Configure Private Service Connect in Cloud Composer

Cloud Composer 1 | Cloud Composer 2

This page explains how to create a Private IP environment that uses Private Service Connect instead of VPC peerings.

For general information about creating Private IP environments, see Configure a private IP environment.

About Private Service Connect in Cloud Composer

Components of your environment are distributed between the tenant and the customer project. In Private IP environments, the components located in these two projects connect using VPC peerings. VPC peerings have some limitations, including the limit on the maximum number of peerings in a VPC. These limits can become more evident if you use large-scale networks with Cloud Composer environments.

With Private Service Connect support in Cloud Composer, your private IP environments communicate internally without the use of VPC peerings. Such environments use the Private IP with PSC architecture.

Before you begin

• Private Service Connect support is available only in Cloud Composer 2.

• You can only enable Private Service Connect when you create a new environment. It is not possible to switch an existing environment to use Private Service Connect.

• Your environment must be a Private IP environment. Because VPC peerings are not used, you do not need to specify the CIDR ranges for the Cloud SQL instance and the internal Cloud Composer network.

• If the Disable Private Service Connect for Consumers organization policy constraint denies SERVICE_PRODUCER endpoints, it is not possible to create environments with Private Service Connect. This policy does not affect existing Cloud Composer environments with PSC. Such environments can operate when this policy is enabled.

Caution: If you create a new subnet for the Cloud Composer connection subnetwork, use the PRIVATE subnet purpose for it. Do not use the PRIVATE_SERVICE_CONNECT purpose. Subnets reserved for Private Service Connect Services cannot be used for the Cloud Composer connection subnetwork.

Enable Private Service Connect when you create an environment

Console

To create an environment with Private Service Connect, select the Private Service Connect connectivity type when you create a Private IP environment. Then specify the subnetwork for the Private Service Connect connection.

When you create a Private IP environment:

1. In the Network configuration section, expand the Show network configuration item.

2. In the Networking type section, select the Private IP environment option to create a Private IP environment.

3. In the Composer connectivity section, select Private Service Connect.

4. In the Composer connection subnetwork drop-down list, select the subnetwork for Private Service Connect endpoints.

   You can use your environment's subnetwork.

   As an alternative, you can specify a different subnetwork. Doing so gives you more control over the CIDR range from which the IP address for the PSC endpoint are selected.This range can be shared by multiple Cloud Composer environments. Each environment requires one IP address.

5. Specify other parameters for your Private IP environment.

gcloud

To create an environment with Private Service Connect, use the --connection-subnetwork argument when you create a Private IP environment. Then specify the subnetwork for the Private Service Connect connection.

gcloud composer environments create ENVIRONMENT_NAME \
    --location LOCATION \
    --image-version composer-2.6.6-airflow-2.6.3 \
    --enable-private-environment \
    --web-server-allow-all \
    --connection-subnetwork ENVIRONMENT_PSC_SUBNETWORK

Replace:

• ENVIRONMENT_NAME with the name of the environment.
• LOCATION with the region where the environment is located.

• ENVIRONMENT_PSC_SUBNETWORK with the URI of the subnetwork for Private Service Connect endpoints.

  You can use your environment's subnetwork.

  As an alternative, you can specify a different subnetwork. Doing so gives you more control over the CIDR range from which the IP address for the PSC endpoint are selected. This range can be shared by multiple Cloud Composer environments. Each environment requires one IP address.

Example:

gcloud composer environments create example-environment \
    --location us-central1 \
    --image-version composer-2.6.6-airflow-2.6.3 \
    --enable-private-environment \
    --web-server-allow-all \
    --connection-subnetwork "projects/example-project/regions/us-central1/subnetworks/default"

API

Construct an environments.create API request. In the Environment resource, specify the configuration parameters for the Private Service Connect connection.

// POST https://composer.googleapis.com/v1/{parent=projects/*/locations/*}/environments

{
  "name": "ENVIRONMENT_NAME",

  "config": {
    "softwareConfig": {
      "imageVersion": "composer-2.6.6-airflow-2.6.3"
    },
    "nodeConfig": {
      "network": "ENVIRONMENT_NETWORK",
      "subnetwork": "ENVIRONMENT_SUBNETWORK"
    },
    "privateEnvironmentConfig": {
      "enablePrivateEnvironment": true,
      "privateClusterConfig": {
        "enablePrivateEndpoint": false
      },
      "cloudComposerConnectionSubnetwork": "ENVIRONMENT_PSC_SUBNETWORK"
    }
    "webServerNetworkAccessControl": {
      "allowedIpRanges": [
        {
          "value": "0.0.0.0/0",
          "description": "Allows access from all IPv4 addresses"
        },
        {
          "value": "::0/0",
          "description": "Allows access from all IPv6 addresses"
        }
      ]
    }
  }
}

Replace:

• ENVIRONMENT_NAME with the name of the environment.
• ENVIRONMENT_NETWORK with the URI of your environment's network.
• ENVIRONMENT_SUBNETWORK with the URI of your environment's subnetwork.

• ENVIRONMENT_PSC_SUBNETWORK with the URI of the subnetwork for PSC endpoints.

  You can use your environment's subnetwork.

  As an alternative, you can specify a different subnetwork. Doing so gives you more control over the CIDR range from which the IP address for the PSC endpoint is selected. This range can be shared by multiple Cloud Composer environments. Each environment requires one IP address.

Example:

// POST https://composer.googleapis.com/v1/{parent=projects/*/locations/*}/environments

{
  "name": "example-environment",
  "config": {

    "softwareConfig": {
      "imageVersion": "composer-2.6.6-airflow-2.6.3"
    },
    "nodeConfig": {
      "network": "projects/example-project/global/networks/default",
      "subnetwork": "projects/example-project/regions/us-central1/subnetworks/default"
    },
    "privateEnvironmentConfig": {
      "enablePrivateEnvironment": true,
      "privateClusterConfig": {
        "enablePrivateEndpoint": false
      },
      "cloudComposerConnectionSubnetwork": "projects/example-project/regions/us-central1/subnetworks/default"
    }
    "webServerNetworkAccessControl": {
      "allowedIpRanges": [
        {
          "value": "0.0.0.0/0",
          "description": "Allows access from all IPv4 addresses"
        },
        {
          "value": "::0/0",
          "description": "Allows access from all IPv6 addresses"
        }
      ]
    }
  }
}

Terraform

When you create an environment, the cloud_composer_connection_subnetwork field in the private_environment_config block enables Private Service Connect.

resource "google_composer_environment" "example_environment" {
  provider = google-beta
  name = "ENVIRONMENT_NAME"
  region = "LOCATION"

  config {

    software_config {
      image_version = "composer-2.6.6-airflow-2.6.3"
    }

    node_config {
      network = "ENVIRONMENT_NETWORK"
      subnetwork = "ENVIRONMENT_SUBNETWORK"

    }

    private_environment_config {
      // Other private IP environment parameters
      cloud_composer_connection_subnetwork = "ENVIRONMENT_PSC_SUBNETWORK"
    }

    web_server_network_access_control  {
      allowed_ip_range {
        value = "0.0.0.0/0"
        description = "Allows access from all IPv4 addresses"
      }

      allowed_ip_range {
        value = "::0/0"
        description = "Allows access from all IPv6 addresses"
      }
    }
  }
}

Replace:

• ENVIRONMENT_NAME with the name of the environment.
• ENVIRONMENT_NETWORK with the URI of your environment's network.
• ENVIRONMENT_SUBNETWORK with the URI of your environment's subnetwork.

• ENVIRONMENT_PSC_SUBNETWORK with the URI of the subnetwork for PSC endpoints.

  You can use your environment's subnetwork.

  As an alternative, you can specify a different subnetwork. Doing so gives you more control over the CIDR range from which the IP address for the PSC endpoint is selected. This range can be shared by multiple Cloud Composer environments. Each environment requires one IP address.

Example:

resource "google_composer_environment" "example" {
  provider = google-beta
  name = "example-environment"
  region = "us-central1"

  config {
    environment_size = "ENVIRONMENT_SIZE_SMALL"

    software_config {
      image_version = "composer-2.6.6-airflow-2.6.3"
    }

    node_config {
      network = "projects/example-project/global/networks/default"
      subnetwork = "projects/example-project/regions/us-central1/subnetworks/default"
    }

    private_environment_config {
      // Other private IP environment parameters
      enable_private_endpoint = "true"
      cloud_composer_connection_subnetwork = "projects/example-project/regions/us-central1/subnetworks/default"
    }

    web_server_network_access_control  {
      allowed_ip_range {
        value = "0.0.0.0/0"
        description = "Allows access from all IPv4 addresses"
      }

      allowed_ip_range {
        value = "::0/0"
        description = "Allows access from all IPv6 addresses"
      }
    }
 }
}

What's next

• Configuring Private IP environments
• Creating environments
• Environment architecture
• About Private IP environments