Using IAP for TCP forwarding

This page explains how you can use IAP TCP forwarding to enable administrative access to VM instances that do not have public IP addresses or do not permit direct access over the internet.

IAP TCP forwarding allows you to establish an encrypted tunnel over which you can forward SSH, RDP, and other traffic to VM instances. IAP TCP forwarding also provides you fine-grained control over which users are allowed to establish tunnels and which VM instances users are allowed to connect to.

To learn more about how IAP TCP forwarding works, see the TCP forwarding overview.

Preparing your project for IAP TCP forwarding

This section walks you through the necessary steps to enable IAP TCP forwarding in your Google Cloud project.

Note: If you're behind a corporate proxy and aren't using Cloud VPN between your on-premises network and your VPC network, you need to whitelist the domain used by IAP for TCP.

Create a firewall rule

To allow IAP to connect to your VM instances, create a firewall rule that:

• applies to all VM instances that you want to be accessible by using IAP.
• allows ingress traffic from the IP range 35.235.240.0/20. This range contains all IP addresses that IAP uses for TCP forwarding.

• allows connections to all ports that you want to be accessible by using IAP TCP forwarding, for example, port 22 for SSH and port 3389 for RDP.

Console

To allow RDP and SSH access to all VM instances in your network, do the following:

• Open the Firewall Rules page and click Create firewall rule

  Open the Firewall Rules page

• Configure the following settings:

  • Name: allow-ingress-from-iap
  • Direction of traffic: Ingress
  • Target: All instances in the network
  • Source filter: IP ranges
  • Source IP ranges: 35.235.240.0/20
  • Protocols and ports: Select TCP and enter 22,3389 to allow both RDP and SSH.

• Click Create.

gcloud

To allow RDP access to all VM instances in your network, run:

gcloud compute firewall-rules create allow-rdp-ingress-from-iap \
  --direction=INGRESS \
  --action=allow \
  --rules=tcp:3389 \
  --source-ranges=35.235.240.0/20

For SSH access, run:

gcloud compute firewall-rules create allow-ssh-ingress-from-iap \
  --direction=INGRESS \
  --action=allow \
  --rules=tcp:22 \
  --source-ranges=35.235.240.0/20

For other protocols, run

gcloud compute firewall-rules create allow-ingress-from-iap \
  --direction=INGRESS \
  --action=allow \
  --rules=tcp:PORT \
  --source-ranges=35.235.240.0/20

where PORT is the port used by the protocol.

Note: The default-allow-ssh and default-allow-rdp default rules allow SSH and RDP connections from all IP addresses, not only from IAP. Consider disabling or deleting these rules if you want to prevent direct SSH or RDP access to your VM instances.

Grant permissions to use IAP

To control which users and groups are allowed to use IAP TCP forwarding and which VM instances they're allowed to connect to, configure Identity and Access Management (IAM) permissions.

You can grant a user or group access to all VM instances in a project by configuring IAM permissions on the project level:

Console

1. Open the IAM & Admin page in the Cloud Console.

   Open the IAM & Admin page

2. Click Add and configure the following:

   • New members: Specify the user or group you want to grant access.
   • Select a role Select Cloud IAP > IAP-Secured Tunnel User.

3. Click Save.

gcloud

Grant the iap.tunnelResourceAccessor role to the user:

gcloud projects add-iam-policy-binding PROJECT_ID \
    --member=user:EMAIL \
    --role=roles/iap.tunnelResourceAccessor

Replace the following:

• PROJECT_ID: ID of the project
• EMAIL: email address of the user you want to grant access, for example [e-mail].

API

To edit your application's policy.json file, follow the process below. See Managing access to IAP-secured resources for more information about using the IAM API to manage access policies.

1. Download the credentials file for your service account.

   1. Go to the Service accounts page.
      Go to the service accounts page

   2. Click the email address of your service account.

   3. Click Edit.

   4. Click Create key.

   5. Select JSON as your key type.

   6. Create a new key by clicking Create and closing the confirmation window that appears.

   Your JSON credentials file has now been downloaded.

2. Export the following variables.

   export IAP_BASE_URL=https://iap.googleapis.com/v1/projects/PROJECT_NUMBER/iap_tunnel
   # Replace with the path to your local service account's downloaded JSON file
   export JSON_CREDS=EXAMPLE.IAM.GSERVICEACCOUNT.COM.JSON
   # Replace POLICY_FILE.JSON with the name of JSON file to use for setIamPolicy
   export JSON_NEW_POLICY=POLICY_FILE.JSON
   

3. Convert your service account credentials JSON file into an OAuth access token using Oauth2l by running the following command:

   oauth2l header --json ${JSON_CREDS} cloud-platform
   
   

4. If this is your first time running the above command, when prompted:

   1. Get the verification code by clicking the displayed link and copying the code.
   2. Paste the verification code into your app prompt.
   3. Copy the returned bearer token.
   4. Export a new variable that's assigned to the value of your returned bearer token.

      export CLOUD_OAUTH_TOKEN=AUTHORIZATION_BEARER_TOKEN

5. If you've run this command before, export the following variable.

   export CLOUD_OAUTH_TOKEN="$(oauth2l header --json ${JSON_CREDS} cloud-platform)"

6. Get the IAM policy for the Compute Engine instance using the getIamPolicy method. The empty data bit at the end turns the curl request into POST instead of GET.

   curl -i -H "${CLOUD_OAUTH_TOKEN}" \
        ${IAP_BASE_URL}/zones/ZONE_NAME/instances/INSTANCE_ID or INSTANCE_NAME:getIamPolicy \
        -d ''

7. Grant the iap.tunnelResourceAccessor role to your members by modifying the IAM policy JSON file.
   

8. Optionally, add member restrictions based on IAM Conditions and access levels.

   The following is an example of an edited policy.json file that binds the iap.tunnelResourceAccessor role to a group of VM instance admins, granting them access to IAP-secured tunnel resources. An IAM condition has been added to make the resources accessible only to members in the VM instance admins group with a private IP address of 10.0.0.1 on port 22 using the destination.ip and destination.port IAM Conditions. They must also meet the requirements of the ACCESS_LEVEL_NAME access level.

   Note that if a member has the Owner role, they have permission to use IAP for TCP forwarding.

   
   Example policy.json file

   {
     "policy": {
       "bindings": [
         {
           "role": "roles/iap.tunnelResourceAccessor",
           "members": ["group:[e-mail]"],
           "condition": {
             "expression": "\"accessPolicies/POLICY_NAME/accessLevels/ACCESS_LEVEL_NAME\" in request.auth.access_levels && destination.ip == \"10.0.0.1\" && destination.port == 22",
             "title": "CONDITION_NAME"
           }
         }
       ]
     }
   }

   To find a policy name , call accessPolicies.list:

   GET https://accesscontextmanager.googleapis.com/v1/accessPolicies
   

9. Set your new policy.json file using the setIamPolicy method.

   curl -i -H "Content-Type:application/json" \
             -H "$(oauth2l header --json ${JSON_CREDS} cloud-platform)" \
             ${IAP_BASE_URL}/zones/ZONE_NAME/instances/INSTANCE_ID or INSTANCE_NAME:setIamPolicy \
             -d @${JSON_NEW_POLICY}
   

Note: Users with Owner access to a project always have permission to use IAP for TCP forwarding.

Alternatively, you can also configure IAM permissions individually by VM:

Console

1. Open the IAP admin page and select the SSH and TCP Resources tab.

   Open the IAP admin page

2. Select the VM instances that you want to configure.
3. Click Show info panel if the info panel is not visible.

4. Click Add member and configure the following:

   • New members: Specify the user or group you want to grant access.
   • Select a role Select Cloud IAP > IAP-Secured Tunnel User.

5. Optionally, click Add condition and configure a member restriction:

   • Title: Enter a name for the restriction.
   • Expression: Enter a condition that a user must meet before being allowed to use IAM TCP forwarding.

   For example, the following CEL expression restricts access to port 22:

   destination.port == 22
   

   You can also restrict access by access level:

   destination.port == 22 && "FULL_ACCESS_LEVEL_NAME" in request.auth.access_levels
   

   Where FULL_ACCESS_LEVEL_NAME is an existing access level and uses the format accessPolicies/POLICY_NAME/accessLevels/ACCESS_LEVEL_NAME.

6. Click Save.

Tunneling SSH connections

You can connect to Linux instances that don't have a public IP address by tunneling SSH traffic through IAP:

Console

To connect to your instance, use the SSH button in the Cloud Console. Your instance's access configuration (defined through IAM permissions) must allow TCP tunneling through IAP.

gcloud

To connect to your instance, use the gcloud compute ssh command. Your instance's access configuration (defined through IAM permissions) must allow TCP tunneling through IAP.

gcloud compute ssh INSTANCE_NAME

Replace INSTANCE_NAME with the name of the instance to SSH into.

If the instance doesn't have a public IP address, the connection automatically uses IAP TCP tunneling. If the instance does have a public IP address, the connection uses the public IP address instead of IAP TCP tunneling.

You can use the --tunnel-through-iap flag so that gcloud compute ssh always uses IAP TCP tunneling.

Use the --internal-ip flag so that gcloud compute ssh never uses IAP TCP tunneling and instead directly connects to the internal IP of the VM. Doing so is useful for clients that are connected to the same VPC network as the target VM.

Note: The gcloud tool requires you to specify the instance you want to connect to. To tunnel using gcloud, you need to provide the name of the instance.

Tunneling RDP connections

You can connect to Windows instances that don't have a public IP address by tunneling RDP traffic through IAP:

IAP Desktop

You can use IAP Desktop to connect to the Remote Desktop of one or more VM instances by using IAP TCP forwarding.

1. In the application, select File > Add Google Cloud project.

2. Enter the ID or name of your project and click OK.

3. In the Project Explorer window, right-click the VM instance you want to connect to and select Connect.

For more information on IAP Desktop, see the GitHub project page.

Note: IAP Desktop is an open-source project and not an officially supported Google product.

gcloud

To connect to the Remote Desktop of a VM instance, you first create a tunnel.

1. Use the gcloud compute start-iap-tunnel command to create an encrypted tunnel to the RDP port of the VM instance.

   gcloud compute start-iap-tunnel INSTANCE_NAME 3389 \
       --local-host-port=localhost:LOCAL_PORT \
       --zone=ZONE
   

   Replace INSTANCE_NAME with the name of the VM instance you want to connect to. Replace LOCAL_PORT with the localhost port where you want the proxy to be bound or use 0 to have an unused one selected automatically. Replace ZONE with the zone where the VM instance is located.

2. gcloud performs a connectivity test with the VM instance, then opens a tunnel and shows a port number.

   Listening on port [LOCAL_PORT].
   

   All traffic sent to localhost:LOCAL_PORT is forwarded to the VM instance. The port is only accessible by applications running on your local computer.

3. Leave gcloud running and open the Microsoft Windows Remote Desktop Connection app.

4. Enter the tunnel endpoint as computer name:

   localhost:LOCAL_PORT
   

   Replace LOCAL_PORT with the port number shown when the tunnel was opened by gcloud.

5. Click Connect.

Note: Because you are instructing the client to connect to localhost instead of the VM instance name, you might see a warning indicating that the identity of the remote computer cannot be verified.

Tunneling other TCP connections

You can use IAP TCP forwarding for other TCP-based protocols by using the gcloud compute start-iap-tunnel command to allocate a local port. The local port tunnels data traffic from the local machine to the remote machine in an HTTPS stream. IAP then receives the data, applies access controls, and forwards the unwrapped data to the remote port. Conversely, any data from the remote port is also wrapped before it's sent to the local port where it's then unwrapped.

gcloud

Create an encrypted tunnel to a port of the VM instance:

gcloud compute start-iap-tunnel INSTANCE_NAME INSTANCE_PORT \
    --local-host-port=localhost:LOCAL_PORT \
    --zone=ZONE

Replace INSTANCE_NAME and INSTANCE_PORT with the name and port of the VM instance you want to connect to. Replace LOCAL_PORT with the localhost port where you want the proxy to be bound. Replace ZONE with the zone where the VM instance is located.

gcloud performs a connectivity test with the VM instance, then opens a tunnel and shows a port number.

Listening on port [LOCAL_PORT].

All traffic sent to localhost:LOCAL_PORT is forwarded to the VM instance. The port is only accessible by applications running on your local computer.

Known limitations

Bandwidth: IAP's TCP forwarding feature isn't intended for bulk transfer of data. IAP reserves the right to rate-limit users abusing this service.

Connection length: IAP automatically disconnects sessions after 1 hour of inactivity. We recommend having logic in your applications to handle reestablishing a tunnel when it becomes disconnected.

Next steps

• See access requests by enabling Cloud Audit Logs.

• Configure VPC Service Controls to protect your project in conjunction with IAP for TCP.