This document describes how to onboard your containerized workloads more securely, reliably, and cost-effectively to Google Kubernetes Engine (GKE). It provides guidance for configuring administrative and network access to clusters. This article assumes a working understanding of Kubernetes resources and cluster administration as well as familiarity with Google Cloud networking features.
The following diagram shows an example of a flexible and highly available structure for deploying a GKE cluster.
Google Cloud creates all of its resources within a project entity.
You can use projects to represent your various operating environments. For
example, you can have
staging projects for operations teams
as well as a
development project for developers. You can apply more granular and
strict policies to the projects that hold your most mission-critical and
sensitive data and workloads. You can then apply more permissive and flexible policies for
developers in the
development environment to experiment.
A project can contain multiple clusters. If you have multiple workloads to deploy, you can choose to use a single, shared cluster or separate clusters for these workloads.
Networks and subnets
Within each project, you can have one or more VPC networks, which are virtual versions of physical networks. Each VPC network is a global resource that contains other networking-related resources, such as subnets, external IP addresses, firewall rules, routes, your VPN, and Cloud Router. Within a VPC network, you can use subnets, which are regional resources, to isolate and control traffic into or out of each region between your GKE clusters.
Each project comes with a single default network. You can create and configure an additional network to map to your existing IP address management (IPAM) convention. You can then apply firewall rules to this network to filter traffic to and from your GKE nodes. By default, all external traffic to your GKE nodes is denied.
To control communication between subnets, you must
create firewall rules
that allow traffic to pass between the subnets. Use the
during cluster or node pool creation to appropriately tag your
GKE nodes for the firewall rules to take effect.
You can also use tags to create routes between your subnets if needed.
Zonal and regional clusters
You can create Standard and Autopilot clusters. Autopilot clusters are regional clusters. Standard clusters are regional clusters or zonal. Zonal clusters can be single zone or multi-zonal. Multi-zonal and regional clusters distribute resources across multiple zones within a region, which can improve the availability and resilience of your clusters.
Zonal clusters have the following properties:
- Create a single replica of the control plane that runs in a single zone.
- If they are multi-zonal, run nodes in multiple zones.
Regional clusters have the following properties:
- Replicate control planes across three zones.
- Can run nodes in multiple zones or a single zone depending on the configured node locations.
You can choose to create zonal or regional clusters at the time of cluster creation. You can add new zones to an existing cluster to make it a multi-zonal cluster. However, you cannot change an existing zonal cluster to be regional and you cannot change a regional cluster to be zonal.
The service availability of nodes in your GKE-managed clusters is covered by the Compute Engine service-level agreement (SLA).
To learn more about zonal and regional clusters, see the GKE documentation.
Managing identity and access
Identity and Access Management (IAM) roles and groups
The following illustration of an IAM policy layout shows the
principle of least privilege for a
dev project that's set up for developers
to develop and test their upcoming features and bug fixes, as well as a
prod project for production traffic:
As the following table shows, there are four groups of users within the organization with varying levels of permissions, granted through IAM roles across the two projects:
||Can create Kubernetes resources for the existing clusters within the project, and is not allowed to create or delete clusters.|
||Full administrative access to the clusters and Kubernetes resources running within the project.|
||Create, modify, and delete firewall rules and SSL certificates as well as view resources that were created within each cluster including the logs of the running pods.|
||Create, modify, and delete networking resources, except for firewall rules and SSL certificates.|
In addition to the three teams with access to the
prod project, an additional
is given the
container.developer role for
prod, allowing it to create, list,
and delete resources within the cluster. Service accounts can be used to give
automation scripts or deployment frameworks the ability to act on your behalf.
Deployments to your production project and clusters should go through an
dev project there are multiple developers working on the same
application within the same cluster. This is facilitated by
which the cluster user can create. Each developer
can create resources within their own namespace, therefore avoiding naming
conflicts. They can also reuse the same YAML configuration files for their
deployments so that their configurations stay as similar as possible during
Namespaces can also be used to create quotas on CPU, memory, and storage usage within the cluster, ensuring that one developer isn't using too many resources within the cluster. For more information about using namespaces, see Kubernetes best practices: Specifying Namespaces in YAML.
The next section discusses restricting users to operating within certain namespaces.
Role-based access control
GKE clusters running Kubernetes 1.6 and later can take advantage of further restrictions to what users are authorized to do in individual clusters. IAM can provide users access to clusters and the resources within them, but Kubernetes role-based access control (RBAC) allows you to use the Kubernetes API to further constrain the actions users can perform inside their clusters.
With RBAC, cluster administrators apply fine-grained policies to individual
namespaces within their clusters or to the cluster as a whole. The Kubernetes
kubectl tool uses the active credentials from the gcloud CLI,
allowing cluster admins to map roles to Google Cloud identities
(users, service accounts, and Google Groups) as subjects in RoleBindings.
Google Groups for RBAC enables you to use Groups with Kubernetes RBAC. To use this feature, you must configure Google Groups in Google Workspace, create a cluster with the feature enabled, and use RoleBindings to associate your Groups with the roles that you want to bind them to. For more information, see Role-based access control.
For example, in the following figure,
there are two users,
user-b, who have been granted the
pod-reader roles on the
As another example, there are Google Cloud project-level IAM roles that give certain users access to all clusters in a project. In addition, individual namespace- and cluster-level role bindings are added through RBAC to give fine-grained access to resources within particular clusters or namespaces.
Kubernetes includes some default roles, but as a cluster
administrator, you can create your own that map more closely to your
organizational needs. The following example role allows users only to view,
edit, and update ConfigMaps but not delete them, because the
delete verb is
kind: Role apiVersion: rbac.authorization.k8s.io/v1 metadata: namespace: default name: config-editor rules: - apiGroups: [""] resources: ["configmaps"] verbs: ["get", "list", "watch", "create", "update", "patch"]
After you have defined roles, you can apply those roles to the cluster or
namespace through bindings. Bindings associate roles to their users, groups,
or service accounts. The following example shows how to bind a previously
created role (config-editor) to the firstname.lastname@example.org user and
kind: RoleBinding apiVersion: rbac.authorization.k8s.io/v1 metadata: name: config-editors namespace: development subjects: - kind: User name: email@example.com apiGroup: rbac.authorization.k8s.io roleRef: kind: ClusterRole name: config-editor apiGroup: rbac.authorization.k8s.io
For more information about RBAC, see the GKE documentation.
Image access and sharing
This section discusses the following ways to share images:
- Make the images public.
- Share images between projects.
Using Artifact Registry is important if you enable private clusters. In private clusters, the container runtime for your cluster can't pull container images from an external container registry directly, unless you set up a Cloud NAT. The container runtime can pull images from Artifact Registry in a private cluster, without a Cloud NAT or Private Google Access. You must place the nodes in a subnet that has Private Google Access enabled if the nodes need to communicate with Artifact Registry directly (for example, the nodes need to create new artifacts and store them in Artifact Registry). For more information, see Pulling container images from an image registry.
Making images public in Artifact Registry
You can make images public by making their objects and buckets public in Artifact Registry. For more detailed instructions, see the Artifact Registry Access control documentation.
If you must use public images, consider validating the set of public images that are allowed to be deployed into your clusters. (For more information, see the Binary Authorization section.)
Accessing images across projects in Artifact Registry
You can share container images between projects by ensuring that your Kubernetes
nodes use a service account. You can grant the service account
access as a
storage.viewer on projects where you want to use
Artifact Registry. Use a custom service account that has restricted permissions,
because the default service account has editor access to the entire project.
To use a different service account for your clusters, provide the service
account when you create the cluster or node-pool by using the
For more information, see Configuring access control.
Determining the correct image pull policy
imagePullPolicy property in Kubernetes
determines whether the kubelet attempts to pull an image while it's starting up a
Pod. Configure an appropriate
imagePullPolicy setting to specify for
your container images. For example, you might specify the following image pull
In this case, the kubelet retrieves a copy of the image only if the image isn't available in the node's cache.
For more information about the possible image pull policies that you can specify, see Container Images in the Kubernetes documentation.
Using dynamic admission controllers to enforce policies
Dynamic admission controllers are a part of the Kubernetes control plane. They can intercept incoming requests made to the API server. Admission controllers are a powerful tool that can help you enforce enterprise-specific custom policies in your GKE clusters.
Kubernetes supports two types of admission controllers: mutating admission controllers and validating admission controllers.
Mutating admission controllers intercept admission requests and can mutate (alter) the request. The request is then passed on to the API server.
Validating admission controllers examine a request and determine if it's valid according to rules that you specify. If any validating admission controllers are configured in the cluster, they're invoked after the request has been validated by the API server. Validating admission controllers can reject requests in order to ensure conformance to policies that are defined in the controller.
For example, you can enforce an image pull policy by using a mutating admission
controller to make sure that the policy is set to
Always regardless of the
imagePullPolicy setting that was specified by developers who submitted
Using prepackaged apps from Google Cloud Marketplace
You can also consider deploying prepackaged Kubernetes apps from Google Cloud Marketplace. The Kubernetes apps listed on Google Cloud Marketplace are tested and vetted by Google, including vulnerability scanning and partner agreements for maintenance and support.
Using Workload Identity to interact with Google Cloud service APIs
Often, enterprise architectures involve architectural components that span cloud services, such as cloud-managed services and hosted services. It's a common pattern for your GKE applications or services to have to communicate with Google Cloud managed services such as Cloud Storage and BigQuery. As an example, you might need to store customer records after they're processed by batch jobs in GKE into BigQuery for later analysis.
Workload Identity allows a Kubernetes service account in your GKE cluster to act as an IAM service account. Pods that use the configured Kubernetes service account automatically authenticate as the IAM service account when accessing Google Cloud APIs. Note that this assumes that you have granted the required level of access for the service to the Google Cloud service account.
Managing cluster security
Security is a multifaceted discipline that's of paramount importance in enterprise deployments of GKE clusters. This section covers several factors that you can use to harden your cluster's security.
Vulnerability scanning for images
Artifact Registry can scan images for known security vulnerabilities. Supported images include Ubuntu, Debian, RedHat, and others (see Vulnerability sources for the complete list). We recommend that you scan images that you plan to use in your GKE clusters.
If possible, enable Container Analysis to further reduce your security risks.
To view vulnerabilities for an image, see Scanning images automatically.
Your organization can benefit from automating the tracking and receipt of notifications when changes are made to your Artifact Registry repository. For example, you can be notified when a new image is created or one is deleted. You can build a pipeline where application listeners are subscribed to a Pub/Sub topic to which Artifact Registry events are published. You can then use these events to trigger builds or automated deployments. For more information, see the Artifact Registry documentation.
With Kubernetes, you must determine if and when an image should be considered valid for deployment into your cluster. For this task you can use Binary Authorization. This is a deploy-time construct that lets you define a workflow that enforces the signatures (attestations) that an image must have in order to be deployable to your cluster.
The workflow is defined in terms of policies. As you move your code and therefore your container image through a CI/CD pipeline, Binary Authorization records attestations for each of these stages as defined in your Binary Authorization policy. These attestations validate that an image has successfully passed the defined milestones.
Binary Authorization integrates with the GKE deployment API and can ensure that deployment of an image is subject to the image having all the required attestations. Failed deployment attempts are autologged, and cluster administrators can review and audit them.
For a tutorial about how to implement Binary Authorization for GKE using Cloud Build, see Implementing Binary Authorization using Cloud Build and GKE.
Secure access with gVisor in GKE Sandbox
A container provides a layer of security and kernel isolation, but it might still be susceptible to breaches that lead to attackers gaining access to the host's operating system (OS). A more resilient approach to security isolation between a container and its host OS is to create another layer of separation. One approach is to use GKE Sandbox.
GKE Sandbox uses gVisor, an open source container runtime that was released by Google. Internally, gVisor creates a virtual kernel for containers to interact with, which abstracts the reach that a container has to the host kernel. Additionally, it enforces control on the file and network operations that the container can perform.
Because GKE Sandbox creates an additional layer of isolation, it might incur additional memory and CPU overhead. Before you use GKE Sandbox, consider which workloads need this elevated level of security. Typically, good candidates are services that are based on external images.
For information on how to create a node pool with GKE enabled, see Harden workload isolation with GKE Sandbox.
Kubernetes audit logging records all API requests that are made to the Kubernetes API server. This logging is useful for helping you detect anomalies and unusual patterns of access and configuration setup. Examples of what you might want to check and alert on include the following:
- Deleting a deployment.
- Attaching to or using
execto access a container that has privileged access.
- Modifying ClusterRole objects or creating role bindings for the cluster roles.
- Creating service accounts in the
GKE integrates Kubernetes audit logging with Cloud Audit Logs and Cloud Logging. You can access these logs the same way you access logs for resources that run in your Cloud project. API requests made to the Kubernetes API server can be logged, and you can use them to review API activity patterns.
Each request (event) that's captured by the Kubernetes API server is processed using one or more policies that you define. These can be either Kubernetes audit policies that determine which events are logged, or they can be Google Kubernetes Engine audit policies that determine whether the events are logged in the admin activity log or the data log. Admin activity logs are enabled by default. You can also enable data access logging if you need to log details about what metadata and data was read or written within the clusters. Note that enabling data access logging can incur additional charges. For more information, see the pricing documentation.
Pod security policies
A common attack vector is to deploy pods that have escalated privileges in an attempt to gain access to a Kubernetes cluster. Gatekeeper is an admission controller that uses policies that outline what a Pod is allowed to do. You can use it to restrict access to how namespaces are used, to how volume types are used, and to underlying OS capabilities.
Container security considerations
The fundamental building block for Kubernetes services is the container. This makes container security a key factor when you plan cluster security and policies. Carefully consider the following:
- The images that you build your containers from.
- The privileges that you assign to containers.
- How containers interact with the host OS and other services.
- How containers access and log sensitive information.
- How you manage the lifecycle of the containers in your clusters.
Kubernetes provides a service abstraction that includes load-balancing and service discovery across sets of pods within a cluster as well as to legacy systems that are running outside the cluster. The following sections describe best practices for communication between Kubernetes pods and with other systems, including other Kubernetes clusters.
VPC-native clusters compared to routes-based clusters
Based on how GKE clusters route traffic from one Pod to another, the clusters can be categorized into two types.
- A cluster that uses alias IP ranges for routing traffic; this is called a VPC-native cluster.
- A cluster that uses Google Cloud routes; this is called a routes-based cluster.
VPC-native clusters use alias IP ranges for Pod networking. This means that the control plane automatically manages the routing configuration for pods instead of configuring and maintaining static routes for each node in the GKE cluster. Using alias IP ranges, you can configure multiple internal IP addresses that represent containers or applications hosted in a VM, without having to define a separate network interface. Google Cloud automatically installs VPC network routes for primary and alias IP ranges for the subnet of the primary network interface. This greatly simplifies Pod-to-Pod traffic routing.
Additionally, VPC-native clusters are not subject to route quotas. Leveraging alias IP ranges in the cluster fabric provides direct access to Google services like Cloud Storage and BigQuery; this access otherwise would be possible only with a NAT gateway.
It's a common pattern for enterprises to have their GKE clusters communicate securely with their on-premises ecosystem of applications and services. Alias IP ranges permit this, because the alias IP addresses are discoverable over Cloud VPN or Cloud Interconnect. This helps give you secure connectivity across your on-premises and Google Cloud infrastructure.
You need to decide which cluster type is best suited to your network topology. Key factors are the availability of IP addresses in your network, cluster (nodes) expansion plans in your enterprise, and connectivity to other applications in the ecosystem. VPC-native clusters tend to consume more IP addresses in the network, so you should take that into account. Note that you cannot migrate a VPC-native cluster to a route-based cluster after creation and a route-based cluster to a VPC-native cluster, so it's important to understand the implications of your choice before you implement it.
Authorized networks for control plane access
The authorized networks option restricts access to the control plane endpoint (the API server) from the CIDR ranges that you specify and ensures that only teams within your network can administer your cluster.
These feature has the following requirements:
- Only 50 CIDR ranges are allowed.
- If you're using a CI/CD pipeline, to let your CI/CD tools have access to the cluster's API server, you must add their IP addresses or CIDR range to the allowlist (see VPC firewall rules overview).
By default, all nodes in a GKE cluster have public IP addresses. A good practice is to create private clusters, which gives all worker nodes only private RFC 1918 IP addresses. Private clusters enforce network isolation, reducing the risk exposure surface for your clusters. Using private clusters means that, by default, only clients inside your network can access services in the cluster. To allow external services to reach services in your cluster, you can use an HTTP(S) load balancer or a network load balancer.
When you want to open up access to the control plane outside your VPC network, you can use private clusters with authorized networks. When you enable authorized networks, your cluster control plane endpoint gets two IP addresses, an internal (private) one and a public one. The internal IP address can be used by anything internal to your network that's within the same region. The public IP address of the control plane can be used by any user or process that's external to your network and that's from an allowed CIDR range or IP address. You can also use this feature in conjunction with Cloud Interconnect or Cloud VPN to enable access to the control plane node only from within your private data center.
Data exfiltration protection
Additionally, you can use VPC Service Controls to help mitigate the risk of data exfiltration. VPC Service Controls help you protect managed Google Cloud services in one or more projects by letting you define a service perimeter for access to these services. You can give applications that run in your GKE clusters access to reach these managed services by setting up appropriate access levels. You can also use VPC Service Controls to protect the GKE cluster-creation control plane.
Communicating within the same cluster
Kubernetes allows you to define services that group pods that are running in the cluster based on a set of labels. This group of pods can be discovered within your cluster using DNS. For more information about service discovery in Kubernetes, go to the Connecting Applications with Services documentation.
A cluster-local DNS server,
kube-dns, is deployed in each GKE
cluster that handles mapping service names to healthy Pod IPs.
By default, the Kubernetes DNS server returns the service's cluster IP address.
This IP address is static throughout the lifetime of the service. When sending
traffic to this IP, the iptables on the node load balance packets across
the ready pods that match the selectors of the service. These iptables are
programmed automatically by the
kube-proxy service running on each node.
Packet flow: ClusterIP
The following diagram shows the DNS response and packet flow of a standard
Kubernetes service. While Pod IP addresses are routable from outside the
cluster, a service's cluster IP address is only accessible within the cluster.
These virtual IP addresses are implemented by doing destination network
address translation (DNAT) in each Kubernetes node. The
running on each node keeps forwarding rules up to date on each node that map
the cluster IP address to the IP addresses of healthy pods
across the cluster. If there is a Pod of the service running on the local node,
then that Pod is used, otherwise a random Pod in the cluster is chosen.
For more information about how ClusterIP is implemented, go to the Kubernetes documentation.
If you want service discovery and health monitoring but would rather have the DNS service return you the IP addresses of pods rather than a virtual IP address, you can provision the service with the ClusterIP field set to
None, which makes the service headless.
In this case, the DNS server returns a list of A records that map the DNS name of your service to the A records of the ready pods that match the label selectors defined by the service. The records in the response rotate to facilitate spreading load across the various pods. Some client-side DNS resolvers might cache DNS replies, rendering the A record rotation ineffective. The advantages of using the ClusterIP are listed in the Kubernetes documentation. For more information about using ClusterIP in GKE, see Exposing applications using services.
One typical use case for headless services is with StatefulSets. StatefulSets are well-suited to run stateful applications that require stable storage and networking among their replicas. This type of deployment provisions pods that have a stable network identity, meaning their hostnames can be resolved in the cluster. Although the Pod IP address might change, its hostname DNS entry is kept up to date and resolvable.
The following is an example of the DNS response and traffic pattern for a headless service. Pod IP addresses are routable through the default Google Cloud subnet route tables and are accessed by your application directly.
You can use GKE network policy enforcement to control the communication between your cluster's pods and services. To define a network policy on GKE, you can use the Kubernetes Network Policy API to create pod-level firewall rules. These firewall rules determine which pods and services can access one another inside your cluster.
Network policies enhance the security of the workloads running on your cluster. For example, you can create a network policy to ensure that a compromised front- end service in your application cannot communicate directly with a billing or accounting service several levels down.
You can also use network policies to isolate workloads belonging to different tenants. For example, you can provide secure multi-tenancy by defining a model where there is one tenant for each namespace. In such a model, network policy rules can ensure that pods and services in a given namespace cannot access other Pods or services in a different namespace.
Connecting to a GKE cluster from inside Google Cloud
To connect to your services from outside of your cluster but within the Google Cloud
network's private IP address space, use
internal load balancing.
When creating a service with
type: Load Balancer and a
cloud.google.com/load-balancer-type: Internal annotation in Kubernetes,
an internal Network Load Balancer
is created in your Google project and configured to distribute TCP and UDP traffic
Connecting from inside a cluster to external services
In many cases it is necessary to connect your applications running inside of Kubernetes with a service, database, or application that lives outside of the cluster. You have three options, as outlined in the following sections.
|Stub domains||In Kubernetes 1.6 and later, you can configure the cluster internal DNS service (`kube-dns`) to forward DNS queries for a certain domain to an external DNS server. This is useful when you have authoritative DNS servers that should be queried for a domain that your Kubernetes pods must use.|
|External name services||External name services allow you to map a DNS record to a service name within the cluster. In this case, DNS lookups for the in-cluster service return a CNAME record of your choosing. Use this if you only have a few records that you want to map back to existing DNS services.|
|Services without selectors||You can create services without a selector and then manually add endpoints to it to populate service discovery with the correct values. This allows you to use the same service discovery mechanism for your in- cluster services while ensuring that systems without service discovery through DNS are still reachable. While this approach is the most flexible, it also requires the most configuration and maintenance in the long term.|
For more information about DNS, go to the Kubernetes DNS Pods and Services documentation page.
Configuring your services in Kubernetes to receive internet traffic
Kubernetes services can be exposed using NodePort, ClusterIP, and LoadBalancer.
However, when you have many external-facing services, you can consider using Kubernetes Ingress resources. Ingress provides an entry point for your cluster and lets you define routing rules that route incoming requests to one or more backend services in your cluster. In GKE, the GKE Ingress controller implements an Ingress resource as Google Cloud HTTP(S) load balancer and configures it according to the information in the Ingress resource and its associated services. For more information, see Configuring Ingress for external load balancing.
A Kubernetes Ingress resource can be used only when your applications serve traffic over HTTP(S). If your backend services use TCP or UDP protocols, you must use a network load balancer instead. This might be necessary, for example, if you need to expose your database as a service.
A BackendConfig is a custom resource definition that can provide additional prescriptive configuration that's used by the Kubernetes Ingress controller. When you deploy an Ingress object in your GKE cluster, the Kubernetes Ingress controller configures an HTTP(S) load balancer that routes incoming requests to the backend services as you specified in the Ingress manifest.
You can supplement the configuration of the load balancer with specifications like the following:
- Enabling caching with Cloud CDN.
- Adding IP addresses or CIDR allowlists with Google Cloud Armor.
- Controlling application-level access with Identity-Aware Proxy (IAP).
- Configuring service timeouts and connection-draining timeouts for services that are governed by the Ingress object in a cluster.
For more information about configuring the BackendConfig custom resource in GKE, see Ingress features.
Using a service mesh
A service mesh provides a uniform way to connect, secure, and manage microservices that are running in your Kubernetes clusters. For example, the Istio service mesh that you can add as a GKE add-on can manage service-to- service authentication and communication, enforce access policies, and collect rich telemetry data points that you can use to audit and administer your GKE clusters.
Key features that a service mesh provides are the following:
Traffic management. The service mesh allows you to define granular rules that determine how traffic is routed and split among services or among different versions of the same service. This makes it easier to roll out canary and blue-green deployments.
Built-in observability. The mesh records network traffic (Layer 4 and Layer 7) metrics in a uniform manner without requiring you to write code to instrument your services.
Security. The mesh enables mutual TLS (mTLS) between services. It not only provides secure channels for data in transit but also helps you manage the authentication and authorization of services within the mesh.
In summary, service meshes like Istio allow you to delegate system-level tasks to the mesh infrastructure. This improves the overall agility, robustness, and loose coupling of services that are running in your Kubernetes clusters.
For information about using a service mesh with Anthos, see About Anthos Service Mesh.
GKE nodes are provisioned as
in Compute Engine. As such, they adhere to the same
stateful firewall mechanism
as other instances. These firewall rules are applied within your network
to instances by
Each node pool
receives its own set of tags that you can use in rules. By default, each
instance belonging to a node pool receives a tag that identifies a specific
Kubernetes Engine cluster that this node pool is a part of. This tag is used in
firewall rules that Kubernetes Engine creates automatically for you. You can add
your own custom tags at either cluster or node pool creation time using
in the gcloud CLI.
For example, to allow an internal load balancer to access port 8080 on all your nodes, you would use the following commands:
gcloud compute firewall-rules create allow-8080-fwr \ --target-tags allow-8080 \ --allow tcp:8080 \ --network gke \ --source-range 18.104.22.168/22 gcloud container clusters create my-cluster --tags allow-8080
The following example shows how to tag one cluster so that internet traffic can access nodes on port 30000 while the other cluster is tagged to allow traffic from the VPN to port 40000. This is useful when exposing a service through a NodePort that should only be accessible using privileged networks like a VPN back to a corporate data center, or from another cluster within your project.
Connecting to an on-premises data center
You can use Cloud Interconnect or Cloud VPN for connecting to on-premises data centers. These options are not mutually exclusive, so you might use a combination, based on workload and requirements. The options are as follows:
Use Dedicated Interconnect to transfer large amounts of data between networks, with low latency.
Use Partner Interconnect if your data center isn't in a Dedicated Interconnect colocation facility. Google has more than 100 points of presence (PoPs) connecting to service providers across the world.
Use Direct Peering for workloads that require dedicated bandwidth, are latency sensitive, and need access to Google Workspace and supported Google APIs. Direct Peering is a Layer 3 connection, done by exchanging BGP routes, and thus requires a registered ASN.
Use Carrier Peering if you don't have a registered ASN, or have existing relationships with a preferred service provider. Carrier Peering is the same as Direct Peering, but done through a service provider.
Use Cloud VPN if IPSec encryption is required, or if you want to extend your private network into your private Compute Engine network. Cloud VPN is configured over Layer 3 interconnect and internet options (1, 2, and 3).
Managing cluster operability
This section discusses the key factors to consider when you're administrating and operating your GKE clusters.
Kubernetes resource quotas) provide constraints that limit the aggregate permissible resource consumption for each namespace in a cluster. If you have clusters with Kubernetes namespaces that isolate business functions or development stages, you can use quotas to limit a wide array of resources, such as CPU utilization, memory, or the number of pods and services that can be created within a namespace. To ensure stability of the control plane of your GKE clusters, Kubernetes automatically applies default, non-overridable resource quotas to each namespace in any GKE clusters that have five nodes or fewer.
You can use the Kubernetes LimitRange object to enforce granular constraints on the minimum and maximum resource boundaries that containers and pods can be created with. The following example shows how to use LimitRange:
apiVersion: v1 kind: LimitRange metadata: name: sample-limits spec: limits: - max: cpu: "400m" memory: "1Gi" defaultRequest: cpu: "200m" memory: "500Mi" type: Container
Pod disruption budgets
Pod disruption budgets (PDB) help guard against voluntary or accidental deletion of pods or Deployments by your team. PDBs cannot prevent involuntary disruptions that can be caused by a node going down or restarting. Typically an operator creates a PDB for an application that defines the minimum number of replicas of the pods for the application.
In an enterprise where developers work on multiple applications, mistakes do happen, and a developer or an administrator might accidentally run a script that deletes pods or Deployments—in other words, that deletes your Kubernetes resources. But by defining a PDB, you help ensure that you maintain a minimum viable set of resources for your Kubernetes applications at all times.
PDBs that you configure for your GKE clusters are honored during GKE upgrades. This means that you can control the availability of your applications during an upgrade. The following example shows how you can configure a PDB.
apiVersion: policy/v1beta1 kind: PodDisruptionBudget metadata: name: nginx-pdb spec: minAvailable: 4 selector: matchLabels: app: nginx
Managing Kubernetes upgrades
Keep your Kubernetes clusters on GKE updated to the latest version of Kubernetes that fits your requirements. You can choose to have your control plane or nodes upgraded automatically, or control the upgrades yourself.
You can review upgrade notifications in the console, in Anthos Security bulletins, and from cluster upgrade notifications. If you are upgrading nodes manually, we recommend that you trigger the version upgrade after you've reviewed the release content, and tested your applications in a sandboxed cluster that's running on the version that you want to upgrade to.
When the control plane of a zonal cluster is undergoing an upgrade, it is unavailable. This means that you are not able to interact with the API server to add or remove resources in your cluster. If you can't afford the downtime for upgrading a control plane, you can make the control plane highly available by deploying regional GKE clusters instead. With this approach, you can have multiple control planes that are spread across zones. When one control plane is being upgraded, any control plane requests to the API server are routed to the other control planes.
When an upgrade is applied, GKE applies a rolling update to the worker nodes—it systematically drains, brings down, and upgrades one node at a time when a new replacement node becomes available to respond to incoming requests.
The GKE node auto-repair feature manages the health checks of your GKE nodes. If any of the nodes are found to be unhealthy, GKE initiates the node-repair process.
If your GKE cluster has multiple node pools, the auto-repair feature gives you granular control over which node pools you want to enable node auto-repair for.
Autoscaling GKE clusters
Enterprises often experience varying incoming load on the applications that are running in their Kubernetes clusters. To respond to these business-driven changes, you can enable your GKE clusters to respond automatically and to scale up and down based on metrics.
Autoscaling includes multiple dimensions, as discussed in the following sections.
The GKE cluster autoscaler automatically adds and removes nodes from your cluster depending on the demand of your workloads. Cluster autoscaler is enabled for individual node pools. For each node pool, GKE checks whether there are pods that are waiting to be scheduled due to lack of capacity. If so, the cluster autoscaler adds nodes to that node pool.
Cluster autoscaler scales down or up based on resource requests. If a node is underutilized, and if the running pods can be scheduled on other nodes that have capacity, the underutilized node is drained and terminated.
You can set the boundaries for a node pool by specifying the minimum and maximum nodes that the cluster autoscaler can scale to.
Node auto-provisioning enables the GKE cluster autoscaler to automatically provision additional node pools when the autoscaler determines that they're required. The cluster autoscaler can also delete auto-provisioned node pools when there are no nodes in those node pools.
Node auto-provisioning decisions are made by the GKE cluster autoscaler based on a number of factors. These include the quantity of resources requested by pods, pod affinities that you have specified, and node taints and tolerations that are defined in your GKE cluster.
Node auto-provisioning is useful if you have a variety of workloads running in your GKE clusters. As an example, if your GKE cluster has a GPU-dependent workload, you can run it in a dedicated node pool that's provisioned with GPU-capable nodes. You can define the node pool scaling boundaries by specifying a minimum and maximum node pool size.
For more information about node auto-provisioning and when to enable it, see Using node auto-provisioning.
Horizontal Pod autoscaling
Kubernetes lets you create a Horizontal Pod Autoscaler that lets you configure how your Kubernetes Deployments or ReplicaSets should scale, and what metrics the scaling decision should be based on. By default, the Horizontal Pod Autoscaler controller bases the autoscaling decisions on CPU utilization. However, the Horizontal Pod Autoscaler controller can compute how pods should scale based on custom metrics as well, such as an HTTP request count. For an Horizontal Pod Autoscaler to respond to custom metrics, additional monitoring instrumentation is usually required.
Vertical Pod autoscaling
The Vertical Pod Autoscaler feature in GKE clusters lets you offload the task of specifying optimal CPU and memory requests for containers. When necessary, Vertical Pod autoscaling tunes the resource allocations that are made to containers in your cluster. Vertical Pod autoscaling lets you optimize resource utilization for clusters by optimizing at the container level on each node. It also frees up administrative time that you would otherwise have to invest in maintaining your resources.
Vertical Pod autoscaling works in tandem with the node auto-provisioning feature that's described in the next section.
Due to Kubernetes limitations, the resource requests on a Pod can be changed only when a Pod is restarted. Therefore, to make changes, Vertical Pod autoscaling evicts the pod. For more information, see the GKE and Kubernetes documentation.
Autopilot means that GKE provisions and manages the cluster’s underlying infrastructure on your behalf. With Autopilot, items such as the following are managed:
Nodes and node pools
Node image types
Networking features such as cluster type and CIDR ranges
Security features such as Workload Identity or Shielded VM
Autopilot is useful if you want to reduce your operational load, and do not require the ability to configure specific items for more complex workloads.
Learn more about best practices for hardening clusters.
Explore reference architectures, diagrams, tutorials, and best practices about Google Cloud. Take a look at our Cloud Architecture Center.