Using Anthos Service Mesh egress gateways on GKE clusters: Tutorial

---

This tutorial shows how to use Anthos Service Mesh egress gateways and other Google Cloud controls to secure outbound traffic (egress) from workloads deployed on a Google Kubernetes Engine cluster. The tutorial is intended as a companion to the best practices guide.

The intended audience for this tutorial includes network, platform, and security engineers who administer Google Kubernetes Engine clusters used by one or more software delivery teams. The controls described here are especially useful for organizations that must demonstrate compliance with regulations—for example, GDPR and PCI.

Objectives

• Set up the infrastructure for running Anthos Service Mesh:
  • Custom VPC network and private subnet
  • Cloud NAT for internet access
  • Private GKE cluster with an extra node pool for egress gateway pods
  • Restrictive egress VPC firewall rules; only gateway nodes can reach external hosts
  • Private Google Access for connecting to Container Registry and Google APIs
• Install Anthos Service Mesh with egress gateways running on a dedicated node pool.
• Configure multi-tenant routing rules for external traffic through the egress gateway:
  • Applications in namespace 'team-x' can connect to example.com
  • Applications in namespace 'team-y' can connect to httpbin.org
• Use the Sidecar resource to restrict the scope of the sidecar proxy egress configuration for each namespace.
• Configure authorization policies to enforce egress rules.
• Configure the egress gateway to upgrade plain HTTP requests to TLS (TLS origination).
• Configure the egress gateway to pass-through TLS traffic.
• Set up Kubernetes network policies as an additional egress control.
• Configure direct access to Google APIs using Private Google Access and Identity and Access Management (IAM) permissions.

Costs

In this document, you use the following billable components of Google Cloud:

• Compute Engine
• Google Kubernetes Engine (GKE)
• Container Registry
• Anthos Service Mesh
• Cloud Load Balancing
• Cloud NAT
• Networking
• Cloud Storage

To generate a cost estimate based on your projected usage, use the pricing calculator. New Google Cloud users might be eligible for a free trial.

When you finish this tutorial, you can avoid ongoing costs by deleting the resources you created. For more information, see Cleaning up.

Before you begin

1. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

   Note: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.

   Go to project selector

2. Make sure that billing is enabled for your Google Cloud project.

3. In the Google Cloud console, activate Cloud Shell.

   Activate Cloud Shell

4. Create a working directory to use while following the tutorial:

   mkdir -p ~/WORKING_DIRECTORY
   cd ~/WORKING_DIRECTORY
   

5. Create a shell script to initialize your environment for the tutorial. Replace and edit the variables according to your project and preferences. Run this script with the source command to reinitialize your environment if your shell session expires:

   cat << 'EOF' > ./init-egress-tutorial.sh
   #! /usr/bin/env bash
   PROJECT_ID=YOUR_PROJECT_ID
   REGION=REGION
   ZONE=ZONE
   
   gcloud config set project ${PROJECT_ID}
   gcloud config set compute/region ${REGION}
   gcloud config set compute/zone ${ZONE}
   
   EOF
   

6. Make the script executable and run it with the source command to initialize your environment:

   chmod +x ./init-egress-tutorial.sh
   source ./init-egress-tutorial.sh
   

7. Set the required Identity and Access Management (IAM) roles. If you are a Project Owner, you have all the necessary permissions to complete the installation. If you aren't a Project Owner, ask your administrator to grant you the following IAM roles. In the following command, change PROJECT_EMAIL_ADDRESS to the account that you use to log in to Google Cloud.

   gcloud projects add-iam-policy-binding ${PROJECT_ID} \
       --member user:PROJECT_EMAIL_ADDRESS \
       --role=roles/editor \
       --role=roles/compute.admin \
       --role=roles/container.admin \
       --role=roles/resourcemanager.projectIamAdmin \
       --role=roles/iam.serviceAccountAdmin \
       --role=roles/iam.serviceAccountKeyAdmin \
       --role=roles/gkehub.admin \
       --role=roles/serviceusage.serviceUsageAdmin
   

8. Enable the APIs needed for the tutorial:

   gcloud services enable \
       dns.googleapis.com \
       container.googleapis.com \
       compute.googleapis.com \
       monitoring.googleapis.com \
       logging.googleapis.com \
       cloudtrace.googleapis.com \
       meshca.googleapis.com \
       meshtelemetry.googleapis.com \
       meshconfig.googleapis.com \
       iamcredentials.googleapis.com \
       gkeconnect.googleapis.com \
       gkehub.googleapis.com \
       cloudresourcemanager.googleapis.com \
       stackdriver.googleapis.com
   

   Enabling the APIs can take a minute or more to complete. When the APIs are enabled, you see output similar to the following:

   Operation "operations/acf.601db672-88e6-4f98-8ceb-aa3b5725533c" finished
   successfully.
   

Setting up the infrastructure

Create a VPC network and subnet

1. Create a new VPC network:

   gcloud compute networks create vpc-network \
       --subnet-mode custom
   

2. Create a subnet for the cluster to run in with pre-assigned secondary IP address ranges for Pods and services. Private Google Access is enabled so that applications with only internal IP addresses can reach Google APIs and services:

   gcloud compute networks subnets create subnet-gke \
       --network vpc-network \
       --range 10.0.0.0/24 \
       --secondary-range pods=10.1.0.0/16,services=10.2.0.0/20 \
       --enable-private-ip-google-access
   

Configure Cloud NAT

Cloud NAT allows workloads without external IP addresses to connect to destinations on the internet and receive inbound responses from those destinations.

Note: Cloud Router and Cloud NAT are used only to configure NAT for external internet connectivity; however, they are not actually in the path of network traffic. NAT configuration is applied at the software defined networking layer.

1. Create a Cloud Router:

   gcloud compute routers create nat-router \
       --network vpc-network
   

2. Add a NAT configuration to the router:

   gcloud compute routers nats create nat-config \
       --router nat-router \
       --nat-all-subnet-ip-ranges \
       --auto-allocate-nat-external-ips
   

Create service accounts for each GKE node pool

Create two service accounts for use by the two GKE node pools. A separate service account is assigned to each node pool so that you can apply VPC firewall rules to specific nodes.

1. Create a service account for use by the nodes in the default node pool:

   gcloud iam service-accounts create sa-application-nodes \
       --description="SA for application nodes" \
       --display-name="sa-application-nodes"
   

2. Create a service account for use by the nodes in the gateway node pool:

   gcloud iam service-accounts create sa-gateway-nodes \
       --description="SA for gateway nodes" \
       --display-name="sa-gateway-nodes"
   

Grant permissions to the service accounts

Add a minimal set of IAM roles to the application and gateway service accounts. These roles are required for logging, monitoring, and pulling private container images from Container Registry.

    project_roles=(
        roles/logging.logWriter
        roles/monitoring.metricWriter
        roles/monitoring.viewer
        roles/storage.objectViewer
    )
    for role in "${project_roles[@]}"
    do
        gcloud projects add-iam-policy-binding ${PROJECT_ID} \
            --member="serviceAccount:sa-application-nodes@${PROJECT_ID}.iam.gserviceaccount.com" \
            --role="$role"
        gcloud projects add-iam-policy-binding ${PROJECT_ID} \
            --member="serviceAccount:sa-gateway-nodes@${PROJECT_ID}.iam.gserviceaccount.com" \
            --role="$role"
    done

Note: If workloads on your GKE cluster need access to other Google Cloud services, create workload-specific service accounts with the least privileges possible. Workload Identity allows IAM permissions to be assigned to specific workloads. Later, this tutorial explains how to configure IAM access so that a particular workload can read a file in a Cloud Storage bucket.

Creating the firewall rules

In the following steps, you apply a firewall rule to the VPC network so that, by default, all egress traffic is denied. Specific connectivity is required for the cluster to function and for gateway nodes to be able to reach destinations outside of the VPC. A minimal set of specific firewall rules overrides the default deny-all rule to allow the necessary connectivity.

1. Create a default (low priority) firewall rule to deny all egress from the VPC network:

   gcloud compute firewall-rules create global-deny-egress-all \
       --action DENY \
       --direction EGRESS \
       --rules all \
       --destination-ranges 0.0.0.0/0 \
       --network vpc-network \
       --priority 65535 \
       --description "Default rule to deny all egress from the network."
   

2. Create a rule to allow only those nodes with the gateway service account to reach the internet:

   gcloud compute firewall-rules create gateway-allow-egress-web \
       --action ALLOW \
       --direction EGRESS \
       --rules tcp:80,tcp:443 \
       --target-service-accounts sa-gateway-nodes@${PROJECT_ID}.iam.gserviceaccount.com \
       --network vpc-network \
       --priority 1000 \
       --description "Allow the nodes running the egress gateways to connect to the web"
   

3. Allow nodes to the reach the Kubernetes control plane:

   gcloud compute firewall-rules create allow-egress-to-api-server \
       --action ALLOW \
       --direction EGRESS \
       --rules tcp:443,tcp:10250 \
       --destination-ranges 10.5.0.0/28 \
       --network vpc-network \
       --priority 1000 \
       --description "Allow nodes to reach the Kubernetes API server."
   

4. Anthos Service Mesh uses webhooks when injecting sidecar proxies into workloads. Allow the GKE API server to call the webhooks exposed by the service mesh control plane running on the nodes:

   gcloud compute firewall-rules create allow-ingress-api-server-to-webhook \
       --action ALLOW \
       --direction INGRESS \
       --rules tcp:15017 \
       --source-ranges 10.5.0.0/28 \
       --network vpc-network \
       --priority 1000 \
       --description "Allow the API server to call the webhooks exposed by istiod discovery"
   

5. Allow egress connectivity between pods and services running on the cluster. Note that GKE automatically creates a corresponding ingress rule.

   gcloud compute firewall-rules create allow-egress-pods-and-services \
       --action ALLOW \
       --direction EGRESS \
       --rules all \
       --destination-ranges 10.1.0.0/16,10.2.0.0/20 \
       --network vpc-network \
       --priority 1000 \
       --description "Allow pods and services on nodes to reach each other"
   

6. A service called Calico provides NetworkPolicy API functionality for GKE. Allow connectivity for Calico within the subnet:

   gcloud compute firewall-rules create allow-egress-calico \
       --action ALLOW \
       --direction EGRESS \
       --rules tcp:5473 \
       --destination-ranges 10.0.0.0/24 \
       --network vpc-network \
       --priority 1000 \
       --description "Allow Calico Typha within the subnet"
   

7. The kubelet read-only port is needed for GKE to read node metrics. Allow access to it within the subnet:

   gcloud compute firewall-rules create allow-egress-kubelet-readonly \
       --action ALLOW \
       --direction EGRESS \
       --rules tcp:10255 \
       --destination-ranges 10.0.0.0/24 \
       --network vpc-network \
       --priority 1000 \
       --description "Allow access to the kubelet read-only port within the subnet"
   

8. Allow access to the reserved sets of IP addresses used by Private Google Access for serving Google APIs, Container Registry, and other services:

   gcloud compute firewall-rules create allow-egress-gcp-apis \
       --action ALLOW \
       --direction EGRESS \
       --rules tcp \
       --destination-ranges 199.36.153.8/30 \
       --network vpc-network \
       --priority 1000 \
       --description "Allow access to the VIPs used by Google Cloud APIs (Private Google Access)"
   

   Note: If you are using VPC Service Controls, use 199.36.153.8/30 instead. For more information, see the following section..

9. Allow the Google Cloud health checker service to access pods running in the cluster:

   gcloud compute firewall-rules create allow-ingress-gcp-health-checker \
       --action ALLOW \
       --direction INGRESS \
       --rules tcp:80,tcp:443 \
       --source-ranges 130.211.0.0/22,35.191.0.0/16,35.191.0.0/16,209.85.152.0/22,209.85.204.0/22 \
       --network vpc-network \
       --priority 1000 \
       --description "Allow workloads to respond to Google Cloud health checks"
   

Configuring private access to Google Cloud APIs

Private Google Access enables VMs and Pods that only have internal IP addresses to access Google APIs and services. Although Google APIs and services are served from external IPs, traffic from the nodes never leaves the Google network when using Private Google Access.

Private Google Access provides different options and VIPs for connecting to Google APIs and services. This tutorial uses private.googleapis.com and its corresponding VIP. If you use VPC Service Controls and want to block access to APIs that do not support VPC Service Controls, use restricted.googleapis.com and the 199.36.153.8/30 VIP.

Create a private DNS zone, a 'CNAME', and 'A' records so that nodes and workloads can connect to Google APIs and services using Private Google Access and the 'private.googleapis.com' hostname:

gcloud dns managed-zones create private-google-apis \
    --description "Private DNS zone for Google APIs" \
    --dns-name googleapis.com \
    --visibility private \
    --networks vpc-network

gcloud dns record-sets transaction start --zone private-google-apis

gcloud dns record-sets transaction add private.googleapis.com. \
    --name *.googleapis.com \
    --ttl 300 \
    --type CNAME \
    --zone private-google-apis

gcloud dns record-sets transaction add "199.36.153.8" \
"199.36.153.9" "199.36.153.10" "199.36.153.11" \
    --name private.googleapis.com \
    --ttl 300 \
    --type A \
    --zone private-google-apis

gcloud dns record-sets transaction execute --zone private-google-apis

Configuring private access to Container Registry

Create a private DNS zone, a 'CNAME' and an 'A' record so that nodes can connect to Container Registry using Private Google Access and the 'gcr.io' hostname:

gcloud dns managed-zones create private-gcr-io \
    --description "private zone for Container Registry" \
    --dns-name gcr.io \
    --visibility private \
    --networks vpc-network

gcloud dns record-sets transaction start --zone private-gcr-io

gcloud dns record-sets transaction add gcr.io. \
    --name *.gcr.io \
    --ttl 300 \
    --type CNAME \
    --zone private-gcr-io

gcloud dns record-sets transaction add "199.36.153.8" "199.36.153.9" "199.36.153.10" "199.36.153.11" \
    --name gcr.io \
    --ttl 300 \
    --type A \
    --zone private-gcr-io

gcloud dns record-sets transaction execute --zone private-gcr-io

Create a private GKE cluster

1. Find the external IP address of your Cloud Shell so that you can add it to the list of networks that are allowed to access your cluster's API server:

   SHELL_IP=$(dig TXT -4 +short @ns1.google.com o-o.myaddr.l.google.com)
   

   After a period of inactivity, the external IP address of your Cloud Shell VM can change. If that happens, you must update your cluster's list of authorized networks. Add the following command to your initialization script:

   cat << 'EOF' >> ./init-egress-tutorial.sh
   SHELL_IP=$(dig TXT -4 +short @ns1.google.com o-o.myaddr.l.google.com)
   gcloud container clusters update cluster1 \
       --enable-master-authorized-networks \
       --master-authorized-networks ${SHELL_IP//\"}/32
   EOF
   

2. Create a private GKE cluster:

   gcloud container clusters create cluster1 \
       --enable-ip-alias \
       --enable-private-nodes \
       --release-channel "regular" \
       --no-enable-basic-auth \
       --no-issue-client-certificate \
       --enable-master-authorized-networks \
       --master-authorized-networks ${SHELL_IP//\"}/32 \
       --master-ipv4-cidr 10.5.0.0/28 \
       --enable-network-policy \
       --service-account "sa-application-nodes@${PROJECT_ID}.iam.gserviceaccount.com" \
       --machine-type "e2-standard-4" \
       --num-nodes "4" \
       --network "vpc-network" \
       --subnetwork "subnet-gke" \
       --cluster-secondary-range-name "pods" \
       --services-secondary-range-name "services" \
       --workload-pool "${PROJECT_ID}.svc.id.goog" \
       --zone ${ZONE}
   

   It takes a few minutes for the cluster to be created. The cluster has private nodes with internal IP addresses. Pods and services are assigned IPs from the named secondary ranges that you defined when creating the VPC subnet.

   Anthos Service Mesh requires the cluster nodes to use a machine type that has at least 4 vCPUs. Google recommends that the cluster be subscribed to the "regular" release channel to help ensure that nodes are running a Kubernetes version that is supported by Anthos Service Mesh. For more information, see the Anthos Service Mesh installation guides.

   Workload Identity is enabled on the cluster. Anthos Service Mesh requires Workload Identity and is the recommended way to access Google APIs from GKE workloads.

3. Create a node pool called gateway. This node pool is where the egress gateway is deployed. The dedicated=gateway:NoSchedule taint is added to every node in the gateway node pool.

   gcloud container node-pools create "gateway" \
       --cluster "cluster1" \
       --machine-type "e2-standard-4" \
       --node-taints dedicated=gateway:NoSchedule \
       --service-account "sa-gateway-nodes@${PROJECT_ID}.iam.gserviceaccount.com" \
       --num-nodes "1"
   

   Kubernetes taints and tolerations help ensure that only egress gateway Pods run on nodes in the gateway node pool.

4. Download credentials so that you can connect to the cluster with kubectl:

   gcloud container clusters get-credentials cluster1
   

5. Verify that the gateway nodes have the correct taint:

   kubectl get nodes -l cloud.google.com/gke-nodepool=gateway -o yaml \
   -o=custom-columns='name:metadata.name,taints:spec.taints[?(@.key=="dedicated")]'
   

   The output is similar to the following:

   name                                 taints
   gke-cluster1-gateway-9d65b410-cffs   map[effect:NoSchedule key:dedicated value:gateway]
   

Installing and setting up Anthos Service Mesh

This tutorial uses optional features of Anthos Service Mesh. To learn about installing Anthos Service Mesh with a script read the installation guide in the documentation.

1. Create namespaces for the service mesh control plane and egress gateways to be deployed in:

   kubectl create ns istio-system
   kubectl create ns istio-egress
   

2. Label the istio-egress, istio-system, and kube-system namespaces:

   kubectl label ns istio-egress istio=egress istio-injection=disabled
   kubectl label ns istio-system istio=system
   kubectl label ns kube-system kube-system=true
   

   These labels are used later to apply Kubernetes NetworkPolicy. The istio-injection=disabled label prevents spurious warnings when running istioctl analyze.

3. Create a manifest file to customize the Anthos Service Mesh installation using the Istio OperatorAPI:

   cat << 'EOF' > ./asm-custom-install.yaml
   apiVersion: install.istio.io/v1alpha1
   kind: IstioOperator
   metadata:
     name: "egress-gateway"
   spec:
     meshConfig:
       accessLogFile: "/dev/stdout"
     components:
       egressGateways:
         - name: "istio-egressgateway"
           enabled: true
           namespace: "istio-egress"
           label:
             istio: "egress"
           k8s:
             tolerations:
             - key: "dedicated"
               operator: "Equal"
               value: "gateway"
             nodeSelector:
               cloud.google.com/gke-nodepool: "gateway"
   EOF
   

   This file is supplied as an argument to the installation script and specifies the following configuration:

   • An egress gateway deployment running in the istio-egress namespace with a toleration and nodeSelector so it only runs on gateway nodes.
   • Access logging to 'stdout' for all sidecar proxies.
   Caution: Make sure that only network administrators can apply the gateway toleration to pods. Unauthorized use of the gateway toleration allows deployed pods to impersonate the gateway and run on gateway nodes. Pods running on gateway nodes can connect directly to external hosts. Restrict use of the gateway toleration as part of deployment pipelines or by using Kubernetes admission control. An GKE Enterprise Policy Controller constraint can be used in both scenarios.

4. Download the installation script:

   curl -O https://storage.googleapis.com/csm-artifacts/asm/install_asm
   

5. Download the SHA-256 signature of the file to the working directory:

   curl -O https://storage.googleapis.com/csm-artifacts/asm/install_asm.sha256
   

6. Verify the download with both files in the same directory:

   sha256sum -c --ignore-missing install_asm.sha256
   

   If the verification is successful, the output is:

   install_asm: OK
   

   For compatibility, the install_asm.sha256 file includes the checksum twice to allow any version of the script to be renamed to install_asm. If you get an error that --ignore-missing does not exist, rerun the previous command without the --ignore-missing flag.

7. Make the script executable:

   chmod +x install_asm
   

8. Install Anthos Service Mesh by running the script:

   ./install_asm \
       --mode install \
       --project_id ${PROJECT_ID} \
       --cluster_name cluster1 \
       --cluster_location ${ZONE} \
       --custom_overlay ./asm-custom-install.yaml \
       --output_dir ./ \
       --enable_all
   

9. When the script completes, set an environment variable to hold the path to the istioctl tool and add it to your initialization script:

   ISTIOCTL=$(find "$(pwd -P)" -name istioctl)
   echo "ISTIOCTL=\"${ISTIOCTL}\"" >> ./init-egress-tutorial.sh
   

Verifying the Anthos Service Mesh installation

1. Check that the Anthos Service Mesh control plane components are running in the istio-system namespace:

   kubectl get pod -n istio-system
   

   You see istio-ingressgateway and istiod-asm pods running.

2. Check that the egress gateway pods are running in the istio-egress namespace and on nodes in the gateway node pool:

   kubectl get pods -n istio-egress -o wide
   

3. The egress gateway pods have a nodeSelector to select nodes in the gateway node pool and a toleration that lets them run on the tainted gateway nodes. Examine the nodeSelector and tolerations for the egress gateway pods:

   kubectl -n istio-egress get pod -l app=istio-egressgateway \
       -o=custom-columns='name:metadata.name,nodeSelector:spec.nodeSelector,\
       tolerations:spec.tolerations[?(@.key=="dedicated")]'
   

   The output is similar to the following:

   name                                   nodeSelector                                 tolerations
   istio-egressgateway-74687946f5-dg9mp   map[cloud.google.com/gke-nodepool:gateway]   map[key:dedicated operator:Equal value:gateway]
   

Preparing the mesh and a test application

1. Make sure that STRICT mutual TLS is enabled. Apply a default PeerAuthentication policy for the mesh in the istio-system namespace:

   cat <<EOF | kubectl apply -f -
   apiVersion: "security.istio.io/v1beta1"
   kind: "PeerAuthentication"
   metadata:
     name: "default"
     namespace: "istio-system"
   spec:
     mtls:
       mode: STRICT
   EOF
   

   You can override this configuration by creating PeerAuthentication resources in specific namespaces.

2. Create namespaces to use for deploying test workloads. Later steps in this tutorial explain how to configure different egress routing rules for each namespace.

   kubectl create namespace team-x
   kubectl create namespace team-y
   

3. Label the namespaces so that they can be selected by Kubernetes network policies:

   kubectl label namespace team-x team=x
   kubectl label namespace team-y team=y
   

4. For Anthos Service Mesh to automatically inject proxy sidecars, you must set a revision label on the workload namespaces. The revision label must match the revision of the Anthos Service Mesh control plane that has been deployed to your cluster. Look up the revision label on the istiod pod and store it in an environment variable:

   REVISION_LABEL=$(kubectl get pod -n istio-system -l app=istiod \
     -o jsonpath='{.items[0].metadata.labels.istio\.io/rev}')
   

5. Set the revision label on the team-x and team-y namespaces:

   kubectl label ns team-x istio.io/rev=${REVISION_LABEL}
   kubectl label ns team-y istio.io/rev=${REVISION_LABEL}
   

6. Create a YAML file to use for making test deployments:

   cat << 'EOF' > ./test.yaml
   apiVersion: v1
   kind: ServiceAccount
   metadata:
     name: test
   ---
   apiVersion: v1
   kind: Service
   metadata:
     name: test
     labels:
       app: test
   spec:
     ports:
     - port: 80
       name: http
     selector:
       app: test
   ---
   apiVersion: apps/v1
   kind: Deployment
   metadata:
     name: test
   spec:
     replicas: 1
     selector:
       matchLabels:
         app: test
     template:
       metadata:
         labels:
           app: test
       spec:
         serviceAccountName: test
         containers:
         - name: test
           image: gcr.io/google.com/cloudsdktool/cloud-sdk:slim
           command: ["/bin/sleep", "infinity"]
           imagePullPolicy: IfNotPresent
   EOF
   

7. Deploy the test application to the team-x namespace:

   kubectl -n team-x create -f ./test.yaml
   

8. Verify that the test application is deployed to a node in the default pool and that a proxy sidecar container is injected. Repeat the following command until the pod's status is Running:

   kubectl -n team-x get po -l app=test -o wide
   

   The output is similar to the following:

   NAME                   READY   STATUS    RESTARTS   AGE   IP          NODE                                      NOMINATED NODE   READINESS GATES
   test-d5bdf6f4f-9nxfv   2/2     Running   0          19h   10.1.1.25   gke-cluster1-default-pool-f6c7a51f-wbzj
   

   2 out of 2 containers are Running. One container is the test application and the other is the proxy sidecar.

   The Pod is running on a node in the default node pool.

9. Verify that it is not possible to make an HTTP request from the test container to an external site:

   kubectl -n team-x exec -it \
       $(kubectl -n team-x get pod -l app=test -o jsonpath={.items..metadata.name}) \
       -c test -- curl -v http://example.com
   

   An error message from the sidecar proxy is generated because the 'global-deny-egress-all' firewall rule denies the upstream connection.

Using the Sidecar resource to restrict the scope of sidecar proxy configuration

You can use the Sidecar resource to restrict the scope of the egress listener that is configured for sidecar proxies. To reduce configuration bloat and memory usage, it's a good practice to apply a default Sidecar resource for every namespace.

The proxy that Anthos Service Mesh runs in the sidecar is Envoy. In Envoy terminology, a cluster is a logically similar group of upstream endpoints used as destinations for load balancing.

1. Inspect the outbound clusters configured in the Envoy sidecar proxy for the test pod by running the istioctl proxy-config command:

   ${ISTIOCTL} pc c $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}).team-x --direction outbound
   

   There are approximately 20 Envoy clusters in the list, including several for the egress gateway.

2. Restrict the proxy configuration to egress routes that have been explicitly defined with service entries in the istio-egress and team-x namespaces. Apply a Sidecar resource to the team-x namespace:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: Sidecar
   metadata:
     name: default
     namespace: team-x
   spec:
     outboundTrafficPolicy:
       mode: REGISTRY_ONLY
     egress:
     - hosts:
       - 'istio-egress/*'
       - 'team-x/*'
   EOF
   

   Setting outbound traffic policy mode to REGISTRY_ONLY restricts the proxy configuration to include only those external hosts that have been explicitly added to the mesh's service registry by defining service entries.

   The 'istio-egress/*' part specifies that the sidecar proxy select routes from the istio-egress namespace that are made available by using the exportTo attribute. The 'team-x/*' part includes any routes that have been configured locally in the team-x namespace.

3. View the outbound clusters configured in the Envoy sidecar proxy, and compare them to the list of clusters that were configured before applying the Sidecar resource:

   ${ISTIOCTL} pc c $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}).team-x --direction outbound
   

   The output includes only a few clusters for the egress gateway and one for the test pod itself.

Configuring Anthos Service Mesh to route traffic through the egress gateway

1. Configure a Gateway for HTTP traffic on port 80. The Gateway selects theistio-egressgateway proxy that the installer deployed to the istio-egress namespace. The Gateway configuration is applied to the istio-egress namespace and handles traffic for any host.

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: Gateway
   metadata:
     name: egress-gateway
     namespace: istio-egress
   spec:
     selector:
       istio: egress
     servers:
     - port:
         number: 80
         name: https
         protocol: HTTPS
       hosts:
         - '*'
       tls:
         mode: ISTIO_MUTUAL
   EOF
   

2. Create a DestinationRule for the egress gateway with mutual TLS for authentication and encryption. Use a single shared destination rule for all external hosts.

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: DestinationRule
   metadata:
     name: target-egress-gateway
     namespace: istio-egress
   spec:
     host: istio-egressgateway.istio-egress.svc.cluster.local
     subsets:
     - name: target-egress-gateway-mTLS
       trafficPolicy:
         loadBalancer:
           simple: ROUND_ROBIN
         tls:
           mode: ISTIO_MUTUAL
   EOF
   

3. Create a ServiceEntry in the istio-egress namespace to explicitly register example.com in the mesh's service registry for the team-x namespace:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: ServiceEntry
   metadata:
     name: example-com-ext
     namespace: istio-egress
   spec:
     hosts:
     - example.com
     ports:
     - number: 80
       name: http
       protocol: HTTP
     - number: 443
       name: tls
       protocol: TLS
     resolution: DNS
     location: MESH_EXTERNAL
     exportTo:
     - 'team-x'
     - 'istio-egress'
   EOF
   

   Configuring different egress routing for each namespace

   The `exportTo` property controls which namespaces can use the service entry. Network administrators use service entries to centrally control the set of external hosts available to each namespace. Configure Kubernetes RBAC permissions so that only network administrators can directly create and modify service entries. Consider creating automation with an approval workflow so that application developers can request access to new external hosts.

4. Create a VirtualService to route traffic to example.com through the egress gateway. There are two match conditions: the first condition directs traffic to the egress gateway, and the second directs traffic from the egress gateway to the destination host. The exportTo property controls which namespaces can use the virtual service.

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: VirtualService
   metadata:
     name: example-com-through-egress-gateway
     namespace: istio-egress
   spec:
     hosts:
     - example.com
     gateways:
     - istio-egress/egress-gateway
     - mesh
     http:
     - match:
       - gateways:
         - mesh
         port: 80
       route:
       - destination:
           host: istio-egressgateway.istio-egress.svc.cluster.local
           subset: target-egress-gateway-mTLS
           port:
             number: 80
         weight: 100
     - match:
       - gateways:
         - istio-egress/egress-gateway
         port: 80
       route:
       - destination:
           host: example.com
           port:
             number: 80
         weight: 100
     exportTo:
     - 'istio-egress'
     - 'team-x'
   EOF
   

5. Run istioctl analyze to check for configuration errors:

   ${ISTIOCTL} analyze -n istio-egress
   

   The output is similar to the following:

   ✔ No validation issues found when analyzing namespace: istio-egress.
   

6. Send several requests through the egress gateway to the external site:

   for i in {1..4}
   do
       kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
           -o jsonpath={.items..metadata.name}) -c test -- \
       curl -s -o /dev/null -w "%{http_code}\n" http://example.com
   done
   

   You see 200 status codes for all four responses.

7. Verify that the requests were directed through the egress gateway by checking the proxy access logs. First check the access log for the proxy sidecar deployed with the test application:

   kubectl -n team-x logs -f $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}) istio-proxy
   

   For each request you send, you see a log entry similar to the following:

   [2020-09-14T17:37:08.045Z] "HEAD / HTTP/1.1" 200 - "-" "-" 0 0 5 4 "-" "curl/7.67.0" "d57ea5ad-90e9-46d9-8b55-8e6e404a8f9b" "example.com" "10.1.4.12:8080" outbound|80||istio-egressgateway.istio-egress.svc.cluster.local 10.1.0.17:42140 93.184.216.34:80 10.1.0.17:60326 - -
   

8. Also check the egress gateway access log:

   kubectl -n istio-egress logs -f $(kubectl -n istio-egress get pod -l istio=egress \
       -o jsonpath="{.items[0].metadata.name}") istio-proxy
   

   For each request you send, you see an egress gateway access log entry similar to the following:

   [2020-09-14T17:37:08.045Z] "HEAD / HTTP/2" 200 - "-" "-" 0 0 4 3 "10.1.0.17" "curl/7.67.0" "095711e6-64ef-4de0-983e-59158e3c55e7" "example.com" "93.184.216.34:80" outbound|80||example.com 10.1.4.12:37636 10.1.4.12:8080 10.1.0.17:44404 outbound_.80_.target-egress-gateway-mTLS_.istio-egressgateway.istio-egress.svc.cluster.local -
   

Configure different routing for a second namespace

Configure routing for a second external host to learn how different external connectivity can be configured for different teams.

1. Create a Sidecar resource for the team-y namespace:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: Sidecar
   metadata:
     name: default
     namespace: team-y
   spec:
     outboundTrafficPolicy:
       mode: REGISTRY_ONLY
     egress:
     - hosts:
       - 'istio-egress/*'
       - 'team-y/*'
   EOF
   

2. Deploy the test application to the team-y namespace:

   kubectl -n team-y create -f ./test.yaml
   

3. Register a second external host and export it to the team-x and the team-y namespace:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: ServiceEntry
   metadata:
     name: httpbin-org-ext
     namespace: istio-egress
   spec:
     hosts:
     - httpbin.org
     ports:
     - number: 80
       name: http
       protocol: HTTP
     - number: 443
       name: tls
       protocol: TLS
     resolution: DNS
     location: MESH_EXTERNAL
     exportTo:
     - 'istio-egress'
     - 'team-x'
     - 'team-y'
   EOF
   

4. Create a virtual service to route traffic to httpbin.org through the egress gateway:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: VirtualService
   metadata:
     name: httpbin-org-through-egress-gateway
     namespace: istio-egress
   spec:
     hosts:
     - httpbin.org
     gateways:
     - istio-egress/egress-gateway
     - mesh
     http:
     - match:
       - gateways:
         - mesh
         port: 80
       route:
       - destination:
           host: istio-egressgateway.istio-egress.svc.cluster.local
           subset: target-egress-gateway-mTLS
           port:
             number: 80
         weight: 100
     - match:
       - gateways:
         - istio-egress/egress-gateway
         port: 80
       route:
       - destination:
           host: httpbin.org
           port:
             number: 80
         weight: 100
     exportTo:
     - 'istio-egress'
     - 'team-x'
     - 'team-y'
   EOF
   

5. Run istioctl analyze to check for configuration errors:

   ${ISTIOCTL} analyze -n istio-egress
   

   You see:

   ✔ No validation issues found when analyzing namespace: istio-egress.
   

6. Make a request to httpbin.org from the team-y test app:

   kubectl -n team-y exec -it $(kubectl -n team-y get pod -l app=test -o \
       jsonpath={.items..metadata.name}) -c test -- curl -I http://httpbin.org
   

   You see a 200 OK response.

7. Also make a request to httpbin.org from the team-x test app:

   kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl -I http://httpbin.org
   

   You see a 200 OK response.

8. Attempt to make a request to example.com from the team-y namespace:

   kubectl -n team-y exec -it $(kubectl -n team-y get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl -I http://example.com
   

   The request fails because there is no outbound route configured for the example.com host.

Using Authorization Policy to provide additional control over traffic

In this tutorial, authorization policies for the egress gateway are created in the istio-egressnamespace. You can configure Kubernetes RBAC so that only network administrators can access the istio-egress namespace.

1. Create an AuthorizationPolicy so that applications in the team-x namespace can connect to example.com but not to other external hosts when sending requests using port 80. The corresponding targetPort on the egress gateway pods is 8080.

   cat <<EOF | kubectl apply -f -
   apiVersion: security.istio.io/v1beta1
   kind: AuthorizationPolicy
   metadata:
     name: egress-team-x-to-example-com
     namespace: istio-egress
   spec:
     rules:
       - from:
         - source:
             namespaces:
             - 'team-x'
         to:
         - operation:
             hosts:
               - 'example.com'
         when:
         - key: destination.port
           values: ["8080"]
   EOF
   

2. Verify that you can make a request to example.com from the test application in the team-x namespace:

   kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl -I http://example.com
   

   You see a 200 OK response.

3. Try to make a request to httpbin.org from the test application in the team-x namespace:

   kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl -s -w " %{http_code}\n" \
       http://httpbin.org
   

   The request fails with an RBAC: access denied message and a 403 Forbidden status code. You may need to wait a few seconds because there is often a short delay before authorization policy takes effect.

4. Authorization policies provide rich control over which traffic is allowed or denied. Apply the following authorization policy to allow the test app in the team-y namespace to make requests to httpbin.org by using one particular URL path when sending requests using port 80. The corresponding targetPort on the egress gateway pods is 8080.

   cat <<EOF | kubectl apply -f -
   apiVersion: security.istio.io/v1beta1
   kind: AuthorizationPolicy
   metadata:
     name: egress-team-y-to-httpbin-teapot
     namespace: istio-egress
   spec:
     rules:
       - from:
         - source:
             namespaces:
             - 'team-y'
         to:
         - operation:
             hosts:
             - httpbin.org
             paths: ['/status/418']
         when:
         - key: destination.port
           values: ["8080"]
   EOF
   

5. Attempt to connect to httpbin.org from the test app in the team-y namespace:

   kubectl -n team-y exec -it $(kubectl -n team-y get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl -s -w " %{http_code}\n" \
       http://httpbin.org
   

   The request fails with an RBAC: access denied message and a 403 Forbidden status code.

6. Now make a request to httpbin.org/status/418 from the same app:

   kubectl -n team-y exec -it $(kubectl -n team-y get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl http://httpbin.org/status/418
   

   The request succeeds because the path matches the pattern in the authorization policy. The output is similar to the following:

      -=[ teapot ]=-
         _...._
       .'  _ _ `.
      | ."` ^ `". _,
      \_;`"---"`|//
        |       ;/
        \_     _/
          `"""`
   

TLS origination at the egress gateway

You can configure egress gateways to 'upgrade' (originate) plain HTTP requests to TLS. Allowing applications to make plain HTTP requests has several advantages when used with Istio mutual TLS and TLS origination. For more information, see the best practices guide.

1. Create a DestinationRule. The DestinationRule specifies that the gateway originate a TLS connection to example.com.

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: DestinationRule
   metadata:
     name: example-com-originate-tls
     namespace: istio-egress
   spec:
     host: example.com
     subsets:
       - name: example-com-originate-TLS
         trafficPolicy:
           loadBalancer:
             simple: ROUND_ROBIN
           portLevelSettings:
           - port:
               number: 443
             tls:
               mode: SIMPLE
               sni: example.com
   EOF
   

2. Update the virtual service for example.com so that requests to port 80 on the gateway are 'upgraded' to TLS on port 443 when they are sent to the destination host:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1alpha3
   kind: VirtualService
   metadata:
     name: example-com-through-egress-gateway
     namespace: istio-egress
   spec:
     hosts:
     - example.com
     gateways:
     - mesh
     - istio-egress/egress-gateway
     http:
     - match:
       - gateways:
         - mesh
         port: 80
       route:
       - destination:
           host: istio-egressgateway.istio-egress.svc.cluster.local
           subset: target-egress-gateway-mTLS
           port:
             number: 80
     - match:
       - gateways:
         - istio-egress/egress-gateway
         port: 80
       route:
       - destination:
           host: example.com
           port:
             number: 443
           subset: example-com-originate-TLS
         weight: 100
   EOF
   

3. Make several requests to example.com from the test app in the team-x namespace:

   for i in {1..4}
   do
       kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
           -o jsonpath={.items..metadata.name}) -c test -- curl -I http://example.com
   done
   

   As before, the requests succeed with 200 OK responses.

4. Check the egress gateway log to verify that the gateway routed the requests to the destination host by originating TLS connections:

   kubectl -n istio-egress logs -f $(kubectl -n istio-egress get pod -l istio=egress \
       -o jsonpath="    {.items[0].metadata.name}") istio-proxy
   

   The output is similar to the following:

   [2020-09-24T17:58:02.548Z] "HEAD / HTTP/2" 200 - "-" "-" 0 0 6 5 "10.1.1.15" "curl/7.67.0" "83a77acb-d994-424d-83da-dd8eac902dc8" "example.com" "93.184.216.34:443" outbound|443|example-com-originate-TLS|example.com 10.1.4.31:49866 10.1.4.31:8080 10.1.1.15:37334 outbound_.80_.target-egress-gateway-mTLS_.istio-egressgateway.istio-egress.svc.cluster.local -
   

   The proxy sidecar sent the request to the gateway using port 80 and TLS originated on port 443 to send the request to the destination host.

Pass-through of HTTPS/TLS connections

Your existing applications might already be using TLS connections when communicating with external services. You can configure the egress gateway to pass TLS connections through without decrypting them.

Caution: The gateway treats the encrypted pass-through TLS connection as a TCP connection and can not read any HTTP related attributes or any signed and trusted metadata. You can't use authorization policies to allow or deny pass-through traffic based on attributes of the request. The next steps of this tutorial create an extra authorization policy to allow any traffic that is sent to the egress gateway on port 443. That traffic can be unencrypted, and the policy doesn't restrict connections based on particular sources and destinations inside or outside of the mesh. If you need to apply authorization policy, we recommend that you avoid TLS pass-through.

1. Modify your configuration so that the egress gateway uses TLS pass-through for connections to port 443:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: Gateway
   metadata:
     name: egress-gateway
     namespace: istio-egress
   spec:
     selector:
       istio: egress
     servers:
     - port:
         number: 80
         name: https
         protocol: HTTPS
       hosts:
         - '*'
       tls:
         mode: ISTIO_MUTUAL
     - port:
         number: 443
         name: tls
         protocol: TLS
       hosts:
       - '*'
       tls:
         mode: PASSTHROUGH
   EOF
   

2. Update the DestinationRule pointing to the egress gateway to add a second subset for port 443 on the gateway. This new subset doesn't use mutual TLS. Istio mutual TLS is not supported for pass-through of TLS connections. Connections on port 80 still use mTLS:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1alpha3
   kind: DestinationRule
   metadata:
     name: target-egress-gateway
     namespace: istio-egress
   spec:
     host: istio-egressgateway.istio-egress.svc.cluster.local
     subsets:
     - name: target-egress-gateway-mTLS
       trafficPolicy:
         loadBalancer:
           simple: ROUND_ROBIN
         portLevelSettings:
         - port:
             number: 80
           tls:
             mode: ISTIO_MUTUAL
     - name: target-egress-gateway-TLS-passthrough
   EOF
   

3. Update the virtual service for example.com so that TLS traffic on port 443 is passed through the gateway:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1alpha3
   kind: VirtualService
   metadata:
     name: example-com-through-egress-gateway
     namespace: istio-egress
   spec:
     hosts:
     - example.com
     gateways:
     - mesh
     - istio-egress/egress-gateway
     http:
     - match:
       - gateways:
         - mesh
         port: 80
       route:
       - destination:
           host: istio-egressgateway.istio-egress.svc.cluster.local
           subset: target-egress-gateway-mTLS
           port:
             number: 80
     - match:
       - gateways:
         - istio-egress/egress-gateway
         port: 80
       route:
       - destination:
           host: example.com
           port:
             number: 443
           subset: example-com-originate-TLS
         weight: 100
     tls:
     - match:
       - gateways:
         - mesh
         port: 443
         sniHosts:
         - example.com
       route:
       - destination:
           host: istio-egressgateway.istio-egress.svc.cluster.local
           subset: target-egress-gateway-TLS-passthrough
           port:
             number: 443
     - match:
       - gateways:
         - istio-egress/egress-gateway
         port: 443
         sniHosts:
         - example.com
       route:
       - destination:
           host: example.com
           port:
             number: 443
         weight: 100
     exportTo:
     - 'istio-egress'
     - 'team-x'
   EOF
   

4. Update the virtual service for httpbin.org so that TLS traffic on port 443 is passed through the gateway:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: VirtualService
   metadata:
     name: httpbin-org-through-egress-gateway
     namespace: istio-egress
   spec:
     hosts:
     - httpbin.org
     gateways:
     - istio-egress/egress-gateway
     - mesh
     http:
     - match:
       - gateways:
         - mesh
         port: 80
       route:
       - destination:
           host: istio-egressgateway.istio-egress.svc.cluster.local
           subset: target-egress-gateway-mTLS
           port:
             number: 80
         weight: 100
     - match:
       - gateways:
         - istio-egress/egress-gateway
         port: 80
       route:
       - destination:
           host: httpbin.org
           port:
             number: 80
         weight: 100
     tls:
     - match:
       - gateways:
         - mesh
         port: 443
         sniHosts:
         - httpbin.org
       route:
       - destination:
           host: istio-egressgateway.istio-egress.svc.cluster.local
           subset: target-egress-gateway-TLS-passthrough
           port:
             number: 443
     - match:
       - gateways:
         - istio-egress/egress-gateway
         port: 443
         sniHosts:
         - httpbin.org
       route:
       - destination:
           host: httpbin.org
           port:
             number: 443
         weight: 100
     exportTo:
     - 'istio-egress'
     - 'team-x'
     - 'team-y'
   EOF
   

5. Add an authorization policy that accepts any kind of traffic sent to port 443 of the egress gateway service. The corresponding targetPort on the gateway pods is 8443.

   cat <<EOF | kubectl apply -f -
   apiVersion: security.istio.io/v1beta1
   kind: AuthorizationPolicy
   metadata:
     name: egress-all-443
     namespace: istio-egress
   spec:
     rules:
       - when:
         - key: destination.port
           values: ["8443"]
   EOF
   

6. Run istioctl analyze to check for configuration errors:

   ${ISTIOCTL} analyze -n istio-egress
   

   You see:

   ✔ No validation issues found when analyzing namespace: istio-egress.
   

7. Make a plain HTTP request to example.com from the test application in the team-xnamespace:

   kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl -I http://example.com
   

   The request succeeds with a 200 OK response.

8. Now make several TLS (HTTPS) requests from the test application in the team-x namespace:

   for i in {1..4}
   do
       kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
           -o jsonpath={.items..metadata.name}) -c test -- curl -s -o /dev/null \
           -w "%{http_code}\n" \
           https://example.com
   done
   

   You see 200 responses.

9. Look at the egress gateway log again:

   kubectl -n istio-egress logs -f $(kubectl -n istio-egress get pod -l istio=egress \
       -o jsonpath="{.items[0].metadata.name}") istio-proxy
   

   You see log entries similar to the following:

   [2020-09-24T18:04:38.608Z] "- - -" 0 - "-" "-" 1363 5539 10 - "-" "-" "-" "-" "93.184.216.34:443" outbound|443||example.com 10.1.4.31:51098 10.1.4.31:8443 10.1.1.15:57030 example.com -
   

   The HTTPS request has been treated as TCP traffic and passed through the gateway to the destination host, so no HTTP information is included in the log.

Using Kubernetes NetworkPolicy as an additional control

There are many scenarios in which an application can bypass a sidecar proxy. You can use Kubernetes NetworkPolicy to additionally specify which connections workloads are allowed to make. After a single network policy is applied, all connections that aren't specifically allowed are denied.

This tutorial only considers egress connections and egress selectors for network policies. If you control ingress with network policies on your own clusters, then you must create ingress policies to correspond to your egress policies. For example, if you allow egress from workloads in the team-x namespace to the team-y namespace, you must also allow ingress to the team-y namespace from the team-x namespace.

1. Allow workloads and proxies deployed in the team-x namespace to connect to istiod and the egress gateway:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.k8s.io/v1
   kind: NetworkPolicy
   metadata:
     name: allow-egress-to-control-plane
     namespace: team-x
   spec:
     podSelector: {}
     policyTypes:
       - Egress
     egress:
     - to:
       - namespaceSelector:
           matchLabels:
             istio: system
         podSelector:
           matchLabels:
             istio: istiod
       - namespaceSelector:
           matchLabels:
             istio: egress
         podSelector:
           matchLabels:
             istio: egress
   EOF
   

2. Allow workloads and proxies to query DNS:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.k8s.io/v1
   kind: NetworkPolicy
   metadata:
     name: allow-egress-to-dns
     namespace: team-x
   spec:
     podSelector: {}
     policyTypes:
       - Egress
     egress:
     - to:
       - namespaceSelector:
           matchLabels:
             kube-system: "true"
       ports:
       - port: 53
         protocol: UDP
       - port: 53
         protocol: TCP
   EOF
   

3. Allow workloads and proxies to connect to the IPs that serve Google APIs and services, including Mesh CA:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.k8s.io/v1
   kind: NetworkPolicy
   metadata:
     name: allow-egress-to-google-apis
     namespace: team-x
   spec:
     podSelector: {}
     policyTypes:
       - Egress
     egress:
     - to:
       - ipBlock:
           cidr: 199.36.153.4/30
       - ipBlock:
           cidr: 199.36.153.8/30
   EOF
   

4. Allow workloads and proxies to connect to the GKE metadata server:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.k8s.io/v1
   kind: NetworkPolicy
   metadata:
     name: allow-egress-to-metadata-server
     namespace: team-x
   spec:
     podSelector: {}
     policyTypes:
       - Egress
     egress:
     - to: # For GKE data plane v2
       - ipBlock:
           cidr: 169.254.169.254/32
     - to: # For GKE data plane v1
       - ipBlock:
           cidr: 127.0.0.1/32
       ports:
       - protocol: TCP
         port: 988
   EOF
   

5. Optional: Allow workloads and proxies in the team-x namespace to make connections to each other:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.k8s.io/v1
   kind: NetworkPolicy
   metadata:
     name: allow-egress-to-same-namespace
     namespace: team-x
   spec:
     podSelector: {}
     ingress:
       - from:
         - podSelector: {}
     egress:
       - to:
         - podSelector: {}
   EOF
   

6. Optional: Allow workloads and proxies in the team-x namespace to make connections to workloads deployed by a different team:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.k8s.io/v1
   kind: NetworkPolicy
   metadata:
     name: allow-egress-to-team-y
     namespace: team-x
   spec:
     podSelector: {}
     policyTypes:
       - Egress
     egress:
     - to:
       - namespaceSelector:
           matchLabels:
             team: 'y'
   EOF
   

7. Connections between sidecar proxies persist. Existing connections are not closed when you apply a new network policy. Restart the workloads in the team-x namespace to make sure existing connections are closed:

   kubectl -n team-x rollout restart deployment
   

8. Verify that you can still make an HTTP request to example.com from the test application in the team-xnamespace:

   kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- curl -I http://example.com
   

   The request succeeds with a 200 OK response.

Directly accessing Google APIs using Private Google Access and IAM permissions

Google's APIs and services are exposed using external IP addresses. When pods with VPC-native alias IP addresses make connections to Google APIs by using Private Google Access, the traffic never leaves Google's network.

When you set up the infrastructure for this tutorial, you enabled Private Google Access for the subnet used by GKE pods. To allow access to the IP addresses used by Private Google Access, you created a route, a VPC firewall rule, and a private DNS zone. This configuration lets pods reach Google APIs directly without sending traffic through the egress gateway. You can control which APIs are available to specific Kubernetes service accounts (and hence namespaces) by using Workload Identity and IAM. Istio authorization doesn't take effect because the egress gateway is not handling connections to the Google APIs.

Before pods can call Google APIs, you must use IAM to grant permissions. The cluster you are using for this tutorial is configured to use Workload Identity, which allows a Kubernetes service account to act as a Google service account.

1. Create a Google service account for your application to use:

   gcloud iam service-accounts create sa-test-app-team-x
   

2. Allow the Kubernetes service account to impersonate the Google service account:

   gcloud iam service-accounts add-iam-policy-binding \
     --role roles/iam.workloadIdentityUser \
     --member "serviceAccount:${PROJECT_ID}.svc.id.goog[team-x/test]" \
     sa-test-app-team-x@${PROJECT_ID}.iam.gserviceaccount.com
   

3. Annotate the Kubernetes service account for the test app in the team-x namespace with the email address of the Google service account:

   cat <<EOF | kubectl apply -f -
   apiVersion: v1
   kind: ServiceAccount
   metadata:
     annotations:
       iam.gke.io/gcp-service-account: sa-test-app-team-x@${PROJECT_ID}.iam.gserviceaccount.com
     name: test
     namespace: team-x
   EOF
   

4. The test application pod must be able to access the Google metadata server (running as a DaemonSet) to obtain temporary credentials for calling Google APIs. Create a service entry for the GKE metadata server:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: ServiceEntry
   metadata:
     name: metadata-google-internal
     namespace: istio-egress
   spec:
     hosts:
     - metadata.google.internal
     ports:
     - number: 80
       name: http
       protocol: HTTP
     - number: 443
       name: tls
       protocol: TLS
     resolution: DNS
     location: MESH_EXTERNAL
     exportTo:
     - 'istio-egress'
     - 'team-x'
   EOF
   

5. Also create a service entry for private.googleapis.com and storage.googleapis.com:

   cat <<EOF | kubectl apply -f -
   apiVersion: networking.istio.io/v1beta1
   kind: ServiceEntry
   metadata:
     name: private-googleapis-com
     namespace: istio-egress
   spec:
     hosts:
     - private.googleapis.com
     - storage.googleapis.com
     ports:
     - number: 80
       name: http
       protocol: HTTP
     - number: 443
       name: tls
       protocol: TLS
     resolution: DNS
     location: MESH_EXTERNAL
     exportTo:
     - 'istio-egress'
     - 'team-x'
   EOF
   

6. Verify that the Kubernetes service account is correctly configured to act as the Google service account:

   kubectl -n team-x exec -it $(kubectl -n team-x get pod -l app=test \
       -o jsonpath={.items..metadata.name}) -c test -- gcloud auth list
   

   You see the Google service account listed as the active and only identity.

7. Create a test file in a Cloud Storage bucket:

   echo "Hello, World!" > /tmp/hello
   gsutil mb gs://${PROJECT_ID}-bucket
   gsutil cp /tmp/hello gs://${PROJECT_ID}-bucket/
   

8. Grant permission for the service account to list and view files in the bucket:

   gsutil iam ch \
   serviceAccount:sa-test-app-team-x@${PROJECT_ID}.iam.gserviceaccount.com:objectViewer \
       gs://${PROJECT_ID}-bucket/
   

9. Verify that the test application can access the test bucket:

   kubectl -n team-x exec -it \
   $(kubectl -n team-x get pod -l app=test -o jsonpath={.items..metadata.name}) \
   -c test \
   -- gsutil cat gs://${PROJECT_ID}-bucket/hello
   

   You see:

   Hello, World!
   

Clean up

To avoid incurring charges to your Google Cloud account for the resources used in this tutorial, either delete the project that contains the resources, or keep the project and delete the individual resources.

To avoid incurring charges to your Google Cloud account for the resources used in this tutorial, complete the steps in the following sections.:

Delete the project

The easiest way to eliminate billing is to delete the project you created for the tutorial.

Caution: Deleting a project has the following effects:

• Everything in the project is deleted. If you used an existing project for the tasks in this document, when you delete it, you also delete any other work you've done in the project.
• Custom project IDs are lost. When you created this project, you might have created a custom project ID that you want to use in the future. To preserve the URLs that use the project ID, such as an appspot.com URL, delete selected resources inside the project instead of deleting the whole project.

If you plan to explore multiple architectures, tutorials, or quickstarts, reusing projects can help you avoid exceeding project quota limits.

1. In the Google Cloud console, go to the Manage resources page.

   Go to Manage resources

2. In the project list, select the project that you want to delete, and then click Delete.
3. In the dialog, type the project ID, and then click Shut down to delete the project.

What's next

• Read the companion best practices guide.
• Consult the GKE hardening guide.
• Learn about managing configuration and policy across all of your infrastructure with GKE Enterprise Configuration Management.
• For more reference architectures, diagrams, and best practices, explore the Cloud Architecture Center.