CPU platforms

When you start a VM instance on Compute Engine, the instance uses one of the CPU platforms available on Compute Engine. A CPU platform is one of the available CPU processors described in the table below. Compute Engine offers both Intel and AMD processors for your VMs.

Unless otherwise specified, a VM instance uses the default processor of the zone where the instance will run. You can optionally specify another processor instead of the default processor, if it is available in the selected zone. For a list of zones and the available CPU processors, see Regions and zones.

On Compute Engine, each virtual CPU (vCPU) is implemented as a single hardware hyper-thread on one of the available CPU processors. On Intel Xeon processors, Intel Hyper-Threading Technology supports multiple app threads running on each physical processor core. You configure your Compute Engine virtual machine instances with one or more of these hyper-threads as vCPUs. The machine type specifies the number of vCPUs that your instance has.

Intel CPU processors

The following table describes Intel processors available for Compute Engine machine types:

CPU processor Supported machine types Base frequency (GHz) All-core turbo frequency (GHz) Single-core max turbo frequency (GHz)
Intel Xeon Scalable Processor (Cascade Lake)
2.8 3.4 3.9
3.1 3.8 3.9
2.5 3.4 4.0
2.2 2.9 3.7
Intel Xeon Scalable Processor (Skylake) 2.0 2.7 3.5
Intel Xeon E7 (Broadwell E7) 2.2 2.6 3.3
Intel Xeon E5 v4 (Broadwell E5) 2.2 2.8 3.7
Intel Xeon E5 v3 (Haswell) 2.3 2.8 3.8
Intel Xeon E5 v2 (Ivy Bridge) 2.5 3.1 3.5
Intel Xeon E5 (Sandy Bridge) 2.6 3.2 3.6

AMD CPU processors

The following table describes AMD processors available for Compute Engine machine types:

CPU platform Supported machine types Base frequency (GHz) Effective frequency (GHz) Max boost frequency (GHz)
AMD EPYC Rome 2.25 2.7 3.3

Frequency behavior

This page describes the hardware specifications of the CPUs available on Compute Engine but keep in mind that:

  • Most VMs get the all-core turbo frequency, even if only the base frequency is advertised to the guest environment.
  • A VM's guest environment will only see the base clock frequency, regardless of what frequency the VM is actually running at.
  • C-state is only supported for C2 machines types. For other machine types, C-State or P-State is not supported at this time so idling virtual CPUs within the guest environment might not work as expected.
  • Base clock frequency: A lower bound on CPU frequency, and the frequency at which the TSC (time stamp counter) increments.
  • All-core turbo frequency: The typical frequency at which each CPU runs, if all cores in the socket are non-idle at the same time.

What's next