da una sottoscrizione pull