Running the Automated Speech Recognition (ASR) model

This tutorial shows you how to train an Automated Speech Recognition (ASR) model using the publicly available Librispeech ASR corpus dataset with Tensor2Tensor on a Cloud TPU.

The speech recognition model is just one of the models in the Tensor2Tensor library. Tensor2Tensor (T2T) is a library of deep learning models and datasets as well as a set of scripts that allow you to train the models and to download and prepare the data. This model does speech-to-text conversion.

Objectives

Create a Cloud Storage bucket to hold your dataset and model output.
Download and prepare the Tensor2Tensor library dataset.
Run the training job.
Verify the output results.

Costs

This tutorial uses billable components of Google Cloud, including:

Compute Engine
Cloud TPU
Cloud Storage

Use the pricing calculator to generate a cost estimate based on your projected usage. New Google Cloud users might be eligible for a free trial.

Before you begin

Before starting this tutorial, check that your Google Cloud project is correctly set up.

Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.
In the Google Cloud Console, on the project selector page, select or create a Google Cloud project.

Note: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.

Go to project selector
Make sure that billing is enabled for your Cloud project. Learn how to confirm that billing is enabled for your project.

This walkthrough uses billable components of Google Cloud. Check the Cloud TPU pricing page to estimate your costs. Be sure to clean up resources you create when you've finished with them to avoid unnecessary charges.

Set up your resources

This section provides information on setting up Cloud Storage bucket, VM, and Cloud TPU resources for tutorials.

Open a Cloud Shell window.

Open Cloud Shell
Create a variable for your project's ID.
```
export PROJECT_ID=project-id
```
Configure gcloud command-line tool to use the project where you want to create Cloud TPU.
```
gcloud config set project ${PROJECT_ID}
```
The first time you run this command in a new Cloud Shell VM, an Authorize Cloud Shell page is displayed. Click Authorize at the bottom of the page to allow gcloud to make GCP API calls with your credentials.

Create a Service Account for the Cloud TPU project.

gcloud beta services identity create --service tpu.googleapis.com --project $PROJECT_ID

The command returns a Cloud TPU Service Account with following format:

service-PROJECT_NUMBER@cloud-tpu.iam.gserviceaccount.com

Create a Cloud Storage bucket using the following command:
```
gsutil mb -p ${PROJECT_ID} -c standard -l europe-west4 -b on gs://bucket-name
```
This Cloud Storage bucket stores the data you use to train your model and the training results. The gcloud tool used in this tutorial sets up default permissions for the Cloud TPU Service Account. If you want finer-grain permissions, review the access level permissions.

The bucket location must be in the same region as your virtual machine (VM) and your TPU node. VMs and TPU nodes are located in specific zones, which are subdivisions within a region.
Launch the Compute Engine and Cloud TPU resources required for this using the gcloud compute tpus execution-groups command.

Note: This tutorial uses TensorFlow 1.15.5 which is based on the Debian 10 image and defaults to Python 3.6. Earlier versions of TensorFlow 1.15.x were based on Debian 9 and default to Python 3.5.
```
$ gcloud compute tpus execution-groups create \
 --name=auto-speech-recog-tutorial \
 --zone=europe-west4-a \
 --tf-version=1.15.5 \
 --machine-type=n1-standard-8 \
 --disk-size=600 \
 --accelerator-type=v3-8
```
Command flag descriptions

name

The name of the Cloud TPU to create.

zone

The zone where you plan to create your Cloud TPU.

tf-version

The version of Tensorflow gcloud installs on the VM.

machine-type

The machine type of the Compute Engine VM to create.

disk-size-gb

The size of the hard disk in GB of the VM created by the gcloud command.

accelerator-type

The type of the Cloud TPU to create.

For more information on the gcloud command, see the gcloud Reference.
The configuration you specified appears. Enter y to approve or n to cancel.

When the gcloud command has finished executing, verify that your shell prompt has changed from username@project to username@vm-name. This change shows that you are now logged into your Compute Engine VM.

Note: If you are not connected to the Compute Engine instance, you can connect by running the following commands, replacing vm-name with your VM name. The VM name defaults to your username:
```
gcloud compute ssh auto-speech-recog-tutorial --zone=europe-west4-a
```

From this point on, a prefix of (vm)$ means you should run the command on the Compute Engine VM instance.

Create the following environment variables for directories:

(vm)$ STORAGE_BUCKET=gs://bucket-name

(vm)$ TPU_NAME=auto-speech-recog-tutorial
(vm)$ DATA_DIR=$STORAGE_BUCKET/data/
(vm)$ OUT_DIR=$STORAGE_BUCKET/output
(vm)$ export TMP_DIR=~/tmp

Generate the training and evaluation datasets

T2T conveniently packages data generation for many common open-source datasets in its t2t-datagen script. The script downloads the data, preprocesses it, and prepares it for training.

On your Compute Engine VM:

Use the t2t-datagen script to generate both the full dataset and the smaller clean version, which you will use for evaluation.

The audio import in t2t-datagen uses sox to generate normalized waveforms. Install it on your Compute Engine VM and then run the t2t-datagen commands that follow.
```
(vm)$  sudo apt-get install sox
```
```
(vm)$  t2t-datagen --problem=librispeech --data_dir=$DATA_DIR --tmp_dir=$TMP_DIR
(vm)$  t2t-datagen --problem=librispeech_clean --data_dir=$DATA_DIR --tmp_dir=$TMP_DIR
```

The problem librispeech_train_full_test_clean trains on the full dataset but evaluates on the clean dataset.

You can also use librispeech_clean_small which is a smaller version of the clean dataset.

You can view the data on Cloud Storage by going to the Google Cloud Console and choosing Storage from the left-hand menu. Click the name of the bucket that you created for this tutorial.

Training the model

To train a model on Cloud TPU run the trainer with big batches and truncated sequences.

(vm)$ t2t-trainer \
  --model=transformer \
  --hparams_set=transformer_librispeech_tpu \
  --problem=librispeech_train_full_test_clean \
  --train_steps=210000 \
  --eval_steps=3 \
  --local_eval_frequency=100 \
  --data_dir=$DATA_DIR \
  --output_dir=$OUT_DIR \
  --use_tpu \
  --cloud_tpu_name=$TPU_NAME

After this step is completed, run the training again for more steps with smaller batch size and full sequences. This training take approximately 11 hours on a v3-8 TPU node.

(vm)$ t2t-trainer \
  --model=transformer \
  --hparams_set=transformer_librispeech_tpu \
  --hparams=max_length=295650,max_input_seq_length=3650,max_target_seq_length=650,batch_size=6 \
  --problem=librispeech_train_full_test_clean \
  --train_steps=230000 \
  --eval_steps=3 \
  --local_eval_frequency=100 \
  --data_dir=$DATA_DIR \
  --output_dir=$OUT_DIR \
  --use_tpu \
  --cloud_tpu_name=$TPU_NAME

Cleaning up

To avoid incurring charges to your Google Cloud account for the resources used in this tutorial, either delete the project that contains the resources, or keep the project and delete the individual resources.

Disconnect from the Compute Engine VM:
```
(vm)$ exit
```
Your prompt should now be user@projectname, showing you are in the Cloud Shell.
In your Cloud Shell, use the gcloud compute tpus execution-groups command shown below to delete your Compute Engine VM and the Cloud TPU.
```
$ gcloud compute tpus execution-groups delete auto-speech-recog-tutorial \
  --zone=europe-west4-a
```
Verify the resources have been deleted by running gcloud compute tpus execution-groups list. The deletion might take several minutes. A response like the one below indicates your instances have been successfully deleted.
```
$ gcloud compute tpus execution-groups list \
  --zone=europe-west4-a
```
```
   NAME             STATUS
```
Delete your Cloud Storage bucket using gsutil as shown below. Replace bucket-name with the name of your Cloud Storage bucket.
```
$ gsutil rm -r gs://bucket-name
```

What's next

In this tutorial you have trained the Automated Speech Recognition model using a sample dataset. The results of this training are (in most cases) not usable for inference. To use a model for inference you can train the data on a publicly available dataset or your own data set. Models trained on Cloud TPUs require datasets to be in TFRecord format.

You can use the dataset conversion tool sample to convert an image classification dataset into TFRecord format. If you are not using an image classification model, you will have to convert your dataset to TFRecord format yourself. For more information, see TFRecord and tf.Example

Hyperparameter tuning

To improve the model's performance with your dataset, you can tune the model's hyperparameters. You can find information about hyperparameters common to all TPU supported models on GitHub. Information about model-specific hyperparameters can be found in the source code for each model. For more information on hyperparameter tuning, see Overview of hyperparameter tuning, Using the Hyperparameter tuning service and Tune hyperparameters.

Inference

Once you have trained your model you can use it for inference (also called prediction). AI Platform is a cloud-based solution for developing, training, and deploying machine learning models. Once a model is deployed, you can use the AI Platform Prediction service.

Explore more Tensor2Tensor models for TPU.
Experiment with more TPU samples.
Explore the TPU tools in TensorBoard.