Find and set maintenance windows

MySQL | PostgreSQL | SQL Server

This page has procedures for finding and setting maintenance windows for Cloud SQL instances. To learn more about how and why Cloud SQL performs maintenance, see the Overview of maintenance on Cloud SQL instances.

Before you begin

Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.

In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

Go to project selector

Make sure that billing is enabled for your Cloud project. Learn how to check if billing is enabled on a project.

Install and initialize the Google Cloud CLI.

In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

Go to project selector

Make sure that billing is enabled for your Cloud project. Learn how to check if billing is enabled on a project.

Install and initialize the Google Cloud CLI.

Set a preferred window for maintenance on an instance

Console

In the Google Cloud console, go to the Cloud SQL Instances page.

Go to Cloud SQL Instances
To open the Overview page of an instance, click the instance name.
In the Maintenance section, click Edit maintenance preferences.
In the Configuration options section, open Maintenance.
Configure the following options:
- Preferred window. Set the day and hour range when updates can occur on this instance.
- Order of update. Set the order for updating this instance, in relation to updates to other instances. Set timing to Any, Earlier, or Later. Instances using the Earlier setting receive updates up to a week before instances using the Later setting, when comparing instances that reside in the same location.

gcloud

Before using the gcloud command below, make the following replacements:

instance-id: Instance to reschedule
day: Day when you want maintenance to occur. Set to one of SUN, MON, TUE, WED, THU, FRI, SAT.
hour: Hour of day for maintenance window, in UTC time zone (0-23).

gcloud sql instances patch instance-id \
--maintenance-window-day=day \
--maintenance-window-hour=hour

For reference information, see gcloud sql instances patch.

Opt in to maintenance notifications

Even when you opt in to notifications, you do not receive them unless you set a preferred window for maintenance on an instance

Go to the Communication page.
Go to Communication
In the row for Cloud SQL, Maintenance window, select the radio button under Email to turn it ON.

Each user that needs to receive notifications must opt in separately.

Find maintenance notifications in the Google Cloud console

You can view maintenance notifications in a few places in the Google Cloud console:

On the ACTIVITY dashboard, look for instances marked with SQL Maintenance.
Go to Activity
When an instance is scheduled for maintenance, the date for maintenance is listed on the Instances page in the Maintenance column. The Maintenance column is usually hidden, but it displays automatically when maintenance is scheduled. You can also select Maintenance from the Column display options () if you want the Maintenance column to always show up.
Alternatively, you can select an instance to go to the Instance details page. If the instance is scheduled for maintenance, you will see a message in the Maintenance pane.
Go to Cloud SQL instances

Find scheduled maintenance windows using the API

gcloud

Before using the gcloud command below, make the following replacements

instance-id: The instance to reschedule

gcloud sql instances describe instance-id

Look for the scheduledMaintenance section in the response.

REST v1

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID

HTTP method and URL:

GET https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by executing gcloud init or gcloud auth login, or by using Cloud Shell, which automatically logs you into the gcloud CLI. You can check the currently active account by executing gcloud auth list.

Execute the following command:

curl -X GET \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id"

PowerShell (Windows)

Execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method GET `
    -Headers $headers `
    -Uri "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#instance",
  "state": "RUNNABLE",
  "databaseVersion": "POSTGRES_13"
}

Look for the scheduledMaintenance section in the response.

REST v1beta4

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID

HTTP method and URL:

GET https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Execute the following command:

curl -X GET \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id"

PowerShell (Windows)

Execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method GET `
    -Headers $headers `
    -Uri "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#instance",
  "state": "RUNNABLE",
  "databaseVersion": "POSTGRES_13"
}

Look for the scheduledMaintenance section in the response.

Reschedule planned maintenance

You may reschedule maintenance by using the Google Cloud console, gcloud, or the Cloud SQL Admin API.

Console

In the Google Cloud console, go to the Cloud SQL Instances page.

Go to Cloud SQL Instances
Filter for the term Maintenance to list all instances scheduled for maintenance.
In the Maintenance column, click Reschedule.
In the Reschedule dialog, choose whether to apply maintenance immediately, reschedule it to happen at a specific time within the 28 day deferral period, or defer to the next available maintenance window.

gcloud

Before using the gcloud command below, make the following replacements:

instance-id: The instance to reschedule
reschedule-type: Use one of IMMEDIATE, NEXT_AVAILABLE_WINDOW, or SPECIFIC_TIME.
If you choose NEXT_AVAILABLE_WINDOW, maintenance is rescheduled to the next available maintenance window following the current scheduled time.
reschedule-time: If you select SPECIFIC_TIME for reschedule-type, you also need to set this flag to specify the new day and time for maintenance to occur. Uses ISO 8601 format. For example, 2020-01-16T16:56:00.000Z

gcloud sql reschedule-maintenance instance-id \
--reschedule-type=reschedule-type \
[--schedule-time=reschedule-time]

For reference information, see gcloud sql reschedule-maintenance.

If you want to reschedule maintenance for up to 28 days, then check the version number of gcloud. If the version number is below 390.0.0_RC00, then reinstall gcloud.

REST v1

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID
reschedule-type: Use one of IMMEDIATE, NEXT_AVAILABLE_WINDOW, or SPECIFIC_TIME.
If you choose NEXT_AVAILABLE_WINDOW, maintenance is rescheduled to the next available maintenance window.

HTTP method and URL:

POST https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id/rescheduleMaintenance

Request JSON body:

{
  "reschedule": {
    "reschedule_type": "reschedule-type"
  }
}

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Save the request body in a file called request.json, and execute the following command:

curl -X POST \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json; charset=utf-8" \
    -d @request.json \
    "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id/rescheduleMaintenance
"

PowerShell (Windows)

Save the request body in a file called request.json, and execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id/rescheduleMaintenance
" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#operation",
  "targetLink": "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id",
  "status": "PENDING",
  "user": "user@example.com",
  "insertTime": "2020-01-16T02:32:12.281Z",
  "startTime": "08:00",
  "endTime": "08:01",
  "operationType": RESCHEDULE_MAINTENANCE,
  "name": "operation-id",
  "targetId": "instance-id",
  "selfLink": "https://sqladmin.googleapis.com/v1/projects/project-id/operations/operation-id",
  "targetProject": "project-id"
}

REST v1beta4

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID
reschedule-type: Use one of IMMEDIATE, NEXT_AVAILABLE_WINDOW, or SPECIFIC_TIME.
If you choose NEXT_AVAILABLE_WINDOW, maintenance is rescheduled to the next available maintenance window.

HTTP method and URL:

POST https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id/rescheduleMaintenance

Request JSON body:

{
  "reschedule": {
    "reschedule_type": "reschedule-type"
  }
}

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Save the request body in a file called request.json, and execute the following command:

curl -X POST \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json; charset=utf-8" \
    -d @request.json \
    "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id/rescheduleMaintenance
"

PowerShell (Windows)

Save the request body in a file called request.json, and execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id/rescheduleMaintenance
" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#operation",
  "targetLink": "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id",
  "status": "PENDING",
  "user": "user@example.com",
  "insertTime": "2020-01-16T02:32:12.281Z",
  "startTime": "08:00",
  "endTime": "08:01",
  "operationType": RESCHEDULE_MAINTENANCE,
  "name": "operation-id",
  "targetId": "instance-id",
  "selfLink": "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/operations/operation-id",
  "targetProject": "project-id"
}

To see how the underlying REST API request is constructed for this task, see the APIs Explorer on the instances:post page.

Configure a deny maintenance period

You can configure a maximum of one deny maintenance period on a Cloud SQL instance at any given time. The deny maintenance period takes precedence over any scheduled maintenance window. If there is a conflict between the timing of a maintenance window and the deny maintenance period, the deny maintenance period overrides the maintenance window.

You can manually remove a deny maintenance period, whether it has already occurred or not.

To configure a deny maintenance period, set its start date, end date, and the time of day the interval begins and ends. A deny maintenance period can span from one to 90 days.

For start date and end date, there are two formats:

yyyy-mm-dd: indicates a specific date
mm-dd: indicates a date recurring every year

The start date and end date are UTC. To set the timezone, use the time field to adjust start time. For example, start date = 2020-10-10 and time = 07:00:00 indicate the start time 2020-10-10 07:00:00 UTC (2020-10-10 00:00:00 PST)

For time, the format is: HH:mm:SS.

Hours are from 0 and 23 (inclusive).
Minutes and seconds are between 0 and 59 (inclusive).

Console

In the Google Cloud console, go to the Cloud SQL Instances page.

Go to Cloud SQL Instances
To open the Overview page of an instance, click the instance name.
In the Maintenance section, click Edit maintenance preferences.
In the Deny maintenance period section, set the start and end dates.
In the Advanced options section, optionally select Repeat every year.
Click Save.

gcloud

Before using the gcloud command below, make the following replacements:

instance-id: Cloud SQL instance id
start-date: Date when the interval begins. For example, 2021-11-29
end-date: Date when the interval ends. For example, 2021-12-02
time: Time of day for interval to start and end. For example, 00:00:00

gcloud sql instances patch instance-id\
 --deny-maintenance-period-start-date=start-date \
 --deny-maintenance-period-end-date=end-date \
 --deny-maintenance-period-time=time

REST v1

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID
start-date: The start date (yyyy-mm-dd) or (mm-dd) for annual recurrence
end-date: The end date (yyyy-mm-dd) or (mm-dd) for annual recurrence
time: The start and end time (HH:mm:SS)

HTTP method and URL:

POST https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id

Request JSON body:

{
  "settings":
  {
    "denyMaintenancePeriods": [{
      "start_date": "start-date",
      "end_date": "end-date"
      "time": "time"
    }]
  }
}

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Save the request body in a file called request.json, and execute the following command:

curl -X POST \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json; charset=utf-8" \
    -d @request.json \
    "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id"

PowerShell (Windows)

Save the request body in a file called request.json, and execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#operation",
  "targetLink": "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id",
  "status": "PENDING",
  "user": "user@example.com",
  "insertTime": "2020-01-16T02:32:12.281Z",
  "startTime": "08:00",
  "endTime": "08:01",
  "operationType": MAINTENANCE_DENY_PERIOD,
  "name": "operation-id",
  "targetId": "instance-id",
  "selfLink": "https://sqladmin.googleapis.com/v1/projects/project-id/operations/operation-id",
  "targetProject": "project-id"
}

REST v1beta4

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID
start-date: The start date (yyyy-mm-dd) or (mm-dd) for annual recurrence
end-date: The end date (yyyy-mm-dd) or (mm-dd) for annual recurrence
time: The start and end time (HH:mm:SS)

HTTP method and URL:

POST https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id

Request JSON body:

{
  "settings":
  {
    "denyMaintenancePeriods": [{
      "start_date": "start-date",
      "end_date": "end-date"
      "time": "time"
    }]
  }
}

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Save the request body in a file called request.json, and execute the following command:

curl -X POST \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json; charset=utf-8" \
    -d @request.json \
    "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id"

PowerShell (Windows)

Save the request body in a file called request.json, and execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#operation",
  "targetLink": "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id",
  "status": "PENDING",
  "user": "user@example.com",
  "insertTime": "2020-01-16T02:32:12.281Z",
  "startTime": "08:00",
  "endTime": "08:01",
  "operationType": MAINTENANCE_DENY_PERIOD,
  "name": "operation-id",
  "targetId": "instance-id",
  "selfLink": "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/operations/operation-id",
  "targetProject": "project-id"
}

Remove a deny maintenance period

Console

In the Google Cloud console, go to the Cloud SQL Instances page.

Go to Cloud SQL Instances
To open the Overview page of an instance, click the instance name.
In the Maintenance section, click Edit maintenance preferences.
In the Deny maintenance period section, click Clear.
Click Save.

gcloud

Before using the gcloud command below, make the following replacements:

instance-id: Cloud SQL instance id

gcloud sql instances patch instance-id \
--remove-deny-maintenance-period

REST v1

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID

HTTP method and URL:

POST https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id

Request JSON body:

{
  "settings":
  {
    "denyMaintenancePeriods": []
  }
}

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Save the request body in a file called request.json, and execute the following command:

curl -X POST \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json; charset=utf-8" \
    -d @request.json \
    "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id"

PowerShell (Windows)

Save the request body in a file called request.json, and execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#operation",
  "targetLink": "https://sqladmin.googleapis.com/v1/projects/project-id/instances/instance-id",
  "status": "PENDING",
  "user": "user@example.com",
  "insertTime": "2020-01-16T02:32:12.281Z",
  "startTime": "08:00",
  "endTime": "08:01",
  "operationType": MAINTENANCE_DENY_PERIOD,
  "name": "operation-id",
  "targetId": "instance-id",
  "selfLink": "https://sqladmin.googleapis.com/v1/projects/project-id/operations/operation-id",
  "targetProject": "project-id"
}

REST v1beta4

Before using any of the request data, make the following replacements:

project-id: The project ID
instance-id: The instance ID

HTTP method and URL:

POST https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id

Request JSON body:

{
  "settings":
  {
    "denyMaintenancePeriods": []
  }
}

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Save the request body in a file called request.json, and execute the following command:

curl -X POST \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json; charset=utf-8" \
    -d @request.json \
    "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id"

PowerShell (Windows)

Save the request body in a file called request.json, and execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "kind": "sql#operation",
  "targetLink": "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/instances/instance-id",
  "status": "PENDING",
  "user": "user@example.com",
  "insertTime": "2020-01-16T02:32:12.281Z",
  "startTime": "08:00",
  "endTime": "08:01",
  "operationType": MAINTENANCE_DENY_PERIOD,
  "name": "operation-id",
  "targetId": "instance-id",
  "selfLink": "https://sqladmin.googleapis.com/sql/v1beta4/projects/project-id/operations/operation-id",
  "targetProject": "project-id"
}

Deny maintenance period notifications

Maintenance Window notifications are not sent when the planned maintenance time falls within the deny maintenance period and are forbidden by maintenance deny period settings.

If you change instance deny maintenance period settings to forbid maintenance at the previously-scheduled time, maintenance period notifications are not sent.

Notifications of planned maintenance are sent during the deny maintenance period, as long as such maintenance is scheduled to occur outside of that period.

Find and set maintenance windows

Before you begin

Set a preferred window for maintenance on an instance

Console

gcloud

Opt in to maintenance notifications

Find maintenance notifications in the Google Cloud console

Find scheduled maintenance windows using the API

gcloud

REST v1

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

REST v1beta4

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

Reschedule planned maintenance

Console

gcloud

REST v1

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

REST v1beta4

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

Configure a deny maintenance period

Console

gcloud

REST v1

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

REST v1beta4

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

Remove a deny maintenance period

Console

gcloud

REST v1

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

REST v1beta4

curl (Linux, macOS, or Cloud Shell)

PowerShell (Windows)

Deny maintenance period notifications

What's next