Access resources in a private JFrog Artifactory with private pools

---

This page demonstrates how to use Cloud Build private pools to access resources from a private Virtual Private Cloud network.

In this tutorial, you will create a JFrog Artifactory in Compute Engine hosted in a private VPC network, and then configure a build running in a private pool to access data from that Artifactory. The Jfrog Artifactory is an open-source binary repository manager.

Objectives

• Set up a Jfrog Artifactory on Compute Engine
• Upload a file to the Artifactory
• Create a private pool
• Peer the service producer network that hosts the private pool to the Artifactory's Virtual Private Cloud network
• Write a build configuration file to access the data in Artifactory

Costs

In this document, you use the following billable components of Google Cloud:

• Compute Engine
• Cloud Build

To generate a cost estimate based on your projected usage, use the pricing calculator. New Google Cloud users might be eligible for a free trial.

Before you begin

1. Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.

2. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

   Note: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.

   Go to project selector

3. Make sure that billing is enabled for your Google Cloud project.

4. Enable the Compute Engine, Cloud Build, Service Networking APIs.

   Enable the APIs

5. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

   Note: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.

   Go to project selector

6. Make sure that billing is enabled for your Google Cloud project.

7. Enable the Compute Engine, Cloud Build, Service Networking APIs.

   Enable the APIs

Option A: Use Cloud Shell

You can follow this tutorial using Cloud Shell, which comes preinstalled with the Google Cloud CLI used in this tutorial. If you use Cloud Shell, you don't need to install these command-line tools on your workstation.

To use Cloud Shell:

1. Go to the Google Cloud console.

   Google Cloud console

2. Click the Activate Cloud Shell button at the top of the Google Cloud console window.

   A Cloud Shell session opens inside a new frame at the bottom of the Google Cloud console and displays a command-line prompt.

   

Option B: Use command-line tools locally

If you prefer to follow this tutorial on your workstation, follow these steps to install the necessary tools.

Note: If you are using an existing environment where gcloud has already been installed, make sure gcloud is initialized with your user account.

1. Install the Google Cloud CLI.

   Note: If you've installed gcloud CLI previously, make sure you have the latest available version by running gcloud components update.

Create the private Artifactory

1. Create a Compute Engine instance from a container:

   gcloud compute instances create-with-container jfrog \
   --container-image docker.bintray.io/jfrog/artifactory-jcr:latest \
   --zone us-central1-a
   

2. SSH into the instance. The container may take a couple of minutes to initialize.

   gcloud compute ssh --zone us-central1-a jfrog
   

3. Test the connection by running the following command. Once the container is ready, it will respond with a 200 HTTP code, followed by an HTML page.

   curl -i http://localhost:8081
   

4. To create a repository in the Artifactory, you must sign the JFrog EULA (End User License Agreement):

   curl -XPOST -vu admin:password http://localhost:8081/artifactory/ui/jcr/eula/accept
   

   You will see an output similar to the following:

       *   Trying 127.0.0.1:8081...
       * Connected to localhost (127.0.0.1) port 8081 (#0)
       * Server auth using Basic with user 'admin'
       > POST /artifactory/ui/jcr/eula/accept HTTP/1.1
       > Host: localhost:8081
       > Authorization: Basic ….
       > User-Agent: curl/7.74.0
       > Accept: */*
       >
       * Mark bundle as not supporting multiuse
       < HTTP/1.1 200 OK
       < X-JFrog-Version: Artifactory/7.19.9 71909900
       < X-Artifactory-Id: ….
       < X-Artifactory-Node-Id: jfrog2
       < SessionValid: false
       < Content-Length: 0
       < Date: Fri, 25 Jun 2021 19:08:10 GMT
   
       * Connection #0 to host localhost left intact
   

Upload a file to the Artifactory

1. Create a txt file to upload to the Artifactory:

   echo "Hello world" >> helloworld.txt
   

2. JFrog comes with a default example repository. Upload to the repository using the default credentials:

   curl -u admin:password -X PUT \
   "http://localhost:8081/artifactory/example-repo-local/helloworld.txt" \
   -T helloworld.txt
   

   This should return:

       {
       "repo" : "example-repo-local",
       "path" : "/helloworld.txt",
       "created" : "2021-06-25T19:08:24.176Z",
       "createdBy" : "admin",
       "downloadUri" : "http://localhost:8081/artifactory/example-repo-local/helloworld.txt",
       "mimeType" : "text/plain",
       "size" : "12",
       "checksums" : {
         "sha1" : "...",
         "md5" : "...",
         "sha256" : "..."
       },
       "originalChecksums" : {
         "sha256" : "..."
       },
       "uri" : "http://localhost:8081/artifactory/example-repo-local/helloworld.txt"
       }
   

3. End the SSH session by typing exit.

4. Remove the external IP address, so the Artifactory will only be accessible from private internal sources.

   gcloud compute instances delete-access-config --zone us-central1-a jfrog
   

Try accessing the data from the Artifactory

1. Set environment variables to store your project ID and project number:

   PROJECT_ID=$(gcloud config list --format='value(core.project)')
   PROJECT_NUMBER=$(gcloud projects describe $PROJECT_ID --format='value(projectNumber)')
   

2. Grant the Compute Engine Viewer role to the Cloud Build service account to be able to view the internal IP address for your JFrog instance:

   gcloud projects add-iam-policy-binding $PROJECT_ID \
       --member=serviceAccount:$[e-mail] \
       --role=roles/compute.viewer
   

3. Create a file named cloudbuild.yaml containing the following code to read from the Artifactory. This is the build configuration file.

   The first step fetches the internal IP address from the Artifactory you created. The second step sends a request to that address to read the .txt file you created. The steps are separated to make it easier to isolate permissions and networking errors. If the first step fails, this is due to a permissions error and you will need to ensure that the Cloud Build service account has access to the compute engine resources, as shown above. If the second step fails, this is due to a networking error. The rest of this tutorial addresses the network configurations.

   steps:
     - id: Get Private Artifactory Address
       name: gcr.io/cloud-builders/gcloud
       entrypoint: /bin/bash
       args: 
         - -c
         - |
           gcloud compute instances describe jfrog \
           --zone us-central1-a \
           --format="value(networkInterfaces.networkIP)" >> _INTERNAL_IP_ADDRESS
   
     - id: Pull from Private Artifactory
       name: gcr.io/cloud-builders/curl
       entrypoint: /bin/bash
       args:
         - -c
         - |
           curl -u admin:password --connect-timeout 10.00 \
           http://$(cat _INTERNAL_IP_ADDRESS):8081/artifactory/example-repo-local/helloworld.txt

4. Start a build using the build config file.

   By default, when you run a build on Cloud Build, the build runs in a secure, hosted environment with access to the public internet. Each build runs on its own worker and is isolated from other workloads. The default pool has limits on how much you can customize the environment, particularly around private network access. In this example, you are trying to access a private network from a public worker.

   Run the cloudbuild.yaml with the following command. It should fail.

   gcloud builds submit --no-source
   

   The output will look something like:

   BUILD
   Starting Step #0 - "Get Private Artifactory Address"
   Step #0 - "Get Private Artifactory Address": Already have image (with digest): gcr.io/cloud-builders/gcloud
   Finished Step #0 - "Get Private Artifactory Address"
   Starting Step #1 - "Pull from Private Artifactory"
   Step #1 - "Pull from Private Artifactory": Already have image (with digest): gcr.io/cloud-builders/curl
   Step #1 - "Pull from Private Artifactory":   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
   Step #1 - "Pull from Private Artifactory":                                  Dload  Upload   Total   Spent    Left  Speed
     0     0    0     0    0     0      0      0 --:--:--  0:02:09 --:--:--     0curl: (7) Failed to connect to 10.128.0.2 port 8081: Connection timed out
   Finished Step #1 - "Pull from Private Artifactory"
   ERROR
   ERROR: build step 1 "gcr.io/cloud-builders/curl" failed: step exited with non-zero status: 7
   

   You can see by the connection timeout that Cloud Build is not able to reach the internal IP address. In order to access this private resource, you must use Cloud Build Private Pools.

Create a private connection between the Artifactory's VPC network and the service producer network

1. First, ensure your VPC network allows ingress. Create a firewall rule to allow inbound internal traffic to the network with the jfrog instance. The range 10.0.0.0/16 is in a private address space, which you will use for the Cloud Build private pools in the steps below.

   gcloud compute firewall-rules create allow-private-pools --direction=INGRESS \
   --priority=1000 --network=default --action=ALLOW --rules=all --source-ranges=10.0.0.0/16
   

2. Create a reserved range for the Cloud Build private pool to utilize for the workers. The reserved range must be in the network where your Artifactory is located. In this case, it is the default compute network.

   You have two options when you set your reserved ranges. You can either specify the range explicitly by providing --addresses and --prefix-length, or you can allow Google Cloud to provision an available range based on a provided prefix-length.

   In the example below, you explicitly set the addresses to match the firewall rule you created. The private pool will use this address space and the inbound traffic will not be blocked.

   gcloud compute addresses create jfrog-ranges --global --purpose=VPC_PEERING \
   --addresses=10.0.0.0 --prefix-length=16 --network=default
   

3. Peer the VPC network with the Service Networking API.

   Cloud Build private pools run workers using the Service Networking API. This enables you to offer your managed services on internal IP addresses. This is achieved by peering the Google-managed VPC running the Cloud Build private pool workers with your own VPC. This may take a few minutes to complete.

   gcloud services vpc-peerings connect --service=servicenetworking.googleapis.com \
   --ranges=jfrog-ranges --network=default
   

Create the private pool

1. The default VPC network is now ready for use with Cloud Build private pools. Create the private pool and peer it with the VPC network.

    gcloud builds worker-pools create jfrog-pool --region us-central1 \
    --peered-network=projects/${PROJECT_ID}/global/networks/default
   

2. To run your build with the new private pool, you can either pass in the --worker-pool flag with the gcloud command or update your cloudbuild.yaml config to ensure it always uses the private pool. For this tutorial, update the cloudbuild.yaml by adding the following option:

   options:
     pool:
       name: 'projects/${PROJECT_ID}/locations/us-central1/workerPools/jfrog-pool'

3. The complete file will look like the following:

   steps:
     - id: Get Private Artifactory Address
       name: gcr.io/cloud-builders/gcloud
       entrypoint: /bin/bash
       args: 
         - -c
         - |
           gcloud compute instances describe jfrog \
           --zone us-central1-a \
           --format="value(networkInterfaces.networkIP)" >> _INTERNAL_IP_ADDRESS
   
     - id: Pull from Private Artifactory
       name: gcr.io/cloud-builders/curl
       entrypoint: /bin/bash
       args:
         - -c
         - |
           curl -u admin:password --connect-timeout 10.00 \
           http://$(cat _INTERNAL_IP_ADDRESS):8081/artifactory/example-repo-local/helloworld.txt
   
   options:
     pool:
       name: 'projects/${PROJECT_ID}/locations/us-central1/workerPools/jfrog-pool'

4. Start the build:

    gcloud builds submit --no-source
   

5. The build will use the new private pool, peered with the VPC network, allowing it to access the internal IP address of the Artifactory. The output will be successful and Step #1 should print "Hello world".

Clean up

To avoid incurring charges to your Google Cloud account for the resources used in this tutorial, either delete the project that contains the resources, or keep the project and delete the individual resources.

If you created a new project for this tutorial, delete the project. If you used an existing project and wish to keep it without the changes added in this tutorial, delete resources created for the tutorial.

Deleting the project

The easiest way to eliminate billing is to delete the project that you created for the tutorial.

To delete the project:

Caution: Deleting a project has the following effects:

• Everything in the project is deleted. If you used an existing project for the tasks in this document, when you delete it, you also delete any other work you've done in the project.
• Custom project IDs are lost. When you created this project, you might have created a custom project ID that you want to use in the future. To preserve the URLs that use the project ID, such as an appspot.com URL, delete selected resources inside the project instead of deleting the whole project.

If you plan to explore multiple architectures, tutorials, or quickstarts, reusing projects can help you avoid exceeding project quota limits.

1. In the Google Cloud console, go to the Manage resources page.

   Go to Manage resources

2. In the project list, select the project that you want to delete, and then click Delete.
3. In the dialog, type the project ID, and then click Shut down to delete the project.

Deleting tutorial resources

1. Delete the Compute Engine service you deployed in this tutorial:

    gcloud compute instances delete jfrog
   

2. Delete the firewall rule:

    gcloud compute firewall-rules delete allow-private-pools --network=default
   

3. Remove the reserved range:

    gcloud compute addresses delete jfrog-ranges --global
   

4. Delete the Cloud Build private pool:

    gcloud builds worker-pools delete jfrog-pool
   

What's next

• Learn how to configure commonly-used private network setups with private pools
• Learn how to use VPC service controls with private pools