Cloud Data Loss Prevention (Cloud DLP) fait désormais partie de la protection des données sensibles. Le nom de l'API reste le même: API Cloud Data Loss Prevention (API DLP). Pour en savoir plus sur les services qui composent la protection des données sensibles, consultez Présentation de la protection des données sensibles.

Personnaliser la probabilité de correspondance

À l'aide de règles relatives aux mots clés, vous pouvez étendre les détecteurs d'infoTypes intégrés et personnalisés à l'aide de règles de contexte puissantes. Une règle relative aux mots clés indique à la protection des données sensibles d'ajuster la probabilité d'un résultat, selon qu'un mot clé apparaît à proximité ou non de ce résultat. Une règle relative aux mots clés est un type de règle d'inspection spécifié dans des ensembles de règles. Chaque règle est appliquée à un ensemble d'infoTypes intégrés ou personnalisés.

Anatomie d'une règle relative aux mots clés

Un détecteur d'infoType peut avoir zéro règle relative aux mots clés ou plus. Dans votre configuration d'inspection, vous définissez chaque objet HotwordRule dans le tableau rules, comme suit :

"rules":[
  {
    "hotwordRule":{
      "hotwordRegex":{
        "pattern":"REGEX_PATTERN"
      },
      "proximity":{
        "windowAfter":"NUM_CHARS_TO_CONSIDER_AFTER_FINDING",
        "windowBefore":"NUM_CHARS_TO_CONSIDER_BEFORE_FINDING"
      }
      "likelihoodAdjustment":{
        "fixedLikelihood":"LIKELIHOOD_VALUE"
             -- OR --
        "relativeLikelihood":"LIKELIHOOD_ADJUSTMENT"
      },
    }
  },
  ...
]

Remplacez les éléments suivants :

REGEX_PATTERN : expression régulière (objet Regex) qui définit ce qui doit être considéré comme un mot clé.
NUM_CHARS_TO_CONSIDER_AFTER_FINDING : plage de caractères après le résultat. La protection des données sensibles analyse cette plage pour déterminer si un mot clé apparaît à proximité du résultat.
NUM_CHARS_TO_CONSIDER_BEFORE_FINDING : plage de caractères avant le résultat. La protection des données sensibles analyse cette plage pour déterminer si un mot clé apparaît à proximité du résultat.
LIKELIHOOD_VALUE : niveau de probabilité Likelihood fixe à appliquer au résultat.
LIKELIHOOD_ADJUSTMENT: nombre indiquant dans quelle mesure la protection des données sensibles doit augmenter ou diminuer la probabilité du résultat. Un entier positif augmente le niveau de probabilité et un entier négatif le diminue. Par exemple, si un résultat est POSSIBLE sans appliquer la règle de détection et que la valeur de relativeLikelihood est égale à 1, le résultat est mis à niveau vers LIKELY (probable). Si la valeur de relativeLikelihood est -1, le résultat passe à UNLIKELY (peu probable). La probabilité ne peut jamais être inférieure à VERY_UNLIKELY ou dépasser VERY_LIKELY. Dans ce cas, le niveau de probabilité reste le même. Par exemple, si la probabilité de base est VERY_LIKELY (très probable) et que la valeur de relativeLikelihood est 1, la probabilité finale reste de VERY_LIKELY.

Exemple de mot clé : identifier des numéros de dossiers médicaux

Supposons que vous souhaitiez détecter un infoType personnalisé tel qu'un numéro de dossier médical (MRN) sous la forme "###-#-{9}". Vous souhaitez également que la protection des données sensibles augmente la probabilité de correspondance de chaque résultat qui suit le mot clé "MRN".

Exemples de valeur :

123-4-56789 générerait une correspondance de probabilité POSSIBLE ;
MRN 123-4-56789 générerait une correspondance de probabilité VERY_LIKELY.

L'exemple JSON et les extraits de code ci-dessous vous montrent comment configurer la règle relative aux mots clés. Cet exemple utilise un détecteur d'expressions régulières personnalisé.

Dans cet exemple, notez les points suivants :

La requête définit l'infoType personnalisé C_MRN, qui est un détecteur pour toute chaîne correspondant à l'expression régulière [0-9]{3}-[0-9]{1}-[0-9]{5}.
L'expression régulière (?i)(mrn|medical)(?-i) définit le mot clé. Le service de protection des données sensibles recherche ce mot clé dans la plage de caractères définie dans le champ proximity.
Pour chaque résultat C_MRN comportant un mot clé dans l'ensemble proximity, la protection des données sensibles définit le niveau de probabilité sur VERY_LIKELY.

C#

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Pour vous authentifier auprès de la protection des données sensibles, configurez les Identifiants par défaut de l'application. Pour en savoir plus, consultez Configurer l'authentification pour un environnement de développement local.

Afficher sur GitHub Commentaires


using System;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectDataWithHotwordRule
{
    public static InspectContentResponse InspectDataHotwordRule(
        string projectId,
        string text,
        string customRegex,
        string hotwordRegex,
        InfoType infoType = null)
    {
        // Instantiate dlp client.
        var dlp = DlpServiceClient.Create();

        // Construct the content item.
        var contentItem = new ContentItem
        {
            ByteItem = new ByteContentItem
            {
                Type = ByteContentItem.Types.BytesType.TextUtf8,
                Data = Google.Protobuf.ByteString.CopyFromUtf8(text)
            }
        };

        // Construct the info type if null.
        var infotype = infoType ?? new InfoType { Name = "C_MRN" };

        // Construct the custom regex detector.
        var customInfoType = new CustomInfoType
        {
            InfoType = infotype,
            Regex = new Regex { Pattern = customRegex },
            Likelihood = Likelihood.Possible
        };

        // Construct hotword rule.
        var hotwordRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new Regex { Pattern = hotwordRegex },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment
            {
                FixedLikelihood = Likelihood.VeryLikely
            },
            Proximity = new DetectionRule.Types.Proximity
            {
                WindowBefore = 10
            }
        };

        // Construct the rule set for the inspect config.
        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infotype },
            Rules =
            {
                new InspectionRule
                {
                    HotwordRule = hotwordRule
                }
            }
        };

        // Construct the inspect config.
        var inspectConfig = new InspectConfig
        {
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet },
        };

        // Construct the request.
        var request = new InspectContentRequest
        {
            ParentAsLocationName = new LocationName(projectId, "global"),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        // Call the API.
        var response = dlp.InspectContent(request);

        // Inspect the response.
        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("Quote: " + f.Quote);
            Console.WriteLine("Info type: " + f.InfoType.Name);
            Console.WriteLine("Likelihood: " + f.Likelihood);
        }
        return response;
    }
}

Go

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectWithHotWordRules inspects data with hot word rule, it uses custom
// regex with a hot word rule to increase the likelihood match
func inspectWithHotWordRules(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "Patient's MRN 444-5-22222 and just a number 333-2-33333"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Construct the custom regex detectors
	customInfoType := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: "C_MRN",
		},
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: "[1-9]{3}-[1-9]{1}-[1-9]{5}",
			},
		},
		Likelihood: dlppb.Likelihood_POSSIBLE,
	}

	// Construct hotword rule.
	hotWordRule := &dlppb.CustomInfoType_DetectionRule_HotwordRule{
		HotwordRegex: &dlppb.CustomInfoType_Regex{
			Pattern: "(?i)(mrn|medical)(?-i)",
		},
		Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
			WindowBefore: int32(10),
		},
		LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
			Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
				FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
			},
		},
	}

	inspectionRuleSet := &dlppb.InspectionRuleSet{
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_HotwordRule{
					HotwordRule: hotWordRule,
				},
			},
		},
		InfoTypes: []*dlppb.InfoType{
			customInfoType.InfoType,
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfoType,
			},
			RuleSet: []*dlppb.InspectionRuleSet{
				inspectionRuleSet,
			},
			IncludeQuote: true,
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "InfoType Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectWithHotwordRules {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Patient's MRN 444-5-22222 and just a number 333-2-33333";
    String customRegexPattern = "[1-9]{3}-[1-9]{1}-[1-9]{5}";
    String hotwordRegexPattern = "(?i)(mrn|medical)(?-i)";
    inspectWithHotwordRules(projectId, textToInspect, customRegexPattern, hotwordRegexPattern);
  }

  // Inspects a BigQuery Table
  public static void inspectWithHotwordRules(
      String projectId, String textToInspect, String customRegexPattern, String hotwordRegexPattern)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the regex pattern the inspection will look for.
      Regex regex = Regex.newBuilder().setPattern(customRegexPattern).build();

      // Construct the custom regex detector.
      InfoType infoType = InfoType.newBuilder().setName("C_MRN").build();
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder().setInfoType(infoType).setRegex(regex).build();

      // Specify hotword likelihood adjustment.
      LikelihoodAdjustment likelihoodAdjustment =
          LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY).build();

      // Specify a window around a finding to apply a detection rule.
      Proximity proximity = Proximity.newBuilder().setWindowBefore(10).build();

      // Construct hotword rule.
      HotwordRule hotwordRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern(hotwordRegexPattern).build())
              .setLikelihoodAdjustment(likelihoodAdjustment)
              .setProximity(proximity)
              .build();

      // Construct rule set for the inspect config.
      InspectionRuleSet inspectionRuleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(infoType)
              .addRules(InspectionRule.newBuilder().setHotwordRule(hotwordRule))
              .build();

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .setMinLikelihood(Likelihood.POSSIBLE)
              .addRuleSet(inspectionRuleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Patients MRN 444-5-22222';

// The minimum likelihood required before returning a match
// const minLikelihood = DLP.protos.google.privacy.dlp.v2.Likelihood.POSSIBLE;

// The maximum number of findings to report per request (0 = server maximum)
// const maxFindings = 0;

// The infoTypes of information to match
// See https://cloud.google.com/dlp/docs/concepts-infotypes for more information
// about supported infoTypes.
// const infoTypes = [{ name: 'EMAIL_ADDRESS' }];

// The customInfoTypes of information to match
// const customInfoTypes = [{ infoType: { name: 'DICT_TYPE' }, dictionary: { wordList: { words: ['foo', 'bar', 'baz']}}},
//   { infoType: { name: 'REGEX_TYPE' }, regex: {pattern: '\\(\\d{3}\\) \\d{3}-\\d{4}'}}];

// Whether to include the matching string
// const includeQuote = true;

// Custom hotword regex patten
// const hotwordRegexPattern = '(?i)(mrn|medical)(?-i)';

async function inspectWithHotwordRule() {
  // Construct item to inspect
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Construct a hot word rule
  const hotwordRule = {
    hotwordRegex: {
      pattern: hotwordRegexPattern,
    },
    proximity: {
      windowBefore: 10,
    },
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  // Construct a hotword inspection rule
  const inpectionRuleSet = [
    {
      infoTypes: customInfoTypes.map(
        customInfoType => customInfoType.infoType
      ),
      rules: [{hotwordRule: hotwordRule}],
    },
  ];

  // Assigns likelihood to each match
  customInfoTypes = customInfoTypes.map(customInfoType => {
    customInfoType.likelihood =
      DLP.protos.google.privacy.dlp.v2.Likelihood.POSSIBLE;
    return customInfoType;
  });

  // Construct request
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: {
      infoTypes: infoTypes,
      customInfoTypes: customInfoTypes,
      minLikelihood: minLikelihood,
      includeQuote: includeQuote,
      limits: {
        maxFindingsPerRequest: maxFindings,
      },
      ruleSet: inpectionRuleSet,
    },
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log('Findings:');
    findings.forEach(finding => {
      if (includeQuote) {
        console.log(`\tQuote: ${finding.quote}`);
      }
      console.log(`\tInfo type: ${finding.infoType.name}`);
      console.log(`\tLikelihood: ${finding.likelihood}`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectWithHotwordRule();

PHP

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;

/**
 * Inspect data with a hotword rule
 * This sample uses a custom regex with a hotword rule to increase the likelihood of match.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_hotword_rule(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = "Patient's MRN 444-5-22222 and just a number 333-2-33333"
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the regex pattern the inspection will look for.
    $customRegexPattern = '[1-9]{3}-[1-9]{1}-[1-9]{5}';
    $hotwordRegexPattern = '(?i)(mrn|medical)(?-i)';

    // Construct the custom regex detector.
    $cMrnDetector = (new InfoType())
        ->setName('C_MRN');
    $customInfoType = (new CustomInfoType())
        ->setInfoType($cMrnDetector)
        ->setLikelihood(Likelihood::POSSIBLE)
        ->setRegex((new Regex())
            ->setPattern($customRegexPattern));

    // Specify hotword likelihood adjustment.
    $likelihoodAdjustment = (new LikelihoodAdjustment())
        ->setFixedLikelihood(Likelihood::VERY_LIKELY);

    // Specify a window around a finding to apply a detection rule.
    $proximity = (new Proximity())
        ->setWindowBefore(10);

    $hotwordRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern($hotwordRegexPattern))
        ->setLikelihoodAdjustment($likelihoodAdjustment)
        ->setProximity($proximity);

    // Construct rule set for the inspect config.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$cMrnDetector])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($hotwordRule)
        ]);

    // Construct the configuration for the Inspect request.
    $inspectConfig = (new InspectConfig())
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires

import google.cloud.dlp

def inspect_data_w_custom_hotwords(
    project: str,
    content_string: str,
) -> None:
    """Uses the Data Loss Prevention API to analyze string with medical record
       number custom regex detector, with custom hotwords rules to boost finding
       certainty under some circumstances.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector info type called "C_MRN",
    # with ###-#-##### pattern, where each # represents a digit from 1 to 9.
    # The detector has a detection likelihood of POSSIBLE.
    custom_info_types = [
        {
            "info_type": {"name": "C_MRN"},
            "regex": {"pattern": "[1-9]{3}-[1-9]{1}-[1-9]{5}"},
            "likelihood": google.cloud.dlp_v2.Likelihood.POSSIBLE,
        }
    ]

    # Construct a rule set with hotwords "mrn" and "medical", with a likelohood
    # boost to VERY_LIKELY when hotwords are present within the 10 character-
    # window preceding the PII finding.
    hotword_rule = {
        "hotword_regex": {"pattern": "(?i)(mrn|medical)(?-i)"},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
        "proximity": {"window_before": 10},
    }

    rule_set = [
        {"info_types": [{"name": "C_MRN"}], "rules": [{"hotword_rule": hotword_rule}]}
    ]

    # Construct the configuration dictionary with the custom regex info type.
    inspect_config = {
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Pour découvrir comment utiliser le format JSON avec l'API DLP, consultez le démarrage rapide JSON.

Méthode HTTP et URL :

POST https://dlp.googleapis.com/v2/projects/PROJECT_ID/content:inspect

Remplacez PROJECT_ID par l'ID du projet.

Entrée JSON :

{
  "item":{
    "value":"Patient's MRN 444-5-22222 and just a number 333-2-33333"
  },
  "inspectConfig":{
    "customInfoTypes":[
      {
        "infoType":{
          "name":"C_MRN"
        },
        "regex":{
          "pattern":"[0-9]{3}-[0-9]{1}-[0-9]{5}"
        },
        "likelihood":"POSSIBLE",
      }
    ],
    "ruleSet":[
        {
        "infoTypes": [{"name" : "C_MRN"}],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"(?i)(mrn|medical)(?-i)"
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              },
              "proximity":{
                "windowBefore":10
              }
            }
          }
        ]
      }
    ]
  }
}

Sortie JSON (abrégée) :

{
  "result": {
    "findings": [
      {
        "infoType": {
          "name": "C_MRN"
        },
        "likelihood": "VERY_LIKELY",
        "location": {
          "byteRange": {
            "start": "14",
            "end": "25"
          },
          "codepointRange": { ... }
        }
      },
      {
        "infoType": {
          "name": "C_MRN"
        },
        "likelihood": "POSSIBLE",
          "byteRange": {
            "start": "44",
            "end": "55"
          },
          "codepointRange": { ... }
        }
      }
    ]
  }
}

Le résultat montre que la protection des données sensibles a correctement identifié le numéro du dossier médical à l'aide du détecteur d'infoType personnalisé C_MRN. En outre, en raison de la correspondance de contexte dans la règle relative aux mots clés, la protection des données sensibles a attribué le premier résultat (qui comporte un numéro de dossier médical dans l'ensemble proximity) une probabilité de VERY_LIKELY, telle que configurée. Le deuxième résultat n'ayant pas le même contexte, la valeur de likelihood est restée à POSSIBLE.

Exemple de mot clé : Définir la probabilité de correspondance d'une colonne de table

Cet exemple montre comment définir la probabilité de correspondance d'une colonne de données entière. Cette approche est utile, par exemple, si vous souhaitez exclure une colonne de données des résultats d'inspection.

Prenons l'exemple de table suivant. Une colonne contient des numéros de sécurité sociale (SSN) factices, et une autre contient de véritables numéros de sécurité sociale.

Faux numéro de sécurité sociale	Véritable numéro de sécurité sociale
111-11-1111	222-22-2222

Pour minimiser le bruit dans les résultats d'inspection, vous pouvez exclure tous les résultats de la colonne Fake Social Security Number. Attribuez un niveau de probabilité faible à cette colonne. Configurez ensuite la requête de sorte à ce que les correspondances avec ce niveau de probabilité soient exclues des résultats.

Dans cet exemple, notez les points suivants :

La règle relative aux mots clés est appliquée à l'infoType US_SOCIAL_SECURITY_NUMBER.
L'expression régulière de mot clé (Fake Social Security Number) contient le nom de la colonne comportant les valeurs factices.
La propriété windowBefore est définie sur 1, ce qui signifie que le mot clé se trouve dans un en-tête de colonne et que les résultats doivent se trouver dans la colonne.
Pour chaque résultat US_SOCIAL_SECURITY_NUMBER de cette colonne, la protection des données sensibles définit le niveau de probabilité sur VERY_UNLIKELY.
La propriété minLikelihood est définie sur POSSIBLE, ce qui signifie que tout résultat dont le niveau de probabilité est inférieur à POSSIBLE est exclu des résultats de l'inspection.

Pour découvrir comment utiliser le format JSON avec l'API DLP, consultez le démarrage rapide JSON.

Méthode HTTP et URL :

POST https://dlp.googleapis.com/v2/projects/PROJECT_ID/content:inspect

Remplacez PROJECT_ID par l'ID du projet.

C#

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires



using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using System;
using System.Collections.Generic;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectTableWithCustomHotwords
{
    public static InspectResult InspectTable(
        string projectId,
        Table tableToInspect = null,
        IEnumerable<InfoType> infoTypes = null)
    {
        // Instantiate the dlp client.
        var dlp = DlpServiceClient.Create();

        // Construct the table if null.
        if (tableToInspect == null)
        {
            var row1 = new Value[]
            {
                new Value{ StringValue = "111-11-1111" },
                new Value { StringValue = "222-22-2222" }
            };
            tableToInspect = new Table
            {
                Headers =
                {
                    new FieldId { Name = "Fake Social Security Number" },
                    new FieldId { Name = "Real Social Security Number" }
                },
                Rows =
                {
                    new Table.Types.Row { Values = { row1 } }
                }
            };
        }

        // Specify the table and construct the content item.
        var contentItem = new ContentItem { Table = tableToInspect };

        // Specify the type of info to be inspected.
        var infotypes = infoTypes ?? new InfoType[] { new InfoType { Name = "US_SOCIAL_SECURITY_NUMBER" } };

        // Construct the Inspection Rule Set by specifying the hotword rule as detection rule.
        var ruleSet = new InspectionRuleSet[]
        {
            new InspectionRuleSet
            {
                InfoTypes = { infotypes },
                Rules =
                {
                    new InspectionRule
                    {
                        HotwordRule = new DetectionRule.Types.HotwordRule
                        {
                            HotwordRegex = new Regex
                            {
                                Pattern = "(Fake Social Security Number)"
                            },
                            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment
                            {
                                FixedLikelihood = Likelihood.VeryUnlikely
                            },
                            Proximity = new DetectionRule.Types.Proximity
                            {
                                WindowBefore = 1
                            }
                        }
                    }
                }
            }
        };

        // Construct the request.
        var request = new InspectContentRequest
        {
            InspectConfig = new InspectConfig
            {
                InfoTypes = { infotypes },
                IncludeQuote = true,
                MinLikelihood = Likelihood.Possible,
                RuleSet = { ruleSet }
            },
            ParentAsLocationName = new LocationName(projectId, "global"),
            Item = contentItem
        };

        // Call the API.
        InspectContentResponse response = dlp.InspectContent(request);

        // Inspect the results.
        var resultFindings = response.Result.Findings;

        Console.WriteLine($"Findings: {resultFindings.Count}");

        foreach (var f in resultFindings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response.Result;
    }
}

Go

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires


import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectTableWithCustomHotword Sets the match likelihood of a table column to customize data inspection results.
// This example showcases how you can adjust the match likelihood for an entire column of data, enabling the
// exclusion of specific columns from inspection if needed.
func inspectTableWithCustomHotword(w io.Writer, projectID, hotwordRegexPattern string) error {
	// projectID := "your-project-id"
	// hotwordRegexPattern := "(Fake Social Security Number)"

	tableToInspect := &dlppb.Table{
		Headers: []*dlppb.FieldId{
			{Name: "Fake Social Security Number"},
			{Name: "Real Social Security Number"},
		},
		Rows: []*dlppb.Table_Row{
			{
				Values: []*dlppb.Value{
					{
						Type: &dlppb.Value_StringValue{StringValue: "111-11-1111"},
					},
					{
						Type: &dlppb.Value_StringValue{StringValue: "222-22-2222"},
					},
				},
			},
		},
	}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify what content you want the service to de-identify.
	contentItem := &dlppb.ContentItem_Table{
		Table: tableToInspect,
	}

	// Specify the likelihood adjustment to adjust the match likelihood for your detection rule
	// based on your needs and desired level of sensitivity in data analysis.
	likelihoodAdjustment := &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
		Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
			FixedLikelihood: dlppb.Likelihood_VERY_UNLIKELY,
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "US_SOCIAL_SECURITY_NUMBER"},
	}

	// Specify the proximity so that It helps identify sensitive information
	// occurring near other data points, enabling more context-aware analysis.
	proximity := &dlppb.CustomInfoType_DetectionRule_Proximity{
		WindowBefore: 5,
	}

	// Construct hotWord rule.
	hotwordRule := &dlppb.CustomInfoType_DetectionRule_HotwordRule{
		HotwordRegex: &dlppb.CustomInfoType_Regex{
			Pattern: hotwordRegexPattern,
		},
		Proximity:            proximity,
		LikelihoodAdjustment: likelihoodAdjustment,
	}

	// Construct rule set for the inspect config.
	inspectionRuleSet := &dlppb.InspectionRuleSet{
		InfoTypes: infoTypes,
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_HotwordRule{
					HotwordRule: hotwordRule,
				},
			},
		},
	}

	// Construct the configuration for the Inspect request.
	config := &dlppb.InspectConfig{
		IncludeQuote:  true,
		InfoTypes:     infoTypes,
		MinLikelihood: dlppb.Likelihood_POSSIBLE,
		RuleSet: []*dlppb.InspectionRuleSet{
			inspectionRuleSet,
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item: &dlppb.ContentItem{
			DataItem: contentItem,
		},
		InspectConfig: config,
	}
	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.FieldId;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.Table;
import com.google.privacy.dlp.v2.Value;
import java.io.IOException;
import java.util.List;
import java.util.stream.Collectors;
import java.util.stream.Stream;

public class InspectTableWithCustomHotword {

  public static void main(String[] args) throws IOException {
    // TODO(developer): Replace these variables before running the sample.
    // The Google Cloud project id to use as a parent resource.
    String projectId = "your-project-id";
    // Specify the table to be considered for de-identification.
    Table tableToDeIdentify =
        Table.newBuilder()
            .addHeaders(FieldId.newBuilder().setName("Some Social Security Number").build())
            .addHeaders(FieldId.newBuilder().setName("Real Social Security Number").build())
            .addRows(
                Table.Row.newBuilder()
                    .addValues(Value.newBuilder().setStringValue("111-11-1111").build())
                    .addValues(Value.newBuilder().setStringValue("222-22-2222").build())
                    .build())
            .build();
    // Specify the regex pattern to be detected.
    // Refer https://github.com/google/re2/wiki/Syntax for creating regular expression.
    String hotwordRegexPattern = "Some Social Security Number";
    inspectDemotingFindingsWithHotwords(projectId, tableToDeIdentify, hotwordRegexPattern);
  }

  //  Inspects the provided table, excluding the findings of entire column matching regular
  // expression.
  public static void inspectDemotingFindingsWithHotwords(
      String projectId, Table tableToDeIdentify, String hotwordRegexPattern) throws IOException {

    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify what content you want the service to de-identify.
      ContentItem contentItem = ContentItem.newBuilder().setTable(tableToDeIdentify).build();

      CustomInfoType.DetectionRule.LikelihoodAdjustment likelihoodAdjustment =
          CustomInfoType.DetectionRule.LikelihoodAdjustment.newBuilder()
              .setFixedLikelihood(Likelihood.VERY_UNLIKELY)
              .build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types
      List<InfoType> infoTypes =
          Stream.of("US_SOCIAL_SECURITY_NUMBER")
              .map(it -> InfoType.newBuilder().setName(it).build())
              .collect(Collectors.toList());

      CustomInfoType.DetectionRule.Proximity proximity =
          CustomInfoType.DetectionRule.Proximity.newBuilder().setWindowBefore(1).build();

      // Construct hotword rule.
      CustomInfoType.DetectionRule.HotwordRule hotwordRule =
          CustomInfoType.DetectionRule.HotwordRule.newBuilder()
              .setHotwordRegex(
                  CustomInfoType.Regex.newBuilder().setPattern(hotwordRegexPattern).build())
              .setLikelihoodAdjustment(likelihoodAdjustment)
              .setProximity(proximity)
              .build();

      // Construct rule set for the inspect config.
      InspectionRuleSet inspectionRuleSet =
          InspectionRuleSet.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addRules(InspectionRule.newBuilder().setHotwordRule(hotwordRule))
              .build();

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder()
              .setIncludeQuote(true)
              .setMinLikelihood(Likelihood.POSSIBLE)
              .addRuleSet(inspectionRuleSet)
              .addAllInfoTypes(infoTypes)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(contentItem)
              .setInspectConfig(config)
              .build();

      InspectContentResponse response = dlp.inspectContent(request);
      // Parse the response and process results.
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under.
// const projectId = "your-project-id";

// Table to inspect
const tableToInspect = {
  headers: [
    {name: 'Fake Social Security Number'},
    {name: 'Real Social Security Number'},
  ],
  rows: [
    {
      values: [{stringValue: '111-11-1111'}, {stringValue: '222-22-2222'}],
    },
  ],
};

async function inspectWithCustomHotwords() {
  // Specify the regex pattern to be detected.
  const hotwordRegexPattern = '(Fake Social Security Number)';

  // Specify what content you want the service to de-identify.
  const contentItem = {
    table: tableToInspect,
  };

  // Specify the type of info the inspection will look for.
  const infoTypes = [{name: 'US_SOCIAL_SECURITY_NUMBER'}];

  // Construct hotword rule.
  const hotwordRule = {
    hotwordRegex: {
      pattern: hotwordRegexPattern,
    },
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_UNLIKELY,
    },
    proximity: {
      windowBefore: 1,
    },
  };

  // Construct rule set for the inspect configuration.
  const inspectionRuleSet = {
    infoTypes: infoTypes,
    rules: [
      {
        hotwordRule: hotwordRule,
      },
    ],
  };

  // Construct the configuration for the Inspect request.
  const config = {
    infoTypes: infoTypes,
    ruleSet: [inspectionRuleSet],
    minLikelihood: DLP.protos.google.privacy.dlp.v2.Likelihood.POSSIBLE,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    item: contentItem,
    inspectConfig: config,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print Findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectWithCustomHotwords();

PHP

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\FieldId;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\Table;
use Google\Cloud\Dlp\V2\Table\Row;
use Google\Cloud\Dlp\V2\Value;

/**
 * Hotword example: Set the match likelihood of a table column.
 * This example demonstrates how you can set the match likelihood of an entire column of data.
 * This approach is helpful, for example, if you want to exclude a column of data from inspection
 * results.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 */
function inspect_column_values_w_custom_hotwords(string $projectId): void
{
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify the table to be inspected.
    $tableToDeIdentify = (new Table())
        ->setHeaders([
            (new FieldId())
                ->setName('Fake Social Security Number'),
            (new FieldId())
                ->setName('Real Social Security Number'),
        ])
        ->setRows([
            (new Row())->setValues([
                (new Value())
                    ->setStringValue('111-11-1111'),
                (new Value())
                    ->setStringValue('222-22-2222')
            ])
        ]);

    $item = (new ContentItem())
        ->setTable($tableToDeIdentify);

    // Specify the regex pattern the inspection will look for.
    $hotwordRegexPattern = 'Fake Social Security Number';

    // Specify hotword likelihood adjustment.
    $likelihoodAdjustment = (new LikelihoodAdjustment())
        ->setFixedLikelihood(Likelihood::VERY_UNLIKELY);

    // Specify a window around a finding to apply a detection rule.
    $proximity = (new Proximity())
        ->setWindowBefore(1);

    // Construct the hotword rule.
    $hotwordRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern($hotwordRegexPattern))
        ->setLikelihoodAdjustment($likelihoodAdjustment)
        ->setProximity($proximity);

    // Construct rule set for the inspect config.
    $infotype = (new InfoType())
        ->setName('US_SOCIAL_SECURITY_NUMBER');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$infotype])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($hotwordRule)
        ]);

    // Construct the configuration for the Inspect request.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$infotype])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet])
        ->setMinLikelihood(Likelihood::POSSIBLE);

    // Run request.
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results.
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Pour savoir comment installer et utiliser la bibliothèque cliente pour la protection des données sensibles, consultez Bibliothèques clientes pour la protection des données sensibles.

Afficher sur GitHub Commentaires

from typing import List

import google.cloud.dlp

def inspect_column_values_w_custom_hotwords(
    project: str,
    table_header: List[str],
    table_rows: List[List[str]],
    info_types: List[str],
    custom_hotword: str,
) -> None:
    """Uses the Data Loss Prevention API to inspect table data using built-in
    infoType detectors, excluding columns that match a custom hot-word.
    Args:
        project: The Google Cloud project id to use as a parent resource.
        table_header: List of strings representing table field names.
        table_rows: List of rows representing table values.
        info_types: The infoType for which hot-word rule is applied.
        custom_hotword: The custom regular expression used for likelihood boosting.
    """

    # Instantiate a client
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct the `table`. For more details on the table schema, please see
    # https://cloud.google.com/dlp/docs/reference/rest/v2/ContentItem#Table
    headers = [{"name": val} for val in table_header]
    rows = []
    for row in table_rows:
        rows.append({"values": [{"string_value": cell_val} for cell_val in row]})
    table = {"headers": headers, "rows": rows}

    # Construct the `item` for table to be inspected.
    item = {"table": table}

    # Prepare info_types by converting the list of strings into a list of
    # dictionaries.
    info_types = [{"name": info_type} for info_type in info_types]

    # Construct a rule set with caller provided hot-word, with a likelihood
    # boost to VERY_UNLIKELY when the hot-word are present
    hotword_rule = {
        "hotword_regex": {"pattern": custom_hotword},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_UNLIKELY
        },
        "proximity": {"window_before": 1},
    }

    rule_set = [
        {
            "info_types": info_types,
            "rules": [{"hotword_rule": hotword_rule}],
        }
    ]

    # Construct the configuration dictionary, which defines the entire inspect content task.
    inspect_config = {
        "info_types": info_types,
        "rule_set": rule_set,
        "min_likelihood": google.cloud.dlp_v2.Likelihood.POSSIBLE,
        "include_quote": True,
    }

    # Convert the project id into a full resource id.
    parent = f"projects/{project}/locations/global"

    # Call the API
    response = dlp.inspect_content(
        request={
            "parent": parent,
            "inspect_config": inspect_config,
            "item": item,
        }
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            try:
                if finding.quote:
                    print(f"Quote: {finding.quote}")
            except AttributeError:
                pass
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Entrée JSON :

{
  "item": {
    "table": {
      "headers": [
        {
          "name": "Fake Social Security Number"
        },
        {
          "name": "Real Social Security Number"
        }
      ],
      "rows": [
        {
          "values": [
            {
              "stringValue": "111-11-1111"
            },
            {
              "stringValue": "222-22-2222"
            }
          ]
        }
      ]
    }
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "includeQuote": true,
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "hotwordRule": {
              "hotwordRegex": {
                "pattern": "(Fake Social Security Number)"
              },
              "likelihoodAdjustment": {
                "fixedLikelihood": "VERY_UNLIKELY"
              },
              "proximity": {
                "windowBefore": 1
              }
            }
          }
        ]
      }
    ],
    "minLikelihood": "POSSIBLE"
  }
}

Sortie JSON :

{
  "result": {
    "findings": [
      {
        "quote": "222-22-2222",
        "infoType": {
          "name": "US_SOCIAL_SECURITY_NUMBER"
        },
        "likelihood": "VERY_LIKELY",
        "location": {
          "byteRange": {
            "end": "11"
          },
          "codepointRange": {
            "end": "11"
          },
          "contentLocations": [
            {
              "recordLocation": {
                "fieldId": {
                  "name": "Real Social Security Number"
                },
                "tableLocation": {}
              }
            }
          ]
        },
        "createTime": "TIMESTAMP",
        "findingId": "TIMESTAMP"
      }
    ]
  }
}

La valeur 111-11-1111, qui se trouve dans la colonne Fake Social Security Number, correspond à la règle relative aux mots clés. La protection des données sensibles lui a donc attribué le niveau de probabilité VERY_UNLIKELY. Ce niveau est inférieur à la probabilité minimale définie dans la configuration d'inspection (POSSIBLE) et le résultat est donc exclu des résultats d'inspection.

Vous pouvez tester cet exemple en supprimant l'ensemble de règles. Notez que la protection des données sensibles inclut 111-11-1111 dans les résultats.