This page shows you troubleshooting steps that you might find helpful if you run into problems using Filestore.
- Ensure that you are using the recommended machine type for the client VM.
If your client VM is running Linux, confirm that you're using the default mount options.
Ensure that the client VM is located in the same region as the Filestore instance. Mounting across regions not only reduces performance, it also incurs a networking cost.
Ensure that your Filestore instance isn't at or near full capacity. When capacity is nearly full, any remaining space is highly fragmented, causing read and write operations to slow down. The amount of free space needed to avoid this scenario is case-dependent. We recommend setting up low disk space alerts.
Test the performance of your Filestore instance using the
If the test results show abnormally slow performance, contact your account representative. If the test results show similar or greater performance than expected, continue to the next section.
Use cases that cause slow performance
Here are some use cases and scenarios that cause poor performance:
Workloads involving high volumes of small files
Filestore file shares use the
sync export option for data safety
and NFS protocol compliance. For most data-modifying operations, the
Filestore instance waits for the data to be committed to storage
before replying to requests from the client VM. When many files are involved in
an operation, the client makes a long series of synchronous operations and the
cumulative latency adds up.
An example of this scenario is when you extract an archive on the file share, like tar files. TAR makes many synchronous operations in a series when extracting an archive containing many files. As a result, performance is reduced.
If you're trying to copy many small files to a file share, try parallelizing
file creation with a tool like
mkdir -p /mnt/nfs/many_files_rsync/ time gsutil -m -q rsync -rp many_files /mnt/nfs/many_files_rsync/
Copying data between Cloud Storage and Filestore
Copying data from Cloud Storage to a Filestore instance using gsutil is known to be slow. There is no known mitigation.
Latency when mounting and unmounting a file share
When mounting a file share using the default mount options, the mount command attempts to discover the supported transport method of the Filestore instance, which introduces a three-second latency.
mountd daemon first tries to use UDP, which Filestore doesn't
support. Once the initial try times out, it falls back to TCP. To bypass this
discovery process and eliminate the added latency, you can specify the
mount option, for example:
sudo mount -o tcp 10.0.0.2:/vol1 /mnt/nfs
This mount option is especially important if you're
Filestore is unresponsive
Filestore instance not responding to
Filestore instances do not respond to
requests because Filestore doesn't allow ICMP.
To test for connectivity to a Filestore instance, you can run
showmount from the client:
sudo showmount -e filestore-ip
The Filestore instance responds with its exported file system, for example:
Export list for 10.139.19.98: /vol1 192.168.0.0/16,172.16.0.0/12,10.0.0.0/8
You can also check whether the client can reach Filestore's RPC information by running:
sudo rpcinfo -p <filestore-ip>
The response looks like:
program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 2046 status 100024 1 tcp 2046 status 100003 3 tcp 2049 nfs 100227 3 tcp 2049 100021 1 udp 4045 nlockmgr 100021 3 udp 4045 nlockmgr 100021 4 udp 4045 nlockmgr 100021 1 tcp 4045 nlockmgr 100021 3 tcp 4045 nlockmgr 100021 4 tcp 4045 nlockmgr 100005 3 udp 2050 mountd 100005 3 tcp 2050 mountd
Once in a while, Filestore becomes unresponsive for a few minutes and then becomes responsive again because of a scheduled maintenance event. For Filestore's SLA, see the SLA page.
Filestore does not support customer-defined maintenance windows. The schedule for maintenance windows for Filestore is also unavailable to customers.
Instance was deleted while still mounted to the client
If a file operation or unix command like
ls, or any read/write operation
stops responding, then the Filestore instance was likely deleted
while still mounted to the client.
Check to see if the instance still exists:
gcloud filestore instances list
If the instance is no longer listed, you can recover control by creating a new instance with the same IP address and file share name as the instance that was deleted. Once the instance is created, the unresponsive operation exits with an error. If you don't need the Filestore instance, you can unmount the file share and delete it.
To prevent something like this from happening in the future, make sure you unmount the Filestore instance first before deleting it.
Instance shows status
The Filestore instance is in an unhealthy state from internal causes beyond the user's control and is automatically repairing itself. The instance is unavailable during this time and you don't need to take any further actions.
"No space left on device"
Check if the Filestore instance has sufficient inodes by running the following command on the client VM:
The command returns something similar to the following:
Filesystem Inodes IUsed IFree IUse% Mounted on 10.0.0.2:/vol1 134217728 13 134217715 1% /mnt/test
Each file stored on the file share consumes one inode. If
IUse% reaches 100%,
you are not able to store more files on the file share even if you haven't
reached the maximum allocated capacity. The number of inodes scales with
capacity. If you want to add more inodes, you must add more capacity.
'df' and 'du' commands report different amounts of free disk space
When a file that is open by a running process is deleted, the disk space that
the file consumes does not get freed until the file is closed. The
accounts for the space consumed by deleted open files, whereas the
does not. This difference in calculation is why the
du command often shows
more free space than
To display the deleted files that are still open by a running process, run:
lsof | grep deleted
Unable to create an instance
PERMISSION DENIED when creating a Filestore instance
Check if the Filestore API is enabled:
gcloud services enable file.googleapis.com
Check if you have the
roles/file.editorrole. For details see IAM roles and permissions.
If you are still encountering the error, then the Filestore service account might have had its
file.serviceAgentrole removed. To check if this is the case, run:
gcloud projects get-iam-policy project-id-or-number \ --flatten="bindings.members" \ --format='table(bindings.role)' \ --filter="bindings.members:email@example.com"
- project-id-or-number is the ID or number of your Google Cloud project.
- project-number is the number of your Google Cloud project.
The command should return something similar to the following:
roles/file.serviceAgentis not listed, you can restore it by running:
gcloud projects add-iam-policy-binding project-id-or-number \ --member serviceAccount:firstname.lastname@example.org \ --role roles/file.serviceAgent
Receiving an error code 13 when creating an instance
There are a few possible causes for error code 13 errors during instance creation, but the most common cause is Filestore reaching an internal network quota.
For every VPC network that you create a Filestore instance on, Filestore must create an internal network that peers with that network. These internal networks are preserved even when the Filestore instances and VPC networks associated with them are deleted.
Once the number of internal networks reaches 49 for a project, Filestore is no longer able to create new internal networks, which prevents you from creating Filestore instances on new VPC networks. Attempting to do so results in an error:
Error code 13, message: an internal error has occurred
The only way you can clear the internal networks is to disable and then re- enable the Filestore API. Before you can disable the API, you must delete all Filestore related resources, such as Filestore instances and backups.
gcloud services disable file.googleapis.com gcloud services enable file.googleapis.com
If you can't disable the API because you have Filestore instances that you need and cannot delete, then you must contact your account representative to have the peered networks cleared manually.
If you need to regularly delete and create VPC networks and Filestore instances, there are two ways to avoid running out of network quota:
When you create a VPC network, use the same name as a previous network that's been used for Filestore instance creation.
Cycle through a pool of no more than 49 VPC networks instead of deleting and then recreating them.
Unable to mount file share
My VM or GKE pod can't access Filestore
Confirm whether the Filestore instance is reachable (
traceroute are not supported) by running:
sudo showmount -e <filestore-ip>
The command should respond with a list of exported file systems. Then check whether the client can reach Filestore's RPC information by running:
sudo rpcinfo -p <filestore-ip>
If the Filestore instance is not reachable, common causes include improperly configured network settings or ACL settings, or you are attempting to mount the wrong instance.
- Check whether IP-based access control is enabled and check whether the IP address of the client is restricted. The details can be found here.
- Check your firewall settings to make sure that the required ports are open. For details, see Configuring firewall rules.
- If you're trying to access Filestore from a GKE
cluster, and are getting the error
mount.nfs: access denied by server while mounting ..., see Unable to access file share from GKE clusters.
Permission denied when trying to mount a file share
Confirm whether there are any NFS Export Options listed for the instance:
gcloud filestore instances describe instance-id \ --zone=zone
- instance-id is the instance ID of the Filestore.
- zone is the zone where the Filestore instance resides.
The command returns something similar to:
createTime: '2019-10-11T17:28:23.340943077Z' fileShares: - capacityGb: '1024' name: vol1 nfsExportOptions: - accessMode: READ_WRITE ipRanges: - 126.96.36.199/29 squashMode: NO_ROOT_SQUASH name: projects/yourproject/locations/us-central1-c/instances/nfs-server networks: - ipAddresses: - 10.0.0.2 modes: - MODE_IPV4 network: default reservedIpRange: 10.0.0.0/29 state: READY tier: BASIC_HDD
If you find
nfsExportOptions listed, check if the IP address of your client is
within one of the ranges listed under
ipRanges for the expected
If it isn't, you must
edit the NFS Export Options.
Unable to mount a file share to App Engine
Filestore does not support App Engine.
Unable to mount a file share from a GKE cluster
You cannot directly mount Filestore file shares to GKE clusters. Instead, you must configure a PV and a PVC.
Unable to access file share from GKE clusters
Error: Output: mount.nfs: access denied by server while mounting x.x.x.x:/file-share-name
Make sure that the values of the PV
with the name of the file share and the IP address of the Filestore
If your file share is named
vol1 and the IP address of the
Filestore instance is
10.0.0.2, the PV
spec.nfs.server must match those values:
apiVersion: v1 kind: PersistentVolume metadata: name: fileserver spec: capacity: storage: 2T accessModes: - ReadWriteMany nfs: path: /vol1 server: 10.0.0.2
Filestore API cannot be disabled
Make sure that all of your Filestore related resources, such as Filestore instances and backups, are deleted. You cannot disable the Filestore API while Filestore instances are deployed.
Failed to create subnetwork. Couldn't find free blocks in allocated IP ranges.
For a given private connection, if you exhaust your allocated IP address
space, Google Cloud returns this error:
Failed to create subnetwork.
Couldn't find free blocks in allocated IP ranges.
For details on how to resolve this issue, see IP address range exhaustion.