Create router appliance instances

Router appliance is one of several supported spoke types for Network Connectivity Center. This page describes how to create and set up a router appliance instance. Depending on the approach that you choose, some parts of the process might be automated. However, all of the required tasks must be completed before you can establish connectivity by using a Router appliance spoke.

The required tasks include the following:

  1. Create the VM that you want to use as a router appliance instance. You can create the VM by using a supported partner solution or your own custom image.

  2. Ensure that the router appliance instance is accessible to BGP traffic through TCP port 179. To ensure this accessibility, you might need to create a firewall rule.

  3. Create a spoke that uses your router appliance instance.

  4. Set up a Cloud Router. This task includes the following sub-tasks:

    1. Create a Cloud Router in the same region as the router appliance instance.

    2. Create two interfaces on the Cloud Router.

    3. Configure BGP peering on the Cloud Router.

  5. Configure BGP peering on the router appliance instance.

The way that you complete these tasks can vary significantly. For example, if you create a router appliance instance by using a partner solution, some of the later tasks might be automated for you.

Network Connectivity Center lets you implement a hub-and-spoke architecture for network connectivity management in Google Cloud. For more information, see the Network Connectivity Center overview.

Sample configuration

This page describes how to set up a sample site-to-cloud configuration. In this setup, two router appliance instances provide connectivity between a Virtual Private Cloud (VPC) network and an on-premises network. Network Connectivity Center uses equal-cost multipath (ECMP) routing to load balance traffic across the router appliance instances. It uses Border Gateway Protocol (BGP) to distribute routes between the networks.

The sample configuration places the router appliance instances in the same subnetwork (subnet). However, each router appliance instance is in a different zone.

Each router appliance instance maintains BGP sessions with the same Cloud Router. This Cloud Router has two interfaces. Each router appliance instance peers with each of these interfaces, for a total of four peering sessions.

This topology does not exemplify site-to-site data transfer. However, the instructions for setting up this topology are almost identical to what you would use for one half of a site-to-site data transfer topology; exceptions are noted in the instructions. For more information about site-to-site data transfer, see the Router appliance overview.

Creating BGP sessions for router appliances
Creating BGP sessions for router appliance instances (click to enlarge)

Before you begin

Before you get started, review the following sections.

Create or select a project

To make it easier to configure Network Connectivity Center, start by identifying a valid project.

  1. Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.
  2. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  3. Make sure that billing is enabled for your Google Cloud project.

  4. Install the Google Cloud CLI.
  5. To initialize the gcloud CLI, run the following command:

    gcloud init
  6. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  7. Make sure that billing is enabled for your Google Cloud project.

  8. Install the Google Cloud CLI.
  9. To initialize the gcloud CLI, run the following command:

    gcloud init
  1. If you are using the Google Cloud CLI, set your project ID by using the gcloud config set command.

    gcloud config set project PROJECT_ID

    Replace PROJECT_ID with your unique project ID.

    The gcloud CLI instructions on this page assume that you have set your project ID.

  1. To confirm that you set the project ID correctly, use the gcloud config list command.

    gcloud config list --format='text(core.project)'

Enable the Network Connectivity API

Before you can perform any tasks using Network Connectivity Center, you must enable the Network Connectivity API.

Console

To enable the Network Connectivity API:

  1. In the Google Cloud console, go to the Network Connectivity Center page.

    Go to Network Connectivity Center

  2. Click Enable.

Alternatively, you can enable the API by using the Google Cloud console API Library, as described in Enabling APIs.

Get access

To work with Network Connectivity Center, you need the permissions described in Roles and permissions.

When you configure Network Connectivity Center, you also work with Google Cloud resources such as VPC networks, subnets, and firewall rules. For more information about the permissions you need to work with these resources, see the Compute Engine access control documentation.

IP addresses and router appliance instances

To set up a router appliance instance, you must establish peering between the instance and the Cloud Router. To set up peering, the VM must use an RFC 1918 internal IP address. You cannot peer these two resources if the VM uses a different type of address.

For information about how to view a VM's IP addresses, see the following documents:

For definitions and detailed information about IP address types, see IP addresses.

Reserve a static internal IP address (recommended)

We recommend that you give your router appliance instance a static internal IP address so that the address doesn't change during reboot. If the address changes, BGP peering fails.

You have several options for assigning a reserved IP address. You can reserve the IP address in advance. Alternatively, you can reserve the IP address when you create the VM. If you mistakenly give the VM an ephemeral address, you can later convert the address into a static address. For more information about static IP addresses, see Reserving a static internal IP address.

IP addresses for BGP peering

A router appliance instance uses its internal IP address to peer with the Cloud Router. The instance does not use a link-local address (such as 169.254.x.x) for BGP peering.

Similarly, the Cloud Router uses two RFC 1918 internal IP addresses to peer with the router appliance instance, one address for each interface. These IP addresses can be manually or automatically assigned from the subnet that contains both the router appliance instance interface and the Cloud Router interface.

Create VPC resources

The following sections describe how to create a VPC network and subnet.

Create a VPC network

If you haven't already, create a VPC network. Set the network's dynamic routing mode to global.

For more information about creating VPC networks, see Create networks.

Console

To create a custom VPC network using the Google Cloud console, see Creating a custom mode network. Make sure to set Dynamic routing mode to Global. If you want to follow the naming conventions used in the sample configuration, call your network network-a.

gcloud

To create a custom VPC network, use the gcloud compute networks create command.

  gcloud compute networks create NAME \
      --subnet-mode custom \
      --bgp-routing-mode global

Replace NAME with the name of the VPC network—for example, network-a.

API

To create a custom VPC network by using the Compute Engine API, see Create and manage VPC networks.

Create a subnet

Create one subnet in network-a to contain the VM instances used as router appliance instances.

Console

To add a subnet using the Google Cloud console, see Adding subnets.

If you want to follow the naming conventions used in the sample configuration, use the following values:

  • Name: subnet-a-1
  • Region: us-west1
  • Range: 10.0.1.0/24

gcloud

To create a VPC subnet, use the gcloud compute networks subnets create command.

  gcloud compute networks subnets create NAME \
      --network=NETWORK \
      --region=REGION \
      --range=RANGE

Replace the following:

  • NAME: the name of the subnet that contains the router appliance VM—for example, subnet-a-1
  • NETWORK: the network that contains the subnet—for example, network-a
  • REGION: the region that contains the subnet—for example, us-west1
  • RANGE: the IP range of the subnet in CIDR notation—for example, 10.0.1.0/24

API

To create a VPC subnet by using the Compute Engine API, see Create and manage VPC networks.

Create router appliance VMs

Create the Compute Engine VMs that act as router appliance instances. The sample configuration uses two VMs, router-app-a and router-app-b.

At a high level, you create a router appliance image by creating a VM that uses a network virtual appliance image. This image can be any of the following:

For more information about specifying images, see the following resources:

For detailed information about creating VMs, see Create and start a VM instance.

The examples in this section assume that you have reserved IP addresses for the router appliance instance. For more information, see IP addresses and router appliance instances.

Console

To create the two VMs shown in the sample configuration, see Create and start a VM instance. When you create the VM, make the following choices:

  • If you want to follow the naming conventions used in the sample configuration, use the following values:

    • Name: router-app-a or router-app-b
    • Region:us-west1
    • Zone: us-west1-a or us-west1-b
  • To select an image, go the Boot disk area of the page, click Change, and navigate to the appropriate image for the VM.

  • Expand Networking, disks, security, management, sole tenancy, and then expand Networking. Use the following values:

    • Under IP forwarding, select Enable.
    • Under Network interfaces, select Add Network Interface, and fill in the following fields:
      • Select the Subnet where you want to locate the router appliance instance—for example, subnet-a-1.
      • Under Primary internal IP, select the reserved RFC 1918 internal IP address that you want to use—for example, 10.0.1.10.
      • Under Network Service Tier, select Premium; this choice maximizes the extent to which traffic uses Google's network.

gcloud

To create the two router appliance VMs shown in the sample configuration, use the gcloud compute instances create command. Use the command twice, once to create router-app-a and again to create router-app-b.

The following sample snippet assigns the VM a static internal IP address and a static external IP address. It also specifies a vendor-provided image to use for the VM.

  gcloud compute instances create INSTANCE_NAME \
      --project=PROJECT \
      --zone=ZONE \
      --machine-type=MACHINE_TYPE \
      --network-tier=NETWORK_TIER \
      --network-interface=[subnet=SUBNET,private-network-ip=INTERNAL_IP_ADDRESS] \
      --can-ip-forward \
      --image-project=IMAGE_PROJECT \
      --image=IMAGE

Replace the following:

  • INSTANCE_NAME: the name of the VM that acts as a router appliance instance—for example, router-app-a or router-app-b
  • PROJECT: the name of the project that contains the router appliance VMs—for example, my-project
  • ZONE: the Google Cloud zone that the VM is located in—for example, us-west1-a
  • MACHINE_TYPE: the machine type resource to use for the VM—for example, n1-standard-2
  • NETWORK_TIER: when creating the router appliance VMs, set the network tier to premium; this choice maximizes the extent to which traffic uses Google's network
  • SUBNET: the subnet assigned to the primary network interface for the VM—for example, subnet-a-1
  • INTERNAL_IP_ADDRESS: the RFC 1918 internal IP address that is assigned to the VM interface that connects to the Cloud Router—for example, 10.0.1.10
  • IMAGE_PROJECT: the name of the project that contains the image specified in the image field—for example, debian-cloud
  • IMAGE: the name of the image to install—for example, debian-10-buster-v20210217

API

To create the two router appliance VMs shown in the sample configuration, use the compute.instances.insert method. Use the method twice, once to create router-app-a and again to create router-app-b.

The following sample snippet assigns the VM a static internal IP address and a static external IP address. It also specifies a vendor-provided image to use for the VM.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT/zones/ZONE/instances
 {
   "machineType": "zones/ZONE/machineTypes/MACHINE_TYPE",
   "name": "INSTANCE_NAME",
   "canIpForward": "true",
   "networkInterfaces": [{
     "subnetwork": "regions/REGION/subnetworks/SUBNET",
     "networkIP": "INTERNAL_IP_ADDRESS",
     "accessConfigs": [{
         "networkTier": "NETWORK_TIER,
       }]
     }],
    "disks": [{
      "initializeParams": {
          "sourceImage": "projects/IMAGE_PROJECT/global/images/IMAGE"
      },
      "boot": true
   }]
 }

Replace the following:

  • PROJECT: the name of the project that contains the router appliance VMs—for example, my-project
  • ZONE: the Google Cloud zone that the VM is located in—for example, us-west1-a
  • MACHINE_TYPE: the machine type resource to use for the VM—for example, zones/us-west1-a/machineTypes/n1-standard-2
  • INSTANCE_NAME: the name of the VM—for example, router-app-a or router-app-b
  • REGION: the region that contains the VM—for example, us-west1
  • SUBNET: the subnet assigned to the primary network interface for the VM—for example, regions/us-west1/subnetworks/subnet-a-1
  • INTERNAL_IP_ADDRESS: the RFC 1918 internal IP address that is assigned to the VM; configure the address for the VM interface that connects to the Cloud Router—for example, 10.0.1.10
  • NETWORK_TIER: when creating the router appliance VMs, set the network tier to premium; this choice maximizes the extent to which traffic uses Google's network
  • IMAGE_PROJECT: the name of the project that contains the image that you specify when creating the VM—for example, debian-cloud
  • IMAGE: the name of the image to use when creating the VM—for example, debian-10-buster-v20210217

Create a firewall rule to allow BGP

Create a firewall rule that allows BGP traffic to network-a on TCP port 179.

For more information about firewall commands, see Use VPC firewall rules.

Console

To create a VPC firewall rule using the Google Cloud console, see Use VPC firewall rules.

gcloud

To create a VPC firewall rule by using the Google Cloud CLI, see Use VPC firewall rules.

API

To create a VPC firewall rule by using the Compute Engine API, see Use VPC firewall rules.

Create Network Connectivity Center resources

Before you can use a router appliance VM, you must create the required Network Connectivity Center resources, including a Router appliance spoke.

Create a hub

Before you can create Network Connectivity Center spokes, you must create a hub.

Console

  1. In the Google Cloud console, go to the Network Connectivity Center page.

    Go to Network Connectivity Center

  2. In the project menu, select a project.

  3. Enter a Hub name.

  4. Enter an optional Description.

  5. Verify the Project ID. If the project ID is incorrect, select a different project by using the menu at the top of the screen.

  6. Click Continue.

  7. The console displays a form that lets you create a spoke. To fill it out now, use the steps described in Create a Router appliance spoke.

  8. Click Done.

gcloud

To create a hub, use the gcloud network-connectivity hubs create command.

  gcloud network-connectivity hubs create HUB_NAME \
    --description="DESCRIPTION" \
    --labels="KEY"="VALUE"

Replace the following values:

  • HUB_NAME: the name of the new hub
  • DESCRIPTION: optional text that describes the hub
  • KEY: the key in the key-value pair for the optional label text
  • VALUE: the value in the key-value pair for the optional label text

API

To create a hub, use the networkconnectivity.hubs.create method.

  POST https://networkconnectivity.googleapis.com/v1/projects/PROJECT_ID/locations/global/hubs
  {
    "name":"HUB_NAME",
    "description":"DESCRIPTION",
    "labels": {
      "KEY": "VALUE"
    }
  }

Replace the following values:

  • PROJECT_ID: the project ID of the project that contains the new hub
  • HUB_NAME: the name of the new hub
  • DESCRIPTION: optional text that describes the hub
  • KEY: the key in the key-value pair for the optional label text
  • VALUE: the value in the key-value pair for the optional label text

Create a Router appliance spoke

Create a Router appliance spoke that uses the two router appliance instances that you just created. Creating a spoke is required for enabling BGP peering between the router appliance instance and the Cloud Router, which you create in the next step.

For more information about how to create a spoke, see Work with hubs and spokes.

Console

Enter basic spoke details

  1. In the Google Cloud console, go to the Network Connectivity Center page.
  2. Go to Network Connectivity Center
  3. In the project pull-down menu, select a project.
  4. Click the Spokes tab.
  5. Click Add spokes.
  6. In the New spoke form, set the Spoke type.
  7. Enter a Spoke name and optionally, a Description.
  8. Select the Region field for the new spoke.
  9. Under Site-to-site data transfer, select On or Off. If the region you selected does not support data transfer, the field is disabled. For more information about this use case, see Site-to-site data transfer overview.
  10. In the VPC network drop-down list, select a network. If you have more than one spoke that uses the data transfer feature, all of these spokes must be in the same VPC network. So if you have already created a spoke that uses data transfer, the VPC network value is prepopulated and cannot be changed.

Enter router appliance details

  1. Set Spoke type to Router appliance.
  2. Select the Region for the spoke.
  3. Choose a router appliance instance:
    1. Click Add instance.
    2. From the Instances menu, select an existing router appliance instance.
  4. To add more router appliance instances to this spoke, repeat the preceding step. When you are finished, click Done and continue to Save your spoke.

Save your spoke

  1. If you want to add more spokes, click Add spoke and begin the process again, starting with entering a Spoke name.
  2. When you are finished adding spokes, click Create. The Network Connectivity Center page updates to show details about the spokes that you created.

gcloud

To create a Router appliance spoke, use the gcloud network-connectivity spokes linked-router-appliances create command.

The following sample snippet creates a spoke that contains two router appliance instances. In this sample, the spoke does not use the site-to-site data transfer feature. (To enable data transfer, add one more flag: --site-to-site-data-transfer.)

  gcloud network-connectivity spokes linked-router-appliances create NAME \
    --hub="HUB_URI" \
    --description="DESCRIPTION" \
    --router-appliance=instance="ROUTER_APPLIANCE_URI",ip=IP_ADDRESS \
    --router-appliance=instance="ROUTER_APPLIANCE_URI_2",ip=IP_ADDRESS_2 \
    --region=REGION \
    --labels="KEY"="VALUE" \
 

Replace the following values:

  • NAME: the name of the spoke
  • HUB_URI: the URI of the hub that you are attaching the spoke to
  • DESCRIPTION: optional text that describes the spoke—for example, us-vpn-spoke
  • ROUTER_APPLIANCE_URI: the URI of the first router appliance instance—for example,
    https://www.googleapis.com/compute/projects/PROJECT_ID/zones/ZONE/instances/INSTANCE_NAME 
  • IP_ADDRESS: the internal IP address of the first router appliance instance
  • ROUTER_APPLIANCE_URI_2: the URI of the second router appliance instance
  • IP_ADDRESS_2: the internal IP address of the second router appliance instance
  • REGION: the Google Cloud region where you want to locate the spoke—for example, us-west1
  • KEY: the key in the key-value pair for the optional label text
  • VALUE: the value in the key-value pair for the optional label text

    For example, the following command creates a router appliance spoke that uses router-app-a and router-app-b as its underlying resources:

    gcloud network-connectivity spokes linked-router-appliances create my-spoke \
        --hub=my-hub \
        --description="Test spoke 1" \
        --router-appliance=instance="https://www.googleapis.com/compute/v1/projects/my-project/zones/us-west1-a/instances/router-app-a",ip=10.0.1.10 \
        --router-appliance=instance="https://www.googleapis.com/compute/v1/projects/my-project/zones/us-west1-b/instances/router-app-b",ip=10.0.1.11 \
        --region=us-west1 \
        --labels="environment"="test"
    

    To create the same spoke but enable data transfer, use the following command:

    gcloud network-connectivity spokes linked-router-appliances create my-spoke \
        --hub=my-hub \
        --description="Test spoke 1" \
        --router-appliance=instance="https://www.googleapis.com/compute/v1/projects/my-project/zones/us-west1-a/instances/router-app-a",ip=10.0.1.10 \
        --router-appliance=instance="https://www.googleapis.com/compute/v1/projects/my-project/zones/us-west1-b/instances/router-app-b",ip=10.0.1.11 \
        --region=us-west1 \
        --labels="environment"="test"
        --site-to-site-data-transfer
    

API

To create a Router appliance spoke, use the networkconnectivity.spokes.create method.

The following sample snippet creates a spoke that contains two router appliance instances. Each instance is included in the linkedRouterApplianceInstances.instances array.

  POST https://networkconnectivity.googleapis.com/v1/projects/PROJECT_ID/locations/REGION/spokes/SPOKE_NAME
  {
    "hub": "HUB_URI",
    "labels": {"KEY": "VALUE"},
    "linkedRouterApplianceInstances": {
      "instances": [
        {
          "virtualMachine": "ROUTER_APPLIANCE_URI",
          "ipAddress": INTERNAL_IP_ADDRESS,
        },
        {
          "virtualMachine": "ROUTER_APPLIANCE_URI_2,
          "ipAddress": INTERNAL_IP_ADDRESS_2,
        }
      ],
      "siteToSiteDataTransfer": BOOLEAN
    }
  }
 

Replace the following values:

  • PROJECT_ID: the project ID of your project
  • REGION: the Google Cloud region where you want to locate the spoke—for example, us-west1
  • SPOKE_NAME: the name you want to give the spoke
  • HUB_URI: the URI of the hub that you are attaching the spoke to—for example,
    http://networkconnectivity.googleapis.com/v1/projects/PROJECT_NAME/locations/global/hubs/HUB_NAME 
  • KEY: the key in the key-value pair for the optional label text
  • VALUE: the value in the key-value pair for the optional label text
  • ROUTER_APPLIANCE_URI: the URI of the first router appliance instance—for example,
    https://www.googleapis.com/compute/projects/PROJECT_ID/zones/ZONE/instances/INSTANCE_NAME 
  • IP_ADDRESS: the internal IP address of the first router appliance instance
  • ROUTER_APPLIANCE_URI_2: the URI of the second router appliance instance
  • IP_ADDRESS_2: the internal IP address of the second router appliance instance
  • BOOLEAN: a value that determines whether site-to-site data transfer is enabled for this spoke

    For example, to create a spoke that uses router-app-a and router-app-b as its underlying resources, the body of your request should be structured as follows:

    {
      "hub": "http://networkconnectivity.googleapis.com/v1/projects/my-project/locations/global/hubs/my-hub",
    
      "labels": {
        "environment" : "test"
      },
    
      "linkedRouterApplianceInstances": {
         "instances": [
           {
             "virtualMachine": "https://www.googleapis.com/compute/v1/projects/my-project/zones/us-west1-a/instances/router-app-a",
             "ipAddress": "10.0.1.10",
           },
           {
             "virtualMachine": "https://www.googleapis.com/compute/v1/projects/my-project/zones/us-west1-b/instances/router-app-b",
             "ipAddress":  "10.0.1.11",
           }
        ],
        "siteToSiteDataTransfer": true
      }
    }
    
    

Set up a Cloud Router

Router appliance uses a Cloud Router to exchange routes with your VPC network. For this reason, you must create a Cloud Router and complete a few other setup tasks.

Create a Cloud Router

Create the resource in the same network and region where the router VM is. In the sample configuration, these resources are network-a and us-west1.

For more information, see Create a Cloud Router.

Console

To create a Cloud Router in the Google Cloud console, use one of the following approaches:

  • Use the Cloud Router page, as described in Create a Cloud Router.

  • Use the Network Connectivity Center page. The advantage of this approach is that it lets you create the router, the interfaces, and the BGP sessions at the same time. For more information about completing all of these steps together, see Configure BGP peering on the Cloud Router.

gcloud

To create a Cloud Router, use the gcloud compute routers create command.

  gcloud compute routers create NAME \
      --region=REGION \
      --network=NETWORK \
      --asn=ASN \
      --project=PROJECT_ID

Replace the following:

  • NAME: the name of the Cloud Router—for example, cloud-router-a
  • REGION: the region that contains the Cloud Router—for example, us-west1
  • NETWORK: the VPC network that contains the Cloud Router—for example, network-a
  • ASN: the autonomous system number (ASN) for the Cloud Router—this ASN must be a 16-bit or 32-bit private ASN as defined in RFC 6996—for example, 65000
  • PROJECT_ID: the project ID for the Cloud Router—for example, my-project

API

To create a Cloud Router, use the compute.routers.insert method.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/routers
{
 "name": "NAME",
 "network": "NETWORK",
 "bgp": {
   "asn": ASN
  }
}

Replace the following:

  • PROJECT_ID: the project ID for the Cloud Router—for example, my-project
  • REGION: the region that contains the Cloud Router—for example, us-west1
  • NAME: the name of the Cloud Router—for example, cloud-router-a
  • NETWORK: the URI of the VPC network that contains the Cloud Router—for example, /global/networks/network-a
  • ASN: the autonomous system number (ASN) for the Cloud Router—this ASN must be a 16-bit or 32-bit private ASN as defined in RFC 6996—for example, 65000

Create two redundant interfaces on the Cloud Router

Create two redundant Cloud Router interfaces that, in the sample configuration, are associated with subnet-a-1.

The Cloud Router interface uses a regional internal IP address.

If you explicitly specify the internal IP address for the interface, the IP address must belong to the subnet's primary IP address range. It must not already be in use by another resource, such as a VM or a different Cloud Router interface. To reserve an IP address from the subnet in advance, create an address resource and then use the reserved IP address for the Cloud Router interface.

There are no Google Cloud console instructions for this step because when you create a BGP peer by using the Google Cloud console, the interfaces are created for you automatically.

gcloud

To create the two redundant Cloud Router interfaces shown in the sample configuration, use the gcloud compute routers add-interface command. Use the command twice, once to create router-appliance-interface-0 and again to create router-appliance-interface-1.

If you don't specify the --ip-address option, Google tries to find a free IP address from the subnet's primary IP range to assign to the interface.

  1. Create the first Cloud Router interface:

    gcloud compute routers add-interface NAME \
        --interface-name=INTERFACE_NAME \
        --ip-address=IP_ADDRESS \
        --subnetwork=SUBNET \
        --region=REGION \
        --project=PROJECT_ID
    
  2. Create the redundant Cloud Router interface:

    gcloud compute routers add-interface NAME \
        --interface-name=INTERFACE_NAME \
        --ip-address=IP_ADDRESS \
        --subnetwork=SUBNET \
        --redundant-interface=REDUNDANT_INTERFACE \
        --region=REGION \
        --project=PROJECT_ID
    

    Replace the following:

    • NAME: the name of the Cloud Router to update—for example, cloud-router-a
    • INTERFACE_NAME: the name of the interface—for example, router-appliance-interface-0 or router-appliance-interface-1
    • IP_ADDRESS: the RFC 1918 internal IP address to use for the interface—for example, 10.0.1.5 or 10.0.1.6
    • SUBNET: the subnet that includes the internal IP address—for example, subnet-a-1
    • REDUNDANT_INTERFACE: the redundant Cloud Router interface that peers with the same router appliance instance as the primary interface—for example, router-appliance-interface-0
    • REGION: the Google Cloud region where the Cloud Router is—for example, us-west1
    • PROJECT_ID: the project ID for the Cloud Router—for example, my-project
  • The following command creates the first interface on the Cloud Router as described in the sample configuration:

    gcloud compute routers add-interface cloud-router-a \
        --interface-name=router-appliance-interface-0 \
        --ip-address=10.0.1.5 \
        --subnetwork=subnet-a-1 \
        --region=us-west1 \
        --project=my-project
    
  • The following command creates the redundant interfaces on the Cloud Router as described in the sample configuration:

    gcloud compute routers add-interface cloud-router-a \
        --interface-name=router-appliance-interface-1 \
        --ip-address=10.0.1.6 \
        --subnetwork=subnet-a-1 \
        --redundant-interface=router-appliance-interface-0 \
        --region=us-west1 \
        --project=my-project
    

API

To create the two redundant Cloud Router interfaces shown in the sample configuration, use the compute.routers.patch method. Use the method twice, once to create router-appliance-interface-0 and again to create router-appliance-interface-1.

If you don't specify the privateIpAddress option, Google tries to find a free IP address from the subnet's primary IP range to assign to the interface.

  1. Create the first Cloud Router interface:

    "PATCH
    https"://www.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/routers/NAME
    {
      "region":"REGION",
      "interfaces":[
        {
          "name":"INTERFACE_NAME",
          "privateIpAddress:"IP_ADDRESS",
          "subnetwork": "https":"//www.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/subnetworks/SUBNET"
        }
      ]
    }
    
  2. Create the redundant Cloud Router interface:

    "PATCH
    https"://www.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/routers/NAME
    {
      "region":"REGION",
      "interfaces":[
        {
          "name":"INTERFACE_NAME_1",
          "privateIpAddress:"IP_ADDRESS",
          "subnetwork": "https://www.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/subnetworks/SUBNET"
        },
        {
          "name":"INTERFACE_NAME_2",
          "privateIpAddress:"IP_ADDRESS",
          "subnetwork": "https://www.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/subnetworks/SUBNET",
          "redundantInterface": "INTERFACE_NAME_1"
        }
      ]
    }
    

    Replace the following:

    • PROJECT_ID: the project ID for the Cloud Router—for example, my-project
    • REGION: the Google Cloud region where the Cloud Router is—for example, us-west1
    • NAME: the name of the Cloud Router to update—for example, cloud-router-a
    • NETWORK: the VPC network that contains the Cloud Router—for example,network-a
    • INTERFACE_NAME_1: the name of the primary interface—for example, router-appliance-interface-0
    • SUBNET: the URL for the subnet that contains the RFC 1918 internal IP address
    • IP_ADDRESS: the internal IP address to use for the interface—for example, 10.0.1.5 or 10.0.1.6
    • INTERFACE_NAME_2: the name of the redundant Cloud Router interface—for example, router-appliance-interface-1
  • The following command creates the first interface on cloud-router-a as described in the sample configuration:

    "PATCH https"://www.googleapis.com/compute/v1/projects/my-project/regions/us-west1/routers/cloud-router-a
    {
    "region":"us-west1",
    "interfaces":[
      {
        "name":"router-appliance-interface-0",
        "privateIpAddress:"10.0.1.5",
        "subnetwork": "https://www.googleapis.com/compute/v1/projects/my-project/regions/us-west1/subnetworks/>"
      }
    ]
    }
    
  • The following command creates the redundant interfaces on cloud-router-a as described in the sample configuration:

    "PATCH https"://www.googleapis.com/compute/v1/projects/my-project/regions/us-west1/routers/cloud-router-a
    {
    "region":"us-west1",
    "interfaces":[
      {
        "name":"router-appliance-interface-0",
        "privateIpAddress:"10.0.1.5",
        "subnetwork": "https://www.googleapis.com/compute/v1/projects/my-project/regions/us-west1/subnetworks/subnet-a-1"
      },
      {
        "name":"router-appliance-interface-0",
        "privateIpAddress:"10.0.1.6",
        "subnetwork": "https://www.googleapis.com/compute/v1/projects/my-project/regions/us-west1/subnetworks/subnet-a-1",
        "redundantInterface": "router-appliance-interface-0"
      }
    ]
    }
    

Configure BGP peering on the Cloud Router

For each router appliance instance, you must create two BGP peers on the Cloud Router—one for each Cloud Router interface. The BGP peer IP address must be the primary internal IP address for the VM that is configured as a router appliance instance.

Create BGP peers for router-app-a

This section describes how to create two BGP peers for the router appliance instance named router-app-a in the sample configuration. The next section describes how to create two BGP peers on router-app-b.

The following example shows how to configure router-app-a as a BGP peer on both interfaces of Cloud Router cloud-router-a.

Console

  1. Go to the Network Connectivity Center page.
  2. Go to Network Connectivity Center
  3. In the project pull-down menu, select a project.
  4. Click the Spokes tab.
  5. In the Spoke name column, select a spoke to view the Spoke details page.

  1. In the Name column, locate router-app-a. Click the expand icon to display the Configure BGP session links. Click either of these links. In response, the system displays the Configure Cloud Router and BGP sessions panel.

  1. Under Cloud Router, do one of the following:

    • To select an existing Cloud Router, click Use existing. Use the Cloud Router field to identify the appropriate resource, and then click Select and continue.
    • To create a Cloud Router on the Network Connectivity Center page, click Create new, and follow the prompts to create the Cloud Router. Then click Create and continue.
  2. Under BGP Sessions, set up the two BGP sessions. Complete the following steps twice, once for each session:
    1. Click Edit BGP session.
    2. Fill in the form by entering a Name, a Peer ASN, and an Advertised route priority (MED). Click Save and continue.
  3. Click Create.

gcloud

To create BGP peers on the Cloud Router for router-app-a, use the gcloud compute routers add-bgp-peer command. Use the command twice—once to create the first BGP peer and again to create the second BGP peer.

  1. Create the first BGP peer:

    gcloud compute routers add-bgp-peer NAME \
        --peer-name=PEER_NAME \
        --interface=INTERFACE \
        --peer-ip-address=PEER_IP_ADDRESS \
        --peer-asn=PEER_ASN \
        --instance=ROUTER_APPLIANCE \
        --instance-zone=ROUTER_APPLIANCE_ZONE \
        --region=REGION
    
  2. Create the second BGP peer:

    gcloud compute routers add-bgp-peer NAME \
        --peer-name=PEER_NAME \
        --interface=INTERFACE \
        --peer-ip-address=PEER_IP_ADDRESS \
        --peer-asn=PEER_ASN \
        --instance=ROUTER_APPLIANCE \
        --instance-zone=ROUTER_APPLIANCE_ZONE \
        --region=REGION
    

    Replace the following:

    • NAME: the name of the Cloud Router to update
    • PEER_NAME: the name of the BGP peering session to establish with the router appliance instance
    • INTERFACE: the name of the interface for this BGP peer
    • PEER_IP_ADDRESS: the internal IP address of the peer router (the router appliance instance)—this address must match the primary internal IP address for the VM's primary network interface (nic0)
    • PEER_ASN: the BGP autonomous system number (ASN) for this BGP peer—this ASN must be a 16-bit or 32-bit private ASN as defined in RFC 6996
    • ROUTER_APPLIANCE: the name of the VM acting as the router appliance instance
    • ROUTER_APPLIANCE_ZONE: the zone where the VM acting as the router appliance instance is located
    • REGION: the region where the VM acting as the router appliance instance is located

The following sample snippets show how to create both peers for router-app-a:

  gcloud compute routers add-bgp-peer cloud-router-a \
      --peer-name=router-appliance-bgp-peer-router-app-a-0 \
      --interface=router-appliance-interface-0 \
      --peer-ip-address=10.0.1.10 \
      --peer-asn=65001 \
      --instance=router-app-a \
      --instance-zone=us-west1-a \
      --region=us-west1
  gcloud compute routers add-bgp-peer cloud-router-a \
      --peer-name=router-appliance-bgp-peer-router-app-a-1 \
      --interface=router-appliance-interface-1 \
      --peer-ip-address=10.0.1.10 \
      --peer-asn=65001 \
      --instance=router-app-a \
      --instance-zone=us-west1-a \
      --region=us-west1

API

To create BGP peers on the Cloud Router for router-app-a, use the compute.routers.patch method. Use the method twice—once to create the first BGP peer and again to create the second BGP peer.

PATCH
https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/routers/NAME
{
  "bgpPeers": [
  {
    "name": "PEER_NAME",
    "interfaceName": "INTERFACE_NAME",
    "ipAddress": "IP_ADDRESS",
    "peerIpAddress": "PEER_IP_ADDRESS",
    "routerApplianceInstance": "https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zone/ROUTER_APPLIANCE_ZONE/instances/ROUTER_APPLIANCE_INSTANCE",
    "peerAsn": PEER_ASN,
  }
  {
    "name": "PEER_NAME",
    "interfaceName": "INTERFACE_NAME",
    "ipAddress": "IP_ADDRESS",
    "peerIpAddress": "PEER_IP_ADDRESS",
    "routerApplianceInstance": "https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zone/ROUTER_APPLIANCE_ZONE/instances/ROUTER_APPLIANCE_INSTANCE",
    "peerAsn": PEER_ASN
   }
 ]
}

Replace the following:

  • PROJECT_ID: the project ID for the Cloud Router
  • REGION: the region where the VM acting as the router appliance instance is located
  • NAME: the name of the Cloud Router to update
  • PEER_NAME: the name of the BGP peering session to establish with the router appliance instance
  • INTERFACE_NAME: the name of the Cloud Router interface to add the peer to
  • IP_ADDRESS: the RFC 1918 internal IP address to use for the Cloud Router interface
  • PEER_IP_ADDRESS: the internal IP address of the VM acting as a router appliance instance
  • ROUTER_APPLIANCE_INSTANCE: the name in URL format for the VM acting as the router appliance instance
  • ROUTER_APPLIANCE_ZONE: the zone where the VM acting as the router appliance instance is located
  • PEER_ASN: the BGP autonomous system number (ASN) for this BGP peer—this ASN must be a 16-bit or 32-bit private ASN as defined in RFC 6996

The following sample snippets show how to create both peers for router-app-a:

PATCH
https://compute.googleapis.com/compute/v1/projects/my-project/regions/us-west1/routers/cloud-router-a
{
  "bgpPeers": [
  {
    "name": "router-appliance-bgp-peer-router-app-a-0",
    "interfaceName": "router-appliance-interface-0",
    "ipAddress": "10.0.1.5",
    "peerIpAddress": "10.0.1.10",
    "routerApplianceInstance": "https://compute.googleapis.com/compute/v1/projects/my-project/zone/us-west1-a/instances/router-app-a",
    "peerAsn": 65001,
  }
  {
    "name": "router-appliance-bgp-peer-router-app-a-1",
    "interfaceName": "router-appliance-interface-1",
    "ipAddress": "10.0.1.6",
    "peerIpAddress": "10.0.1.10",
    "routerApplianceInstance": "https://compute.googleapis.com/compute/v1/projects/my-project/zone/us-west1-a/instances/router-app-a",
    "peerAsn": 65001
   }
 ]
}

Create BGP peers for router-app-b

As described previously, Cloud Router can establish BGP sessions to multiple VMs configured as router appliance instances. These VMs must all be in the same region. To create this configuration, you create additional BGP peering sessions on the same Cloud Router interfaces.

The preceding section described how to set up BGP peering for router-app-a. This section describes how to additionally configure router-app-b as a BGP peer on both interfaces of Cloud Router cloud-router-a.

Console

  1. Go to the Network Connectivity Center page.
  2. Go to Network Connectivity Center
  3. In the project pull-down menu, select a project.
  4. Click the Spokes tab.
  5. In the Spoke name column, select a spoke to view the Spoke details page.

  1. In the Name column, locate router-app-b. Click the expand icon to display the Configure BGP session links. Click either of these links. In response, the system displays the Configure Cloud Router and BGP sessions panel.

  1. Under Cloud Router, do one of the following:

    • To select an existing Cloud Router, click Use existing. Use the Cloud Router field to identify the appropriate resource, and then click Select and continue.
    • To create a Cloud Router on the Network Connectivity Center page, click Create new, and follow the prompts to create the Cloud Router. Then click Create and continue.
  2. Under BGP Sessions, set up the two BGP sessions. Complete the following steps twice, once for each session:
    1. Click Edit BGP session.
    2. Fill in the form by entering a Name, a Peer ASN, and an Advertised route priority (MED). Click Save and continue.
  3. Click Create.

gcloud

To create two BGP peers on the Cloud Router for router-app-b, use the gcloud compute routers add-bgp-peer command. Use the command twice—once to create the first BGP peer and again to create the second BGP peer.

  • Sample configuration for the first BGP peer:

    gcloud compute routers add-bgp-peer cloud-router-a \
        --peer-name=router-appliance-bgp-peer-router-app-b-0 \
        --interface=router-appliance-interface-0 \
        --peer-ip-address=10.0.1.11 \
        --peer-asn=65002 \
        --instance=router-app-b \
        --instance-zone=us-west1-b \
        --region=us-west1
    
  • Sample configuration for the second BGP peer:

    gcloud compute routers add-bgp-peer cloud-router-a \
        --peer-name=router-appliance-bgp-peer-router-app-b-1 \
        --interface=router-appliance-interface-1 \
        --peer-ip-address=10.0.1.11 \
        --peer-asn=65002 \
        --instance=router-app-b \
        --instance-zone=us-west1-b \
        --region=us-west1
    

API

To create two BGP peers on the Cloud Router for router-app-b, use the compute.routers.patch method. Use the method twice—once to create the first BGP peer and again to create the second BGP peer.

PATCH
https://compute.googleaps.com/compute/v1/projects/my-project/regions/us-west1/routers/cloud-router-a
{
  "bgpPeers": [
  {
    "name": "router-appliance-bgp-peer-router-app-b-0",
    "interfaceName": "router-appliance-interface-0",
    "ipAddress": "10.0.1.5",
    "peerIpAddress": "10.0.1.11",
    "routerApplianceInstance": "https://compute.googleapis.com/compute/v1/projects/my-project/zone/us-west1-b/instances/router-app-b",
    "peerAsn": 65002,
  }
  {
    "name": "router-appliance-bgp-peer-router-app-b-1",
    "interfaceName": "router-appliance-interface-1",
    "ipAddress": "10.0.1.6",
    "peerIpAddress": "10.0.1.11",
    "routerApplianceInstance": "https://compute.googleapis.com/compute/v1/projects/my-project/zone/us-west1-b/instances/router-app-b",
    "peerAsn": 65002
   }
 ]
}

Configure BGP on the router appliance instance

To configure your router appliance instance for BGP connectivity to the Cloud Router, refer to the vendor documentation for your router appliance image.

Use custom learned routes

Optionally, you can configure your router appliance instance to use custom learned routes. When you configure custom learned routes, Cloud Router behaves as if it learned the routes from the BGP peer (the router appliance instance).

To use custom learned routes, complete the following steps:

  1. Log in to your appliance. For each custom learned route that you want to specify, configure a static route for that IP prefix with the next hop set to the external network. This step is necessary because the router appliance instance needs to know how to forward traffic that uses the custom learned route.

  2. Update the BGP session on your Cloud Router to use the custom learned routes. Follow the steps described in Update an existing session to use custom learned routes.

Use MD5 authentication

If the router appliance image that you are using supports MD5 authentication, you can optionally add authentication to your BGP peering sessions. For information about using MD5 authentication with Cloud Router, see Use MD5 authentication.

What's next